x-travel: 730 mmy-travel: 730 mmz-travel: 800 mmControl: Professional 6 : 60 St.total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 730 mmy-travel: 730 mmz-travel: 800 mmControl: Professional 6 : 60 St.total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 800 mmy-travel: 750 mmz-travel: 770 mmControl: Fanuc type: PRO-3 tool taper: HSK 100power capacity: 30 kWturning speeds: 10000 U/minrapid traverse: 35 m/minTool changer: 90 Pos.Cooling through the spindle: 70 barsize of pallet: 630x630 mmTable load: 1200 kgrotary table tiltable: 1 Gradtype of pallet-changer: 2 total power requirement: kWweight of the machine ca.: 15 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 800 mmy-travel: 750 mmz-travel: 770 mmControl: Fanuc type: PRO-3 tool taper: HSK 100power capacity: 30 kWturning speeds: 10000 U/minrapid traverse: 35 m/minTool changer: 90 Pos.Cooling through the spindle: 70 barsize of pallet: 630x630 mmTable load: 1200 kgrotary table tiltable: 1 Gradtype of pallet-changer: 2 total power requirement: kWweight of the machine ca.: 15 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 900 mmy-travel: 800 mmz-travel: 970 mmControl: Fanuc type: PRO-3 tool taper: HSK 100power capacity: 30 kWturning speeds: 12000 U/minrapid traverse: 50 m/minTool changer: 90 Pos.Cooling through the spindle: 70 barsize of pallet: 630x630 mmTable load: 1200 kgrotary table tiltable: 1 Gradtype of pallet-changer: 2 total power requirement: kWweight of the machine ca.: 20 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1000 mmy-travel: 1000 mmz-travel: 950 mmControl: FANUC total power requirement: - - - kWweight of the machine ca.: - - - tdimensions of the machine ca.: - - - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1300 mmy-travel: 600 mmz-travel: 800 mmcontrol: Heidenhain TNC 530 table dimensions: 1030 x 630 mmturning speed range: 10000 U/minpower capacity at 60% / 100 % load: 30 / 17 KWmax. torque at 40% / 100% load: 190 / 120 Nmfeeds x/y/z: 30 m/mintool taper: HSK A63 tool magacine with: 80 Plätzenrotary table diameter: 630 mm: 40 barslewability of milling head: +/- 105 °table load: 2,50 ttotal power requirement: - kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: - m2022 Spindle overhaul5-axis BAZ With:- HEIDENHAIN iTNC530 control- swivel head +/- 105- electronic handwheel,- NC rotary table integrated (dia. 630mm)- Coolant system, coolant through the spindle 40bar- paper belt filter- tool changer 80-fold (HSK A63)- direct measuring system in x,y,z- Tool breakage control & length measurement- Machine on: 000h Spindle run: 0hThe data for this ad was created with Mod ...
Matec 30 L, Year of construction 2010, Control Heidenhain iTNC 530, travel X/Y/Z1300/600/700 mm, spindle speed up to 12,000 rpm, Recording HSK 63 - A, Elketr. Handwheel IKZ 20 bar, paper tape filters, Ww 80 fold, Full cladding working chamber, you. Measuring systems, Conveyor bellows with steel slats, 3D probes, Laser measuring device,
x-travel: 2000 mmy-travel: 600 mmz-travel: 700 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Sinumerik 840D80-fold automatic tool changerchip conveyorTechnische Daten / technical details:X-Weg / X-travel 2000 mmY-Weg / Y-travel 600 mmZ-Weg / Z-travel 700 mmSpindelaufnahme / spindle taper HSK 63A Drehzahlbereich / spindle speed 20-9000 UpM /rpmTischaufspannfläche / table clamping area 3000x420 mmWerkzeugwechselmagazinplätze / number of tool places in changer 80 Antriebsleistung Spindel 40%ED / drive capacity spindle 40%ED 15 kWGewicht ca. / weight 15000 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution o ...
x-travel: 600 mmy-travel: 410 mmz-travel: 470 mmwork height max.: 620 mmtable surface area: 600x380 mmnumbers of pallets: 2 turning speeds: 30-7000 U/minspindle diameter: 75 mmTool changer: 30 Control: Matsuura type: MX 3 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1500 mmy-travel: 650 mmz-travel: 650 mmsize of pallet: 1740 x 650 mmspindle taper: SK 50 spindle turning speed range: 25 - 6000 U/minfeeds longditudinal/cross/vertical: max. 8 mm/minrapid traverse longitudinal and cross: 26 m/minrapid traverse vertical: 20 m/minspindle throat: 665 mmdistance spindle nose and table: 200 / 850 mmdrilling in full material: 50 mmøthreading: M 45 ATC: 60 Postool diameter: 125 mmwotkpiece diameter with 2 vacant positions: 260 mmworkpiece length: 400 mmweight of tools max.: 20 kgspindle drive: 18,5 kWmax. torque on the spindle: max. 758 NmAccessories: chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
MAZAK MTV 414/22B good condition, Control: MAZATROL M-PLUS Specifications: Table size: 900x410mm Table load: 500 kg. Rapid traverse speed: X-axis: 26 m/min. Y-axis : 26 m/min. Z-axis: 20 m/min. Spindle: DIN 69871 Tool holder: SK40 Speed: 50 - 7,000 1/min. Tools: 22 Documentation available.
x-travel: 510 mmy-travel: 510 mmz-travel: 460 mmcontrol: Mazatrol Fusion 640M Main spindle:: Max. rpm: 12.000 min/-1power capacity - main spindel: 22 / 15 kWtool taper: ISO 40 Spindle diameter: 80 mmAccelaration: 0 - 12.000 min/-1 : 1,7 sectable surface area: 500 x 400 mmT-slots: 5 x 18 mmT-slot - distance: 80 mmdistance spindle /table: 190 - 650 mmmax. workpiece height: 500 x 500 x 405 mmmax. table load: 300 kgSwivel range A-Axis: +30 / -120 °rotation range c-axis: +/- 360 °Tool-Presetter:: number of toolpositions: 40 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 125 mmmax. tool length: 300 mmmax. tool weight: 8 kgchange-time chip to chip: 4,5 secfeeds:: feed speeds: X/Y/Z: 1 - 50.000 mm/minrapid traverse: X/Y/Z: 50 m/minIndexing: A + C: 0,001 °switching time: 90°: A/C: 1,9 / 1,5 sectotal power requirement: 51 kVAweight of the machine ca.: 7,5 tdimensions of t ...
x-travel: 700 mmy-travel: 715 mmz-travel: 850 mmControl: FANUC 16i-MB table-size: 500 x 500 mmtable weight: 500 Kga-axis: +45 / -135 °c-axis: 360 °distance table / middle of spindle: - mmnumber of spindle speeds: 10000 U/min/rpmtool taper: ISO 40 spindle drive: 18,5 / 22 kWrapid travel x/y/z: 70 m/minTools changer: - pos.dimension of workpiece: dia 725 mmtotal power requirement: - kVAweight of the machine ca.: 21 tdimensions of the machine ca.: mThe machines of the Clock series can also be used as 5-axis multitasking machines.The Clock series is characterized by high speed and precision.paired with a very stable machine concept. Thanks to the fasttool change and pallet exchange, the machines achieve a very highproductivity. As 5-axis version the Clock 700 is equipped with a very stableSwivel table equipped. The swivel table is double on the axesand thus guarantees the optimal absorpti ...
: 1050 mm: 600 mm: 600 mm: 1200x600 mm: ISO 40 : 12.000 U/minMotor Capacity: 7,0/10,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0760 mm: 440 mm: 460 mm: 900x410 mm: ISO 40 : 12.000 U/minMotor Capacity: 7,0/10,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0760 mm: 440 mm: 460 mm: 900x410 mm: ISO 40 : 12.000 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mmy-travel: 450 mmz-travel: 450 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Heidenhain iTNC530NC swivel-rotary table (B-axis and C-axis)pallet changing device UPS 320mm x 320mm30-fold automatic tool changerelectronical hand wheelcoolant through spindle device (IKZ)chip conveyorcoolant deviceTechnische Daten / technical details:Verfahrweg X / X-Travel 600 mmVerfahrweg Y / Y-Travel 450 mmVerfahrweg Z / Z-Travel 450 mmB-Achse Schwenktisch / B-axis swivel table -115 / +30 °C-Achse Rundtisch / C-axis rotary table 360 °Tischgröße / table size 320 x 320 mmWerkzeugschaft / spindle taper HSK 63 Drehzahlbereich / spindle speed 100-20000 UpM /rpmWerkzeugwechsler / tool changer 30 fach /foldGewicht der Maschine ca. / weight ca. 9000 kgTechnische Daten, Zubehör ...
x-travel: 900 mmy-travel: 630 mmz-travel: 500 mmcontrol: Heidenhain total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: MIKRON Type VCE 1000 Pro Year of construction 2002 Control Heidenhain TNC 426 Machine weight approx. 5 t. Tool holder SK 40 Spindle speeds 14,000 rpm x-travel 1015 mm y-travel 508 mm z-travel 675 mm max. table load 1000 kg Space requirement approx. 2.86 x 2.60 x 2.70 m Number of tools in the magazine 24 Pos.
x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmworking length X: mmworking length Y: mmworking depth Z: mmWorkpiece dimensions: mmWorkingpiece thickness from to: mmMotor output: kWNumber of axles: St.Number of milling agregates: St.Number of heads vertical: St.Number of heads horizontal: St.Overall size: mmWeight: kgYear: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 650 mmy-travel: 560 mmz-travel: 650 mmtable surface area: 400 x 400 mmcontrol: Fanuc 18i-M spindle turning speed range: 120-12000 U/min: ja/yes hand wheeltype of pallet-changer: 2 Cooling through the spindle: 10 barchip conveyor: ja/yes feed: 670 mm/mindistance work spindle /surface of the table: 800 mmtable load: 400 kgtoolpiece magazine: chain magazine: 60 BT 40b-axis: 360 1°rapid traverse:: 40 m/minfeed: 1-40.000 mm/mintool changing time: 1,3 sec tool/tooltool changing time: 3,8 sec chip/chiptotal power requirement: 22,4 kWweight of the machine ca.: 10,5 tdimensions of the machine ca.: 5 x 3,3 x 3 m (LBH)Machining centre - Horizontal Mitsubishi M-H4B, year of construction 1998,good ondition, regularly maintained.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
travel -x axis: 1.400 mmtravel -y axis: 1.200 mmtravel -z axis: 1.350 mmcontrol: FANUC - MSX-701III numbers of positions in the tool changer: 60 tool taper: HSK 100 max. Spindle speed: 8.000 U/min.max. tool length: 800 mmmax. tool weight: 30 kgMilling machining centers - horizontal | MORI SEIKI - NH8000 DCGequipped with additional 4th axis.Equipment:- B-axis (rotary table): 360,000 X 0.0001,- 2-fold pallet changing system,- Pallet dimensions 800 mm x 800 mm,The machine is in a well-maintained conditionwith approx. 30.000 (h) Power-On hours.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MORI-SEIKI | NH 8000 | NH8000DCG | NH-8000The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mmy-travel: 400 mmz-travel: 500 mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Mitsubishi M70pallet changing device4. axis (dividing head)24-fold automatic tool changercoolant through spindle devicechip conveyorTechnische Daten / technical details:X-Weg / X-travel 600 mmY-Weg / Y-travel 400 mmZ-Weg / Z-travel 500 mmSpindelaufnahme / spindle taper SK40 Drehzahl / spindle speed 12000 UpM /rpmTischaufspannfläche / table clamping area 2x 700x400 mmWerkzeugwechselmagazinplätze / number of tool places in changer 24 Antriebsleistung Spindel / drive capacity spindle 7,5 kWGewicht ca. / weight 6600 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.The data ...
x-travel: 2120 mmy-travel: 1000 mmz-travel: 850 mmControl: Fanuc table surface area: 3600x1300 mmdividing head: CNC Tool changer: 60 Postotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ertikal machining center, used, from location vertical machining center, used, Model/ model: VS 500 SPEED Fabr./ make: NORTE Year built/ year: 1999 Control/ control: SIEMENS 840D x-Way /x-travel 2000 mm y-way / y-travel 500 mm z-way / z-travel 500 mm Feed: 1 - 8000 mm/min Table size / table-size 2120 x 550 mm Table load / table load 2000 kp Rapid gear X-axis / rapid traverse X-axis 40 m/min Rapid gear Z-axis/ rapid traverse Z-axis 20 m/min Tool holder / tool taper HSK 63 A Spindle speeds - infinitely variable/ spindle turning speed 0 - 15000 rpm Spindle drive/spindle motor 20 kW Spindle bearing diameter / spindle bearing diam. 70 mm Position accuracy / position accuracy: 0.020 mm Control SIEMENS 840D Tool diameter: 63 / 126 mm Tool Magazine: Chain Magazine/ toolpiece magazine: 40 pieces Total power req ...
x-travel: 560 mmy-travel: 610 mmz-travel: 560 mmcontrol: OSP total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1040 mmy-travel: 508 mmz-travel: 560 mmControl: Okuma type: OS 5020 M Table load: 1000 kgspindle taper ISO: 50 turning speeds: 5000 U/mintable surface area: 508X1300 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Posmill C 1050 Year of construction : 2014 Control : Heidenhain iTNC 530 Vertical machining center X-axis : 1050 mm Y-axis : 530 mm Z-axis : 630 mm Table size : 1150 x 560 mm Spindle speed : 10,000 rpm Tool changer : 30-fold Tool holder : SK 40 Machine hours approx. : 27,000 h Spindle hours approx. : 9,800 h IKZ 20 bar with belt filter system Yaskawa robot Motoman, control MH 12/DX 200 Workpiece Measuring System 25.10-HDR Electronic handwheel
x-travel: 710 mmy-travel: 610 mmz-travel: 610 mmcontrol: Fanuc total power requirement: kWweight of the machine ca.: 11500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Automatic controller Controlled by PC Main drive Spindle speed range 18000 This RAPID MFC EVOLUTION II universal machining center was manufactured in 2009. It is equipped with a computer-controlled control unit. The spindle speed is 18,000 rpm.
x-travel: 1050 mmy-travel: 560 mmz-travel: 520 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mHeidenhain iTNC530 CNC controlwith 4. Axis (NC-dividing head)electronical handwheel24-fold tool changercoolant devicechip conveyorTechnische Daten / technical details:X-Weg / X-travel 1050 mmY-Weg / Y-travel 560 mmZ-Weg / Z-travel 520 mmSpindelaufnahme / spindle taper HSK 63A Drehzahl / spindle speed 10000 UpM /rpmTischaufspannfläche / table clamping area 1250x515 mmWerkzeugwechselmagazinplätze / number of tool places in changer 24 Eilgang X,Y,Z / rapid feed X,Y,Z 30/30/20 m/minAntriebsleistung Spindel / drive capacity spindle 16 kWGewicht ca. / weight ca. 4900 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the ...
x-travel: 1200 mmy-travel: 600 mmz-travel: 700 mmcontrol: HEIDENHAIN TNC 426 M turning speeds: 20-6300 U/mintable load: 800 kg: 1200x630 mmtool taper: SK40 : 4 height of the machine: 2950 mmweight of the machine ca.: 8800 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1200 mmy-travel: 600 mmz-travel: 700 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m- milling head/spindle retrofit in the year 2022 for 28.000 Euro- CNC control Heidenhain iTNC530- NC swivable milling head: B-axis full NC-axis A-axis horizontal/vertical- NC-rotary table (C-axis)- tool changer for 72 tools- chip conveyor- electronical hand wheel- coolant device (coolant through spindle device 20bar)Technische Daten / technical details:Verfahrweg X längs / X-Travel longitudinal 1200 mmVerfahrweg Y quer / Y-Travel cross 600 mmVerfahrweg Z vertikal / Z-Travel vertical 700 mmC-Achse Rundtisch / C-axis rotary table 360 °B-Achse / B-axis +-90 °Rundtischgröße / rotary table size 800 mmWerkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 0-6300 UpM /rpmAnzahl der Werkz ...
x-travel: 1200 mmy-travel: 600 mmz-travel: 700 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m- CNC control Heidenhain TNC426- swivable milling head (horizontal / vertical)- NC-rotary table (C-axis)- tool changer for 32 tools- chip conveyor- electronical hand wheel- coolant device (coolant through spindle device 20bar)Technische Daten / technical details:Verfahrweg X längs / X-Travel longitudinal 1200 mmVerfahrweg Y quer / Y-Travel cross 600 mmVerfahrweg Z vertikal / Z-Travel vertical 700 mmC-Achse Rundtisch / C-axis rotary table 360 °Fräskopf / milling head +-90 °Rundtischgröße / rotary table size 800 mmWerkzeugschaft / spindle taper SK40 Drehzahlbereich 2-stufig / spindle speed (2-steps) 20-6300 UpM /rpmAnzahl der Werkzeugplätze / tool places in ATC 32 fachAntriebsleistung Spindel ...
x-travel: 440 mmy-travel: 290 mmz-travel: 270 mmControl: Fanuc 21i-MB spindle turning speed range: 12000 U/mintool piece magazine with: 10 table-size: 500 x 320 mmdistance table - lower edge spindle: 180 - 450 mmboring range:: dia 22 -26 thread: M 14 - M 20 workpiece weight max.: 150 kgspindle drive: 5,5 / 7,5 kWtotal power requirement: 12,5 KVAweight of the machine ca.: 1,5 tdimensions of the machine ca.: 1,2 x 2,2 x 2,3 mequipped with:- CNC control FANUC 21i-MB- tool changer 10-fold (Iso 30)- Internal coolant supply- coolant tank- chip box2 machines available, 2nd machine without IKZ!- 1 Set of Tools for each machine- Working Hours: 16.000h Control OnThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 7256 Type: RFM 600/2 Producer: Röders TEC Created: 2000 Parameters: Work table length: 700 mm Work table width: 550 mm X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 300 mm
x-travel: 3800 mmy-travel: 2000 mmz-travel: 670 mmControl: Siemens type: 840 D slsurface area: 3000x1800 mmmilling spindle: 120 KWturning speeds: 30.000 U/mintool holder: HSK 63 Tool changer: 124 Posc-axis: angular milling head: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
General: Year of construction: 2004 Travel: X 420 mm, Y 350 mm, Z: 200 mm Spindle speed 6,000 – 40,000 rpm Tool changer 16-fold Tool holder HSK-E25 Weight 5,800 kg Other equipment and included accessories: Blum automatic tool length measuring system Oil mist extraction Tool shrink machine Various tool holders
Table clamping area: 600 x 1300 mm Travel x/y/z: 810/580/560 mm Spindle holder: SK 40 ISA Spindle speeds: 8000 rpm Number of toolslots: 40 pieces Feeds: 24000 mm/min Spindle drive: 25 kW electr. Connection: 380/400 V kW Space requirement: 3200 x 2500 x 2900 mm Weight: 9000 kg Control: SIEMENS 810 EN
Manufacturer: SPINNER Type U5-630 Year of construction 2018 Control Heidenhain iTNC 630 Tool holder SK40 x-travel 630mm Y-travel 530mm z-travel 465mm Speed range 15,000 1 rpm max. table load 500 kg Table size Ø 500 mm Number of tools in the magazine 54 pl. Internal coolant supply 70 bar 3D probe yes 5 axes simultaneously
x-travel: 650 mmy-travel: 500 mmz-travel: 530 mmtable surface area: 800 x 500 mmcontrol: FANUC 21 iMB control: mit FANUC MANUAL GUIDE spindle turning speed range: 60 - 8000 U/minspindle taper: SK 40 spindle taper: DIN 69871 A table load: max. 500 kgrapid traverse X/Y/Z axis: 30 m/minATC: 30 Posworkpiece diameter at full load: 80 mmtool diameter if 2 vacant positions: 120 mmtool length - max.: 250 mmweight of tools max.: 7 kgtotal power requirement: 30 kVAweight of the machine ca.: 4,5 tdimensions of machine L x W x H: 2,4 x 2,2 x 2,46 mAccessories: NC-dividing unit with tailstock MECA-DIVIMEK (Spain), DCH 160 C, 2 machine vices, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 650 mmy-travel: 650 mmz-travel: 650 mmcontrol: Siemens 840 D tool taper: SK 40 spindle turning speed - stepless: 10000 U/minpower capacity at 100 % load: 19 kWfeed X/Y/Z-axis: 82000 mm/minrapid traverse X/Y/Z: 40 m/minfeed force X/Y/Z axis: 12 / 14.000 NB-axis: 360 x 1 °table rotation speed: 25,00 U/mintable load: 300 kgsize of pallet: 400 x 500 mmtotal power requirement: 75 kVAweight of the machine ca.: 12,5 tdimensions of the machine ca.: 8,8 x 4,6 x 3 mHorizontal machining center with:- SIEMENS SINUMERIK 840D control system- 8-fold pallet changer (400x500mm)- coolant system with paper belt filter - IKZ- chip conveyor- cooling unit- B-axis 360 x 1°- tool magazine 240-fold (SK 40)- tool breakage controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 900 mmy-travel: 770 mmz-travel: 1000 mmControl: Siemens 840 D tool taper: SK 50 spindle turning speed range: 20 - 6000 U/minrapid travel x/y/z: 60 m/minMotor power: (60% ED) 30 kWmax. torque on the spindle: (60% ED) 1080 Nmpallet size:: 500 x 500 mmtotal power requirement: kWweight of the machine ca.: 21,0 tdimensions of the machine ca.: m- CNC-control SIEMENS 840 D- portable handwheel- 2-station pallet changer- autom. horizontal-vertical milling head- 60-station ATC- coolant equipment with paper band filter- coolant thru spindle 80 bar- oil cooler- NC-rotary table 360 deg.- Chip conveyorInterference circle diameter 1150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Double-spindle machining center with swivel axis One side 5.axes with swivel bridge and rotary tables. One side 4th axis, without swing bridge, 5th axis prepared. Workspace x-axis 400 mm y-axis (tool change position) 450 (700) mm z-axis 400 mm Swivel beam/counter bearing with face toothing ----- Number of spindles 2 Spindle spacing 400 mm Spindle speeds up to 17,500 rpm Power 40/ 100% ED 25/ 18 KW ----- Feed/rapid traverse 50,000 mm/min Tool magazine 2 x 60 tool slots Tool holder HSK 63 Equipment: - Expansion of the tool magazine to 2 x 60 tool positions per spindle - Oil distributor for NC rotary table - 5.Axis for one side - Extension of machine hydraulics - Increased clamping pressure to 250 bar - Connection to central coolant system - IKZ 70 bar - Automatic loading door - Pneumatic support control - Flushing package - Tool life monitoring -Probe - Art ...
General: Year of construction 2013 Control Fanuc Series 0i-MD Travel X 703 mm Y 603 mm Z 503 mm Working spindle 12,000 rpm Tool changer 40-fold Tool holder DIN40 Specifications: Table swivel +31.1° / -121.7° Table rotatable 360° Other equipment and accessories included: Preparation 3D probe
Machining center vertical Speed 1110 Manufacturer: TRIMILL BJ: 2010 Control Heidenhain ... TNC 530 Clamping table area... 1300x1200mm Axis X ... 1100mm Axis Y ... 1000mm Axis Z ... 700mm Spindle speed ... 30-14000 rpm. controlled axes... 3 HSK A80 Total power demand ... 56kVA Machine Weight... 14500kg Rush.. 20m/min L x W x H ... 4400x5500x3810mm Workpiece probe Heidenhain TS740 Magazine places 10 Spindle cooling only with air new spindle 2017 The machine is in good condition, possible to test under power.
Vertical CNC machining center Manufacturer POS Type PosMill 1100 Year of construction 2008 Control Heidenhain iTNC530 approx. 18,700 spindle hours Travel X/Y/Z 1100/600/400mm 10,000 rpm 40 fold tool changer IKZ Machine is in very good condition
A Union BFT 110 bench boring mill is being sold The bench boring mill can be purchased immediately and then picked up. Technical data can be found in the history, if you have any questions, please do not hesitate to contact us Mr. Jan Sadau 02683 309 204 jsadaustuertz.com x-travel: 1985 mm Y-travel: 1620 mm z-travel: 1960 mm Control for program Heidehain TNC 155: Tool holder: SK 50 Spindle diameter: 110 mm Table size: 1600 x 1400 mm Table rotation: > 360 degrees Table positioning 4 x 90 degrees Weight: 6.3 t Machine weight: approx. 25.4 t
x-travel: 1500 mmy-travel: 500 mmz-travel: 400 mmtotal power requirement: kWweight of the machine ca.: 19 tdimensions of the machine ca.: 6x3,45x3,15 mBrand: UnisignType: Uniport 4CNC brand: SiemensCNC model: SinumerikYear of make: 2005Table length: 2.200 mmTable width: 1.500 mmNumber of pallets: 2X: 1.500 mmY: 500 mmZ: 400 mmMachine dimensions: 6.000 x 3.450 x 3.150 mmMachine weight: 19.000 kg5 AxisThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.