lathes used for sale (3,044)

Horizontal CNC lathe with tailstock manufactured in 2004. This Takisawa TS-35 features a maximum turning diameter of approximately 400 mm and a turning length of 1000 mm. It is equipped with a powerful 26.1 kW main spindle motor and a chuck size of 304 mm. If you are looking to get high-quality turning capabilities, consider the Takisawa TS-35 machine we have for sale. Contact us for further details.

Inv. Num. : 8986 Type: DH-250/4 Producer: WMW Created: 1983 Parameters: Length: 3400 mm Width: 2100 mm Height: 1600 mm Weight: 4800 kg

turning diameter: 240 mmturning length: 530 mmcontrol: Siemens 810 D Powerline swing diameter: 560 mmx-travel: 207,5 mmz-travel: 530 mmturning speeds: 6000 U/min: 12 Stk. total power requirement: --- kWweight of the machine ca.: 6,1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A CNC slant bed lathe Okuma is available. Chuck diameter: 200mm, swing diameter: 400mm, turning diameter: 300mm, turning length: 470mm, tool stations: 8. Machine dimensions X/Y/Z: approx. 4000mm/2150mm/2150mm, weight: approx. 5500kg, control: OSP 3000 L. Documentation available. An on site inspection is possible.

Cycles lathe Microturn BNC 1840 Description: Sell our very well preserved cycles lathe Microturn BNC 1840 with turning length 1000mm and FAGOR 8055i control. Technical data: - Tip height 230mm - Max. turning length 1000mm - Speed max. 4500 1/min

turning diameter: 300 mmturning length: 1700 mmswing diameter over bed slide: 600 mmtotal power requirement: 12,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fully functional CNC turning and milling center CNC Lathe Manufacturer: Index Type: G250 G 250 Year of Make: 2004 Location of the machine: 76661 Philippsburg The machine can be viewed on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your interest in advance.

Universal lathe STANKO 1M63/1250

turning diameter: max. 2.800 mmdiameter of spindle flange: 1.100 mmmax. swing diameter: 3.000 mmcontrol: 840 D sl SiemensMain spindle:: turning speed range - main spindle: max. 230 min/-1power capacity - main spindel: 206 kWmax. Torque: 53.000 Nmmax. load: - kgC-Axis: Tool Mount:: Rechts / Righttool taper: Capto C8 swivellable: B: 0 - 270 °Spindle speed - driven tool pos.: max. 6.000 min -1max. Torque: 120 NmTool Mount:: Links / Lefttool taper: Capto C8 tool magazin:: Rechts / Rightnumber of toolpositions: 41 pos.max. tool weight: 20 kgmax. tool length: 400 mmworkpiece diameter at full load: 150 mmtool taper: Capto C8 tool magazin:: Links / Leftnumber of toolpositions: 25 pos.workpiece diameter at full load: 150 mmmax. tool weight: 20 kgmax. tool length: 400 mmtool taper: Capto C8 axis stroke:: x-axis: 1: 2.700 mmx-axis: 2: 2.700 mmz-axis: ( 2x 1.000 ) mmfeeds:: rapid traverse:  ...

turning diameter: max. 3.800 mmdiameter of spindle flange: 1.900 mmmax. swing diameter: 3.800 mmcontrol: 840 D sl SiemensMain spindle:: turning speed range - main spindle: max. 100 min/-1power capacity - main spindel: 200 kWmax. Torque: 67.000 Nmgear box: 1:30 max. load: - kgC-Axis: Tool Mount:: Rechts / Righttool taper: Capto C8 swivellable: B: 0 - 270 °Spindle speed - driven tool pos.: max. 6.000 min -1max. Torque: 120 NmTool Mount:: Links / Lefttool taper: Capto C8 tool magazin:: Rechts / Rightnumber of toolpositions: 41 pos.max. tool weight: 20 kgmax. tool length: 400 mmmax. tool diameter: 120 mm0: 125 mmtool taper: Capto C8 tool magazin:: Links / Leftnumber of toolpositions: 25 pos.workpiece diameter at full load: 150 mmmax. tool weight: 20 kgmax. tool length: 400 mmaxis stroke:: x-axis: 1: 2.800 mmx-axis: 2: 3.200 mmz-axis: 1.000 mmfeeds:: rapid traverse: X: 32 / Z: 20 m/m ...

This 4-axis Okuma LB 3000 EXII was manufactured in 2022. It features a spindle speed of 5,000 rpm and a spindle power of 22 kW. The machine includes a 12-position motorized turret and a Y-axis travel of 120 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EXII horizontal turning machine we have for sale. Contact us for further details.

This 8-axis DN SOLUTIONS PUMA TT2100SYY was manufactured in 2023. As new, showroom model. It features a twin-spindle and twin-turret configuration, with a maximum spindle speed of 5,000 RPM and a bar capacity of 65 mm. The machine is equipped with 24 turret stations and high-rigidity linear roller guides for enhanced stability. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA TT2100SYY turn-mill centre we have for sale. Contact us for further details.

This 3-axis DN SOLUTIONS PUMA V8300MR vertical turning machine was manufactured in 2023. As new, showroom model. It features a maximum turning diameter of 830 mm and a turning length of 690 mm. The machine is equipped with a powerful spindle offering 2,592 Nm of torque and a rapid traverse of 20 m/min. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA V8300MR machine we have for sale. Contact us for further details.

This 7-axis TRAUB TNL 32-7 horizontal turning machine was manufactured in 2013. Ideal for precision turning operations, it offers robust performance and reliability. Consider the opportunity to buy this TRAUB TNL 32-7 horizontal turning machine. Contact us for more information.

This 7-axis TSUGAMI BS32CE-V was manufactured in 2008. It features a maximum turning diameter of 32 mm and a turning length of 250 mm. The machine is equipped with two spindles, offering main spindle speeds of 200 – 7000 rpm and sub-spindle speeds of 200 – 6000 rpm. If you are looking to get high-quality turning capabilities, consider the TSUGAMI BS32CE-V swiss type turning machine we have for sale. Contact us for further details.

The machine is in very good technical condition, testing is possible by prior arrangement.

Key data: 5000 mm, 8000 mm, 4000 mm

Berthiez Vertical Turning Lathe • Year of manufacture: 1982 • CNC type: older system (CNC axes) Dimensions and Working Parameters • Table diameter: 5000 mm • Maximum turning diameter: 8000 mm • Maximum turning diameter at center: 5000 mm • Maximum workpiece height: 4000 mm • Ram travel (T): 3600 mm • Saddle travel (TA): 650 mm Speed and Power • Table rotation range: 0.6 – 60 rpm • Table motor power: 140 kW • Maximum load on hydraulic support: 160 t • Ram feed speed: 400 mm/min • Saddle feed speed: 2500 mm/min • Spindle rotation for milling: 0.01 – 0.50 rpm • Positioning speed: 0.001 – 0.50 rpm Tool Carriages 1. Hand-Operated (Primary) Carriage • Kulannum section size: 360 × 360 mm • Axial travel (CA): 2500 mm • Horizontal travel (CB): 3400 mm • Tilt range (E-F): 15° – 45° 2. Side Tool C ...

Lathe Böhringer DUC 560 BJ 1995

CNC milling turning center OKUMA Multus B400 TECHNICAL FEATURES: Year: 2007 NC Type: OSP-P200L Distance between points: 1500 [mm] Maximum diameter Turning time: 710 [mm] Permissible diameter above the carriage: 710 [mm] X-axis travel: 690 [mm] Y-axis travel: -115 / +115 [mm] Z-axis travel: 1545 [mm] W-axis stroke: 1550 [mm] B-axis indexing accuracy: 0.001 [°] Maximum rotational speed Milling spindle: 6000 [rpm] Maximum power Milling spindle: 11 [kW] Maximum torque Milling spindle: 65.7 [Nm] Coolant milling spindle: HSK-A63 Tool magazine capacity: 40 Maximum length Tool Size: 300 [mm] Maximum diameter Tool No.:130 [mm] Maximum weight per tool: 10 [Kg] X-axis fast feed speed: 4000 [mm/min] Z-axis fast feed speed: 40000 [mm/min] Y-axis fast feed speed: 26000 [mm/min] W axis fast feed speed: 12000 [mm/min] Spindle Nose: JIS A2-8 Minimum speed. Spindle: 38 [rpm]  ...

The machine is in good technical condition, testing is possible by prior arrangement.

Key data: 254 mm, 700 mm

Turning milling center Manufacturer: DMG Mori Type NLX 2500/700 Control M730UM Mitsubishi with Celos Turning length 700mm 12 tool stations, all 12 of which are driven Y-axis Bar passage 91mm Program runtime Head1 4036h Cumulative cutting time Head 1 2058h Machine running time 8605h Bar loading magazine TOP Automazioni 3m Incl. tool package NP 64.000 euro Machine is in TOP condition

This 4-axis Romi C1000 was manufactured in 2020. It features a maximum diameter over bed of 1,000 mm and a distance between centers of 3,000 mm. The machine is equipped with a Siemens 828D CNC control system and has a rapid traverse of 8 m/min. If you are looking to get high-quality turning capabilities, consider the Romi C1000 horizontal turning machine we have for sale. Contact us for further details.

This 4-axis DOOSAN H310T was manufactured in 2006. It features a maximum turning diameter of 310 mm and a turning length of 230 mm. The machine is equipped with twin spindles and twin turrets, allowing for efficient machining operations. With a spindle speed of up to 3,500 rpm and a robust construction, this CNC turning center is designed for high productivity. If you are looking to get high-quality turning capabilities, consider the DOOSAN H310T machine we have for sale. Contact us for further details.

This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine includes a tool turret with 12 stations and a rapid traverse of 24 m/min in the X-axis. If you are looking to get high-quality turning and milling capabilities, consider the Hurco CNC TMX 8 MYSi turn-mill centre. Contact us for further details.

Center height: 700 mm Center width: 1800 mm Gr. Circulation Ø over bed/in offset: 1300/1740 mm Rotary Ø over support slide: 740 mm 12 spindle speeds: 3 - 135 rpm 12 feeds: 0.15 - 2 mm/rev Upper support adjustment: 350 mm electr. Connection: 380 V, 6.6 kW Weight approx.: 5.5 t Space requirement: 3800 x 1600 x 1700 mm

Key data: 42 mm

Equipped with Iemca Boss 545 barfeed and Mitsubishi M700 Control, the lathe has always worked with oil, in regular working order (just replaced bearings and ball screws of the X1/Z1 axes and 2 drives)

Key data: 1600 mm, 2000 mm, 1500 mm

Inv. Num. : 8971 Type: BT 1600 S2 Producer: TOS HULIN Created: 2018 Parameters: Switch-on hours: 11910 h Max. turning diameter: 2,000 mm Face plate diameter: 1,600 mm Max. workpiece height: 1,500 mm Max. workpiece weight: 12,000 kg Speed range faceplate: 2–315 rpm (2-stage infinitely variable control) Main drive SIEMENS: 58 kW Max. cutting force: 45,000 N Working stroke ram: 1,060 mm Feeds: Working feed: 1–4,000 mm/min Rapid traverse: 12,000 mm/min Feed per revolution: 0.001–50 mm/rev Threading: 0.01–400 mm/rev Dimensions and weight: Machine height: 5,655 mm Space requirement incl. protective cover: 8,685 x 5,325 mm Total weight: approx. 46,000 kg

Key data: 1250 mm, 1400 mm

Inv. Num. : 8970 Type: BT 1250 C2 Producer: TOS HULIN Created: 2016 Parameters: Switch-on hours: 15429 h Equipment: C-axis Powered tools Max. turning diameter: 1,400 mm Face plate diameter: 1,250 mm Max. workpiece height: 1,400 mm Max. workpiece weight: 8,000 kg Speed range faceplate: 2–400 rpm (2-stage infinitely variable control) Main drive SIEMENS: 44 kW Driven tools: 4–3,000 rpm Power tool drive SIEMENS: 22 kW Max. cutting force: 50,000 N Dimensions and weight: Machine height: 5,555 mm Space requirement incl. protective cover: 7,470 x 5,725 mm Total weight: approx. 34,000 kg Ideal for heavy-duty machining, energy plant construction and large rotationally symmetrical components.

DMG Turning lathe GILDEMEISTER CTX 510 ecoline V3

turning diameter: 370 mmturning length: 424 mmcontrol: Fanuc total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.