lathes used for sale (2,982)

: 0390 mm: 240 mm: 1250 mm: 190 mm: 54 mm: 5,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter 400 mm Turning lenght 800 mm Spindle speed 4000 rpm With C axis Controller Siemens 840D

DAEWOO LYNX 200B LATHE with FANUC control system

UGB-150 widht: 1435mm rangę diameter : ø600 do ø1500mm maks. distance: 1500mm

Key data: 330 mm, 1000 mm, 330 mm

Turning length: 1,000 mm Turning diameter: 330 mm above bed 160 mm over cross slide Spindle Passage: 52 mm Spindle speeds: 70 - 2,000 rpm Equipped with: - 1x fixed bezel, 1x rotating bezel - Zahrade Theorem - Clamping pallet - Cheek chuck protection - Coolant device Country of origin: Netherlands Machine LxWxH: 1,800 x 650 x 1,400 mm Machine weight: 750 kg

Key data: 430 mm, 1000 mm, 430 mm

Turning length: 1,000 mm Turning diameter over bed: 430 mm Turning diameter over slide: 255 mm Spindle speeds: 19 - 2,000 rpm Spindle bore: 56 mm Equipped with: - Various Multifix tool containers - Coolant device Country of origin: Germany Motor power: 7.5 kW Machine LxWxH: 360 x 103 x 130 cm Machine weight: 1800 kg

Key data: 870 mm, 3000 mm

Turning length: 3000 mm Turning diameter: 870 mm above bed 560 mm over cross slide Weight between tips: 3,600 kg without bezel 4,400 kg with 1 bezel 5,600 kg with 2 bezels Spindle speed: 0 - 900 rpm Spindle bore: 162 mm Control: Fagor Equipped with: - Extra jaw chuck on the rear side of the main spindle - 1 fixed bezel Ø420 mm - 1 rotating bezel - 4-jaw chuck Ø800 mm - 3-jaw chuck Ø 400 mm - 10 tool containers - Coolant and chip container at the rear - Machine documents Country of origin: Spain Motor power: 30 kW Machine weight: 9,000 kg Machine LxWxH: 5.1 x 2.4 x 2.0 mtr.

Key data: 270 mm, 470 mm, 270 mm

Turning length: 470 mm Turning diameter over bed: 270 mm Turning diameter over cross slide: 145 mm Spindle speeds: 56 - 4000 rpm Spindle Passage: 26 mm Digital Readout: On X and Y Axes Country of origin: Netherlands Engine power: 1.75 hp Machine weight: 900 kg Machine LxWxH: 1200 x 460 x 1200 mm

Key data: 3000 mm, 7000 mm, 3000 mm

Stock number 1020041 Machine Type: CNC Carousel Lathe Make HANKOOK Type VLC 30/70 Year of construction 2004/2016 retrofit Control type FANUC 18i-TB Face plate diameter 3,000 mm Max. turning diameter 7,000 mm Max. turning height 3,000 mm Max. workpiece weight 40 ton Max. speed of face plates (rpm) 1-80 Feed rate (mm/rev) max. 2,000mm/min Rapid traverse max. 8,000 mm/min. Total power (KW) 60/75 Kw Information With C-axis and driven tools Me WzW for 16 tools With chip conveyor

Control Fanuc 18i-TB Rotary diameter. [mm] 130 Turning length [mm] 110 General: Year of construction 2008 Control Fanuc 18i-TB Turning diameter 130 mm Turning length 110 mm Circumferential diameter 200 mm Workpiece height max. 110 mm Spindle: Motor spindle technology Speed 7,500 rpm Power 24 kW Torque 158 Nm C-axis 0.001° Clamping Cylinders Full-Clamping Cylinders Tool carrier (X/Z): Technology Star Turret Number of stations 12 pieces Tool holder VDI 40 Tool drive 6,000 rpm, 40 Nm X-axis 400 mm Z-axis 200 mm Equipment / Accessories: Direct displacement measuring systems (glass scales) Chip disposal chip conveyor Coolant supply high-pressure pump Automation of circulating workpiece storage Exhaust mist extraction Mechanically prepared

Circumferential diameter over bed ... 500mm Turning length ... 2000mm Max. workpiece weight ... 300kg Circumferential diameter via support ... 270mm Spindle bore ... 52mm Spindle speed ... 22-2000 rpm Main engine power ... 5.5kW L x W x H ... 3640x1100x1580mm Machine weight ... 1940kg The machine is in good condition, possible to test under power.

Mazak QTN 350M x 1200 Motorized Lathe :::TECHNICAL SPECIFICATIONS::: CNC Model: Mazatrol CNC Version: FUSION 640 T NEXUS Main spindle nose: ASA 8 Main spindle power: 22Kw Main spindle bar passage: 76mm Turning diameter: 420mm Turning length: 1173mm Number of main spindle speeds: 3300 Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 260mm First turret Z-axis travel: 1240mm Presetting: yes :::D DIMENSIONS AND WEIGHT::: Length: 3450mm Width: 2050mm Height: 2000mm Weight: 7500Kg

Tsugami BU20 Swiss-type lathe :::TECHNICAL SPECIFICATIONS::: CNC Model: Fanuc CNC Version: 16i - TB Main spindle power: 3.7Kw Main spindle bar passage: 20mm Headstock Stroke (Z1): 170mm Number of main spindle speeds: 8000 Number of linear axes: 7 Number of fixed tool slots for tool plate: 4 Number of live tool slots for tool plate: 3 Sub-spindle: yes Number of counter-spindle revolutions: 8000 Bar Passage: 20mm Number of fixed rear tools: 6 + 6 Refrigerant used: neat oil Chip conveyor: belt Machine equipment: the machine is supplied without bar loader :::D DIMENSIONS AND WEIGHT::: Length: 2712mm Width: 1401mm Height: 1728mm Weight: 3500Kg

12 position upper turret (6 are driven) -10 positionlower turret (5 are driven) - sub spindle - 2 x C axis - equipped with Lns Sprint S2 bar loader with front magazine, fixed and driven tool holders, manuals - Fanuc 18T Control

Circulation/rotation Ø over bed: 475 mmRotation/rotation Ø via cross slide: 260 mmSledge path plan: 260 mmcentre distance: 1000 / 1500 / 2000 mmpower capacity: 22 kWGear stages. m= manual / e= electric.: 2 e Spindle head DIN 55026 / DIN 55027: A6 / 6 Spindle Ø in front bearing: 115 mmspindle bore: 78 / 70 mmturning speed range (V-constant): 1 - 3.000 U/minfeed range flat: 1µ - 1.000 mm/Ufeed range lengthwise and thread: 1µ - 2.000 mm/URapid traverse plan/longitudinal: 5 / 10 m/mindiameter of quill: 70 mmquill travel: 120 mmquill inner cone: 5 MKThis machine is used for the production of individual parts and small batches from simple to the most complex contours.It is characterised by:--> Ease of operation Precision Working range

turning speeds: 6000 U/minx-axis: 550 mmz-axis: 200 mmrapid traverse: 30/20 m/minfeed: 11 m/mincontrol: Siemens 840 C total power requirement: 35 kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: m- speeds: [1/min.] : 6.000- torque [Nm]: 480- swing diam.: 290 mm- power: [kW] 34- chuck diam. 200 mm- turret: 12-fach, VDI 40, Sauter- driven tools 7,8 KW,- x -travel: 550 mm- z- travel: 200 mm- rapid travel: (X/Z) [m/min] 30 / 20- feeds: (X/Z) [m/min.] 11 KN- connected load: [KW] 36 kW- machineweight: [kg] 6.500- chip conveyor, pick up conveyor links,300mm wide, Auswurfhöhe 800mm- Messsystem direkt-linear, Glasmaßstäbe in allen Achsen, Heidenhain- parts conveyor for feeding parts into the machine- Specification:- Overhauled in 2007 for approx. €50,000, complete headstock replaced.- Feed unit replacedThe data for this ad was created with ModulMWS - the software solution of ...

: 0400 mm: 1250 mm: : 200 mm: 80 mm: 315 mm: 2700 U/min : D1-8 DIN 55029 : 73 mm: 140 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 15.666h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 102 mmcentre distance: 450 mmspindle bore: 25 mmspindle speed:: 220 - 2600 weight of the machine ca.: tdimensions of the machine ca.: mAccessories were not checked for completenessCabinets are not included in the scope of deliveryThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing dia.: 600 mmturning diameter: 310 mmturning diameter over slide: 355 mmspindle bore: 53 mmbar capacity: 45 mmturning speed range: 6000 U/minturning length: 388 mmtravel -z axis: 400 mmtravel -x axis: 220 mmturret (x-stations): 12 control: SIEMENS 828D (Touch) c-axis: 0,001° 0total power requirement: 20 kVAweight of the machine ca.: 4,5 tdimensions of the machine ca.: LTH 3,7 x 2,0 x 2,0 mIncludes preparation for automation (loading robot)Year of manufacture: 11/2017, delivery: 2018- Automatic door- 12-station tool turret, driven at 5,000 rpm- Workpiece catcher- RENISHAW touch probe, automatically retractable- Tailstock- Chip conveyor- Coolant pumpAccessories:Including collet chuckIncluding 2 x driven tool holders (radial + axial)Including 9 x fixed tool holdersIncluding USB & LAN interfaceIncluding manualsThe data for this ad was created with ModulMWS - the software solution of Lo ...

control: HEIDENHAIN MANUAL PLUS M turning diameter over bed: 320 mmcentre height: 160 mmcentre distance: 800 mmturning dia. over face-slide: 150 mmspindle bore: 50 mmspindle taper: DIN 55027/B6 spindle turning speed - stepless: 0-4000 U/mintotal power requirement: 7 kWdimensions of the machine ca.: 400x160x190 cmweight of the machine ca.: 2.2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 570 mmturning diameter over slide rest: 365 mmturning length: 1500 mmcentre distance: 1800 mmspindle turning speed range: 11-2240 U/minspindle bore: 62 mmweight of the machine ca.: 4 tMisc accessoriesMore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 270 mmturning length: 400 mmcontrol: FANUC 18i Manual Guide The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 200 mmturning length: 635 mmcontrol: SIEMENS 840D Powerline greates pass round over bed: 250 mmspindle turning speed range: 20-7000 U/minturret head: 2x 12 weight of the machine ca.: 10 tY- & B- axesMisc. accessoriesmore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 225 mmturning length: 656 mmcontrol: FANUC 31i B-NT-SmartX spindle turning speed range: 4500 + 6000 U/minturret head: 2x 24 12 angetriebenDimensions (L/W/H): 3500 x 3500 x 2800 mmweight of the machine ca.: 10 tY- & B- axesMisc. accessoriesmore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 425 mmcentre height: 200 mmcentre distance: 1500 mmturning diameter over slide rest: 235 mmturning dia. in gap: 470 mmspindle bore: 45 mmcamlock: D6 lead of leadscrew: 6 mmtailstock quill taper MT: 4 diameter of quill: 55 mmquill stroke: 160 mmweight of the machine ca.: 1.5 tnumber of spindle speeds: 36-2240 Digital read-outMisc accessoriesMore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: WEILER turning diameter over bed: 410 mmcentre height: 200 mmcentre distance: 1000 mmturning dia. over face-slide: 200 mmspindle bore: 54 mmspindle taper ISO: 55027/6 spindle turning speed - stepless: 4-3000 U/mintailstock quill taper MT: 4 diameter of quill: 65 mmquill stroke: 120 mmfeed - longitudinal/cross: 0-20 mm/minrapid traverse longitudinal and cross: 10/5 m/minspindle drive: 9/13 kWdimensions of machine: 2300x1200x1800 mmweight: 2.0 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 20 mmspindle passage: 24 mmturning length: 320 mmControl: CINCOM spindle turning speed - stepless: 200-10000 U/minturret head: weight of the machine ca.: 3.35 tdimensions of the machine ca.: 3.0x1.3x2.3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: FANUC TXP-200 FA turning diameter: 360 mmswing over bed: 600 mmswing diameter over bed slide: 450 mmturning length: 683 mmc-axis: indexing: 0.001 °turning speeds: -3000 U/mintool taper: VDI 40 Top turret tool hodler:: 12 tailstock quill taper MT: 5 quill travel: 100 mmfeed: 1-10 m/minrapid traverse X-axis: 20 m/minrapid traverse Z-axis: 24 m/minOverall size: 4450x2100x2350 mmweight of the machine ca.: 7200 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.