lathes used for sale (2,985)

turning diameter over bed: 370 mmturning diameter over slide rest: 200 mmturning length: 1000 mmcentre height: 185 mmspindle bore: 56 mmtailstock quill taper MT: 4 turning speeds: 50 - 2000 U/minpower capacity: 4,0 kWweight of the machine ca.: 1,4 tdimensions of the machine ca.: 2,3 x 1,1 x 1,3 mCenter lathe200mm three-jaw chuckSize B Multifix tool post3 Multifix tool holdersEmergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weiler Commodor – lead and pull spindle lathe (partially overhauled, built approx. 1990) Condition: Partially overhauled, very good general condition Year of construction: approx. 1990 Manufacturer: Weiler Model No.: Commodor Machine Type: Lead and Pull Spindle Lathe Technical data (approx. information): Max. turning diameter over bed: 380 mm Max. turning diameter over support: 190 mm Max. turning length: 1000 mm Bar Passage: 56 mm Speed range: 25 – 2000 rpm Spindle Nose: A2-6 Drive power: 4.0 kW Tailstock: MK4 Automatic longitudinal and flat feeds: 0.011 – 0.80 mm/rev Thread ranges: Metric: 0.3 – 10 mm Inch: 80 – 2 3/4 G/" Diametrically Pitch: 80 – 5.5 Dp Module: 0.2 – 5 Dimensions (L x W x H): 2200 × 1200 × 1800 mm Weight: approx. 1500 kg ⚙️ Equipment & Accessories: 3-Axis Digital Display SINO (New)  ...

Manufacturer: Optimum Year of construction: 2024 Condition: as good as new, workshop tested Delivery time: immediately available Specifications Tip height: 165 mm Center width: 830 mm Circumferential diameter over bed: 330 mm Circumferential diameter over face slide: 208 mm Swivel length in the bed bridge: 430 mm Speed ranges: 16 steps, 70–2000 rpm⁻¹ Drive motor: 1.5 kW, 400 V, 50 Hz Spindle holder: Camlock DIN ISO 702-2 No.4 Spindle bore: 38 mm Spindle cone: MK5 Tailstock mount: MK3, quill stroke 110 mm Weight: approx. 512 kg Machine dimensions (LxWxH): 1685 × 745 × 1590 mm Gradients and feed Metric: 0.4-7 mm/rev (26 pitches) Inches: 56-4 Gg/1" (34 pitches) Longitudinal feed: 0.052–1.392 mm/rev (32 feeds) Face feed: 0.014–0.38 mm/rev (32 feeds) Accessories: Fixed bezel (Ø 6–50 mm) Rotating bezel (Ø 8–3 ...

multifix: ja centre distance: 1500 mmdocumentation: ja weight of the machine ca.: 3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Conventional precision lathe WEILER "CONDOR VC" With 3 axis digital display Siemens Year of Make: 2012 Spindle bore: 56 mm Center width: 800 mm Circumference Ø over bed : 205 mm Speed range: 30 – 3500 rpm With the following accessories: Multifix Tool Holder Chip backsplash wall with interior lighting Coolant Setup 3 jaw chuck 0 200 mm Feed protection Moving Lynette 0 approx. 150 mm Tailstock with extendable drill quill Operating instructions

Lathe LABOR E 300 Brand: LABOR Model: E 300 Year of construction: 1997 Chuck size: 370 mm Center height: 300 mm Maximum turning length: 5000 mm Bed length: 6250 mm Bar capacity (spindle bore): 100 mm Self-centering chuck: Yes Four-jaw chuck: No CE Certification: Yes Overall dimension: 8000 mm x 2000 mm x 1500 mm H Our internal ref. 787

Lathe LABOR E 300 Brand: LABOR Model: E 300 Year of construction: 1994 Chuck size: 380 mm Center height: 300 mm Maximum turning length: 4000 mm Bed length: 5250 mm Bar capacity (spindle bore): 100 mm Self-centering chuck: Yes Four-jaw chuck: No CE Certification: Yes Overall dimension: 7000 mm x 1500 mm x 1500 mm H Our internal ref. 779

Leopoldo Pontiggia V 350 Center height: 350 mm Maximum turning diameter: 700 mm Distance between centers: 6000 mm

Lathe Leopoldo Pontiggia PH 630 Center height: 850 mm Maximum turning diameter: 1600 mm Distance between centers: 5000 mm Overall dimension: 9000 mm x 2300 mm x 2200 mm H

2 pieces (identical) used lathes Turning center milling center INDEX R200 INDEX VirtualLine Year of construction 2011 and year of construction 2009 At that time, the original price of both machines together: €1,385,647.90 gross Regular service only from the manufacturer INDEX. Service and parts exchange alone between 17.04. and 05.08.2025 in the amount of € 96,305.41 (invoices are available for inspection). Therefore, the machines are in absolutely excellent condition. Spindle hours (as of 21.11.2025) Year of construction 2011: S1: 4,114 h S2: 3,064 h S3: 2,535 h S5: 4,170 h Spindle hours (as of 21.11.2025) Year of construction 2009: S1: 2,951 h S2: 953 h S3: 3,524 h S5: 5,990 h Turning-milling centre with roller bearing slide guides Work spindles can be moved on slides. Tool carrier integrated into recesses in the machine bed, all linear axes arranged at  ...

turning diameter over bed: 1030 mmturning diameter over slide rest: 800 mmturning length: 3200 mmturning diameter: 900 mmcontrol: FANUC 31i B : 165 mmspindle cone: ASA A1-15 travel -x axis: 470 mmtravel -z axis: 3235 mmrapid travel - longitudinal/face: 12 / 10 m/minMeasuring Speed: 3 - 1500 1/minspindle drive: 45 / 37 kWmax. workpiece weight between centres: 7300 kgmax.workpiece weight:each extra steadyrest: 1600 kgtail stock: tailstock adjustment: 3135 mmtailstock quill diameter: 160 mmtailstock quill stroke: 150 mmtailstock quill taper MT: 6 total power requirement: 64,44 kVAweight of the machine ca.: 22 tdimensions of the machine ca.: 7,36 x 2,77 x 2,78 mHigh-precision turning centre- 3-jaw chuck dia. 800 mm- FANUC 31iB CNC control- Tailstock- Hydraulic steady rest- 12-station tool turret (32 x 32 mm)- Chip conveyor- Coolant system- Tool setter- CEThe data for this ad was created wit ...

greates pass round over bed: 810 mmswing diameter over face slide: 560 mmcentre distance: 2000 mmbed width: 480 mmslide valve travel: 400 mmupper head travel: 180 mmturning tool - shaft cross cut: 32 x 25 mmpower capacity: 22 kWmax. torque on the spindle: 3200 Nmspindle head: Gr. 11, DIN 55027 spindle diameter in front bearing: 152,4 mmspindle bore: 106 mmturning speed range: 9 - 1800 U/minturning speeds: 24 longitudinal feeds:: 0,092 - 41 mm/Uface feeds: 0,046 - 20 mm/Umetric threading: 0,5-112 mminch threading: 1/4 - 56 G/1thread - module: 0,125 - 28 mmthread - DP: 1 - 224 Pitchtailstock quill diameter: 115 mmquill stroke: 225 mmtaper of tail spindle: MK 6 max. workpiece weight between centres: 2000 kgmax. workpiece weight -without tailstock: 750 kg3-jaw chuck: Röhm, Ø Overall size: ca. 4600x1900x1600 mmweight: ca. 4300 kgNumber of feed stages and threads: 99Accessories:3-axis digita ...

Key data: 370 mm, 600 mm

Machine Type: CNC Lathe Manufacturer: Okuma Type: LU300-2ST Year of Make: 2005 Control: OSP-E100L Delivery time: in stock Machinery  Parts conveyor belt and parts collection tray – workpiece chute with removal conveyor belt incl. electrical kit  2 disc turret with VDI40 (12 + 8 stations)  Power clamping cylinder for hollow chips – Hole in the drawbar 52mm  Extension Kit "D" – Kit one touch IGF-D  Open/close chuck while the spindle is running via M-Code  Reinforced coolant pump 8 bar  Coolant on A and B turrets can be switched via M function  Interface for connecting rod feed  Chip conveyor Technical details  Swing diameter over bed: 530mm  Swing diameter over slide: 380mm  Distance between the tips: 600mm  Max. turning diameter: 370mm  Max. turning length: 600mm  Travel X-axis: upper 260mm ...

Key data: 420 mm, 650 mm

Machine Type: CNC Lathe Manufacturer: Okuma Type: LB400M-1SC Year of Make: 2000 Commissioning: 2001 Control: OSP-U100L Spindle hours: 14502 hrs Delivery time: in stock Machinery - Interior extraction from Hengst Filtration (built in 2023) - Touchsetter, tool measurement - C-axis (main spindle) - Tool breakage and wear monitoring - 3-jaw chuck, Kitagawa B210, Ø250 - Tailstock available - Coolant supply, also available through the tool - Dialogue programming IGF - Chip conveyor (scraper) Technical details - Max. turning length: 650 mm - Max. turning diameter: 420 mm - X-axis travel: 300 mm - Travel Z-axis: 675 mm - Travel C-axis: 360° - Chuck passage: 72 mm - Spindle passage: 95 mm - Clamping cylinder passage: 95 mm - Tool holder: VDI 40 - Tool stations: Stations 12 - Spindle speed: 2800 rpm - Main spindle power: 22/30 kW - M-spindle ...

Offer 25432 Specifications: - Turning diameter 320 mm - Center width 750 mm - Largest turn – Ø over bed 550 mm - via flat slide 175 mm - Spindle bore 32 mm - Spindle holder - Pick-up cone of the tailstock quill MK 3 - Quill stroke 180 mm - 18 spindle speeds 85 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches -Thread - Module thread - Diametrical Pitsch thread -Arbor - Cheek chuck -Lunette - Drive 400 V / 2.2 kW - Space requirement approx. W 2100 x D 750 x H 1300 mm - Weight approx. 750 kg

The HARDINGE GS42 is a CNC lathe for the precise turning of hardened surfaces Reason for sale: Order lost before complete start of production ONLY 598 h Control: FANUC Oi-TF max. rotary Ø: 284 mm max. circumferential Ø: 457 mm Max. speed: 6,000 1/min Spindle bore: 42 mm Turret with 12 stations (VDI 30) (not driven) PERFORMANCE PLUS package - Linear glass scales for X and Z axes - Spindle cooler - Heat exchanger for motor and spindle. High-pressure coolant system, cooling by turret (20 bar) Heavy duty running tip VOP40P Complete System (Precision transducer)

Gildemeister GM42 AC Hirth, - Spindle drum locking by means of a triad of HIRTH-type rings, - Cross slide including drive in pos. 1, 2, 4, 5, - Hydraulic pickup spindle, - Internal flushing for pickup spindle, - Spindle stop attachment for pickup spindle, - Hydraulic slide for rear working with two positions in pos. 6, - Pneumatic part catcher, - Conveyor belt for finished parts, - 5x frontal spindles, rotating, with internal coolant supply, - AC threading device, - Bar feed exclusion device, hydraulic, - Chip conveyor, worm type, including magnetic filter, - High pressure coolant system 100 bar, - CO2 fire fight system Total Walther, Number of spindles: 6, Max bar diameter [mm]: 42, Spindle speed [rpm]: 500 - 2.700, Max. bar feed in one station [mm]: 130, Max. travel of toolspindles [mm]: 120, Max. stroke of cross slides [mm]: 59 (pos. 1, 2) | 52 (pos. 3, 4, 5, 6), Max. stroke  ...

Index MS 16C, CNC-Mehrspindelautomat, - single-NCU mit PCU, HSP Einzelantrieb, - INDEX-Steuerung SolutionLine, - Farbbilschirm 47 cm, - Signalleuchte Smartligth mit LED, - EG-Konform CE-Zeichen, max. Spindeldurchlass 16 mm, Schlitteneinheit 1.1, X-Achse und Z-Achse NC-gesteuert, Schlitteneinheit 1.2, X-Achse starr, Z-Achse NC-gesteuert, Schlitteneinheit 2.1, X-Achse starr, Z-Achse NC-gesteuert, Schlitteneinheit 2.2, X-Achse und Z-Achse NC-gesteuert, Schlitteneinheit 3.1, X-Achse und Z-Achse NC-gesteuert, Schlitteneinheit 3.2, X-Achse starr, Z-Achse NC-gesteuert, Schlitteneinheit 4.1, X-Achse starr, Z-Achse NC-gesteuert, Schlitteneinheit 4.2, X-Achse und Z-Achse NC-gesteuert, Schlitteneinheit 5.1, X-Achse und Z-Achse NC-gesteuert, Schlitteneinheit 5.2, X-Achse NC-gesteuert, Z-Achse starr, Schlitteneinheit 6.1, Z-Achse NC-gesteuert, Schlitteneinheit 6.2, X-Achse und Z-Achse NC-gesteuert, - ...

Control Siemens SINUMERIK 840D, C200-4D Speed 6000 1/min Travel X/Y/Z 280/280/145 mm- Number of revolvers: 1 with 6 seats Number of tool positions: 2x4 Conveyor Pallet Conveyor Belt Palettes

: 0350 mm: 196 mm: 0650 mm: 170 mm: 42 mm: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- incl. some tool holders- incl. live driven tool holder- Full C-Axis 360.000- Chip conveyor- Problem on Turret Revolver live tools

Tacchi HD3/140L CNC Schwerdrehmaschine mit Fräsfunktion. Jahr 2001. Gebaut für große Durchmesser, lange Wellen und anspruchsvolle Schruppbearbeitung mit zuverlässiger Präzision. Mit 95 kW Spindelleistung, einem Schwingdurchmesser über Bett von 2.000 mm und 8.000 mm zwischen den Spitzen bietet die Tacchi HD3/140L Kapazität und Steifigkeit für den kontinuierlichen industriellen Einsatz.Diese gebrauchte HD3/140L bietet die Kraft und Stabilität, die Sie für starke Schnitte, überzeugende Oberflächenqualität und weniger Rüstzeiten benötigen. Die 3-Bett-Konstruktion und die 1.400 mm Bettbreite erhöhen die Steifigkeit. Die volle C-Achse mit 360.000 Positionen und ein 22 kW Fräskopf ermöglichen vollständige Bearbeitung in einer Spannung, wodurch die Taktzeit und Handhabung reduziert werden. Käufer, die nach einer gebrauchten HD3/140L suchen, profitieren von der bewährten Zuve ...

Lathe Mazak Integrex E500 BJ 2021

turning diameter: 475 / 260 mmturning length: 1000 mmcontrol: Heidenhain Manual Plus turret head: 12 x VDI 30 total power requirement: 25 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 2,51,52 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cross slide in pos. 1, 2, 4, 5, Drive for cross slide in pos. 1, 2, 4, 5x axial spindle (pos. 1, 2, 3, 4, 5), Slide with axial micrometric adjustment in pos. 3, Pickup spindle, hydraulic in pos. 6, Spindle stop attachment for pickup spindle, Hydraulic double slide with two positions in pos. 6, Pneumatic workpiece unloading device, Swarf coneveyor, worm type with vibrating filter unit, Set of tool holders, Set of cams, Number of spindles: 6, Spindle speed [rpm]: 5.000, Working hours: 26.500, Auto bar loader: Iemca SIR 25P

turning diameter over bed: 500 mmturning diameter over slide rest: 320 mmturning length: 2100 mmcentre height: 250 mm: mmspindle bore: 60 mmspindle turning speed range: 11 - 2000 U/mintotal power requirement: 7,0 kWweight of the machine ca.: 2,9 tdimensions of the machine ca.: 4,3 x 1,2 x 1,3 mmLathes with:- 4-position tool post- 3-jaw chuck 315mm- Centering pointThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- HAASE Tool holder with inserts- 4 Chuck 400 mm- Chip conveyor- Documentation

turning diameter: 460 mmturning length: 795 mmcontrol: MORI SEIKI M730 BM Swing diameter face slide: 590/360 mmspindle passage: 80 mmTraverse X/Z:: 260/795 mmNumber of working hours: 19.552 hCutting time: 10.704 hspindle drive: 18,5 kWtotal power requirement: 40 kVAweight of the machine ca.: 6,4 tdimensions of the machine ca.: 3.994 x 3.056 x 2.187 mChip chuck Ø250 mm.Chuck sub-spindle Ø170 mm.Holder HAINBUCHchip conveyorsuctionBar feeder Hydrafeed Multiservo mod MSVmax. bar length 1,600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8761 Type: VDF Producer: Heidenreich & Harbeck Generated: Parameters: Maximum turning length: 1500 mm Equipment: Digital measurement

From a current recycling we offer you a well-maintained CNC lathe MIYANO BNE-65MYY incl. FMB bar feeder SL 80 V. Year of construction:2023 Condition: good Asking price: 180.000,00 VHB Original price: 284.000,00 Location: 78628 Rottweil Equipment / accessories / other information: See appendix Asset Manager: M. Vorkötter Phone: 0202-257273152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. The sale is without warranty Subject to prior sale