lathes used for sale (3,059)

turning diameter over bed: 340 mmturning diameter over slide rest: 177 mmturning length: 630 mmspindle turning speed - stepless: 55-3000 U/minweight of the machine ca.: 1.55 tdimensions of the machine ca.: 2 x 1 x 1.6 mDigital read-out HEIDENHAINMisc.accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gildemeister G20, 6-Spindel-Portal-Drehautomat, GILDEMEISTER 20, Maschine komplett überholt, Elektrik - neu, PLC – neu, Mechanik - generalüberholt -, Geometrieprotokoll – wie Neumaschine –, CE – Konformitätserklärung, einschl. elektrische Standardausrüstung, Grundausstattung der Maschine:, 1 Tippbetrieb zum Einrichten, 1 automatische Zentralschmiereinrichtung, 1 Kühlmitteleinrichtung einschl. Pumpe und Antrieb, Behältervolumen ca. 650 L, 1 Werkzeugspindelführungsblock, 1 Antriebsgruppe für rotierende Werkzeugspindeln einschl. Gewindeschneidgetriebe für jede Werkzeugspindelposition wahlweise:, - a) Gegenläufig zum Schnellbohren, - b) Synchronlaufend, - c) Zum Gewindeschneiden bzw. Reiben, 2 Planschlitten mit unabhängigen Planvorschub, 4 Kreuzschlitten mit unabhängigem Plan- und, (Längsvorschub als Option) + 1 Maschinen-, leuchte, 1 Paar Wechselräder für Spindeldreh ...

Cross slide in pos. 1, 2, 4, 5, Drive for cross slide in pos. 2, Pickup spindle, hydraulic in pos. 6, Mechanical double slide in pos. 6, Pneumatic workpiece unloading device, High pressure coolant system with chiller, Swarf coneveyor, worm type with magnetic filter unit, Set of tool holders, Set of cams, Number of spindles: 6, Spindle speed [rpm]: 5.000, Auto bar loader: Iemca PRA 52 F

A conventional center lathe is available. An on-site inspection is possible.

General CNC slant bed lathe Traub is available. Tool stations: 12, tool holder: VDI40, turning diameter: 180mm, max. swing diameter: 450mm, max. turning length: 490mm, bar capacity: 60mm, travel X/Z: 160mm/490mm, rapid traverse: 15m/min, feed rate: 10m/min, machine dimensions X/Y/Z: approx. 3100mm/2000mm/1800mm, weight: approx. 4250kg, control: Traub System TX-8. An on-site inspection is possible.

Mazak Quick Turn Smart 250M L Turning-Milling Center CNC Model Hersteller [manufacturer]: Mazak Germany Type [ type]: Quick Turn Smart 250M L Control unit: Mazatrol smart Incl. handwheel Baujahr[construction year]: 10/2016 Weight [weight]: 6500kg Approx. (L x D x H): 3.4m x 2.0m x 2.0m Full documentation is available. Various accessories after consultation. Top Zustand / condition From first hand, from Germany. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - upon receipt of invoice Prior sale, errors excepted. We ask for your order. Other machines and systems available from stock – please inquire. We look forward to seeing you.

Key data: 32 mm, 32 mm, 320 mm

Stock number: 4010 CNC lathe SWISS TYPE Manufacturer: TSUGAMI, Type: BO326E-II - 2016 Machines NO.: 23031A, Year of manufacture: 2016 Specifications: Size capacity 32 mm Ø Ma. turning length (fixed guide bush) 320 mm Ma. Turning length (Rotary guide bush) 70 mm Max. threading force of the main spindle M 10 Max. speed drilling capacity 12 mm Main spindle effect 3.7/5.5 kw Sub-spindle Sub spindle speeds 8000 rpm Spindle bore 32 mm Driven tool transformer 6000 ( 4800) - 1 kW pr/min Subspindle effect 2.2/3.7 kw Control Fanuc 32i-B Fabr. Axis Controlled X1-X2-Z1-Z2-Y1-Y2 Opreation time 6575 hours Length: 2400 mm, Height: 2000 mm, Width: 1500 mm, Weight: 3500 kg

faceplate diameter: 4.000 mmtravel -x axis: 4.500 mmtravel -z axis: 600 mmcontrol: Siemens Sinumerik 840D-sl feed range: 0 - 8.000 mm/minturning speeds: 1) 0,7 - 5,6 U/minturning speeds: 2) 2,8 - 22,4 U/minturning speeds: 2,1 - 56 U/mintool taper: Sauter Facing Lathe | ZERBST - DP05/W08 Scope of delivery:- Chip conveyor- Hydraulic unitThe ZERBST - DP05/W08 has been retrofitted in 2010.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: DP05W08 | DP05 W08 | DP05-W08The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An old, compact precision turret lathe Boley & Leinen is available. Speed: 4000rpm, tool stations: 6, center height: 90mm, distance between centers: 300mm, machine dimensions X/Y/Z: approx. 1500mm/800mm/1500mm, weight: approx. 500kg. An on-site inspection is possible.

Country of origin: Germany, L max mm: 1.600

turning diameter: 330 mmturning length: 650 mmspindle turning speed - stepless: 30-5000 U/minspindle taper: ASA A2-5 control: FANUC 18i-T The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis DN solutions LYNX 2100LMSA was manufactured in 2022. It features a maximum turning diameter of 300 mm and a turning length of 510 mm. The machine includes a 6-inch chuck size, a 12/24 station turret, and a sub-spindle for enhanced capabilities. If you are looking to get high-quality turning capabilities, consider the DN Solutions LYNX 2100LMSA horizontal turning machine we have for sale. Contact us for further details.

Inv. Num. : 9102 Type: Hi-TECH 230 BL YMC Producer: Hwacheon Created: 2019 Parameters: Control system: FANUC Hours: 6623 h Maximum turning length: 584 mm Maximum turning diameter: 400 mm Maximum turning diameter over bed: 750 mm Maximum spindle speed: 3500 1/min Weight: 6650 kg

Horizontal turning machine manufactured in 2002. This DOOSAN S 550 L features a maximum workpiece diameter of 550 mm and a spindle power of 22 kW. It includes a programmable tailstock and a 12” 3-jaw chuck, enhancing operational efficiency and precision. If you are looking to get high-quality turning capabilities, consider the DOOSAN S 550 L machine we have for sale. Contact us for further details.

Turning diameter: 430mm, max. swing diameter over bed: 760mm, max. turning length: 860mm, center distance: 990mm, travel X/Y: 280mm/860mm, speed: 3400rpm, chuck diameter: 12inch, tool stations: 12. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/1900mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible.

turning diameter over bed: 297 mmturning diameter over bed slide: 160 turning length: 500 mmshort taper holder: Größe 5 spindle bore: 36 mmspindle turning speed range: 30-3550 U/minnumber of speeds: 18 quill adjustment: 90 mmtailstock quill taper MT: 3 cross adjustment: +15 tailstock adjustment - manual: 500 mmtotal power requirement: kWweight of the machine ca.: 610 kgdimensions of the machine ca.: 1,4 x 0,7 x 1,2 mwedge bar chuck Forkardt: Ø 160 mmAccessories:Forkardt V-block chuck, Ø 160 mmCollet chuck,Collets,Steel Multifix system, size Awith 3 quick-change insertsIntegrated center pointChip guardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Siemens C 200 – 4D Turning diameter: 100 mm Turning length 280 mm 8-fold revolver with applied revolver Wkzg. 6-fold revolver with applied revolver Wkzg. Spindle speed 6000 min-1 Max. bar passage 60 mm Rear drilling unit for 5 stations Chip conveyor Knoll Coolant system

Spindle support for SUI 80 longitudinal direction

The machine is in good technical condition, after prior agreement it is possible to test it. Fanuc i Series, Dmax320mm, X175 Z330, 5,000rpm, 12 tool positions, Tool measuring system, Part catcher, 4 jaw inserts,, Clamping pliers, many accessories

The machine is in good technical condition, after prior agreement it is possible to test it. ideal machine for complete machining in one clamping (turning + milling). Equipment and parameters: - main spindle + counter spindle (complete machining from both sides) milling spindle with B axis Mazatrol SmoothG control 36-position tool magazine Capto C6 / PSC63 internal cooling large number of accessories (jaws, clamps, holders, etc.) a functional postprocessor for SolidCAM is included in the sale significant time and cost savings when introducing the machine into production

An old Colchester engine lathe is available. Center height: 216mm, swing diameter over bed/cross slide/in gap: 432mm/267mm/711mm, distance between centers: 2000mm, spindle bore: 76mm, speed: 1600rpm, bed width: 343mm. Machine dimensions X/Y/Z: approx. 3200mm/1100mm/1400mm, weight: approx. 2500kg. An on-site inspection is possible.

turning diameter: 340 mmturning length: 1000 mmcontrol: Mazatrol SmoothC total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details.

This 8-axis DMG GILDEMEISTER Sprint 32 linear was manufactured in 2003. It features a turning length of 120 mm and a turning diameter of 32 mm. The machine is equipped with a Fanuc 160i-B control and offers impressive spindle speeds of up to 8000 rpm. If you are looking to get high-quality multi-spindle turning capabilities, consider the DMG GILDEMEISTER Sprint 32 linear machine we have for sale. Contact us for further details.

This EMCO Turn 420 MC Plus was manufactured in 2005. It features a maximum turning diameter of 100 mm and a maximum part length of 600 mm. The machine is equipped with a powerful spindle speed range of 0–5000 rpm and a tool changer with 24 stations. If you are looking to get high-quality turning capabilities, consider the EMCO Turn 420 MC Plus multi-spindle turning machine we have for sale. Contact us for further details.

OIL LATHE STANKO SPINDEL BORE 300 mm

HAAS ST-30 CNC turning center was built in 2013 in the United States by HAAS AUTOMATION, INC. The machine, distinguished by its high reliability and precision, is perfect for both unit and series production. It is capable of performing a number of complex operations, such as precision turning or threading of workpieces. All these machining processes are performed inside a large, fully illuminated work area by means of a powerful spindle and cutting tools. The spindle, driven by a high-powered motor, rotates at a maximum speed of 2400 rpm and moves in two X,Z axes with feeds of 457 mm and 584 mm respectively. To guarantee maximum machining precision, each tool taken from the 12-position turret is continuously measured and calibrated by a measuring probe. The hydraulic tailstock, in turn, ensures precise positioning and support of the workpiece during the work cycle. The HAAS ST-30 feat ...

Description WEILER E110 conventional lathe with automatic cycle Machine unused in the guides, as only plastic parts were manufactured. Details Type E110 Year of construction 1998 Center width 3,000 mm Center height 550 mm Circumferential diameter over bed 1,100 mm Circumferential diameter over face slide 730 mm Bed width 600 mm Spindle head according to DIN 55027/55026 Gr. 15 Spindle diameter in the front bearing 235 mm Spindle bore 165 mm Machine dimensions 5,400 x 2,600 x 2,120 mm incl. documentation

This 9-axis TAKISAWA TM-2000Y2 CNC Horizontal Turning Center was manufactured in 2022. It features a twin turret configuration with dual Y-axis capability, allowing for simultaneous machining. The machine includes a sub-spindle for complete machining and is compatible with bar work. If you are looking to get high-quality turning capabilities, consider the TAKISAWA TM-2000Y2 machine we have for sale. Contact us for further details.

This 7-axis DMG Sprint 50 2T was manufactured in 2012. It features a maximum turning diameter of 50 mm and a turning length of 550 mm. The machine is equipped with two turrets, each with 12 driven tool stations, and offers a rapid traverse speed of 30 m/min. If you are looking to get high-quality turning capabilities, consider the DMG Sprint 50 2T horizontal turning machine we have for sale. Contact us for further details.