lathes used for sale (3,053)

A cycle-controlled CNC lathe Gildemeister is available. Center distance: 1500mm, max. turning length: 1500mm, swing diameter over bed/cross slide: 500mm/290mm, speed: 2800rpm, spindle bore: 70mm, spindle torque: 1050Nm, travel X/Z: 260mm/1600mm, rapid traverse X/Z: 6m/8m/min, feed rate: 5m/min, feed force: 5kN, tailstock quill stroke: 180mm, tailstock quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3200mm/1800mm/1900mm, weight: approx. 3100kg, operating hours: 79727h. Documentation available. On-site inspection is possible.

General Manufacturer: Citizen Type: Cincom R 07 VI Year of Make: 2012 Control: Citizen Cincom Number of axles: 6 Turning diameter: 7 mm Turning length: 40 mm Thread diameter: 4 m Spindle passage: 12 mm Spindle Speed: 0 – 16,000 rpm Spindle power: 1.1 kW Sub-spindle Speed: 0 – 10,000 rpm Pick-up length: 40 mm C-axis: 1° Tapping diameter: 3 m Tool Carrier Quantity: 2 Number of stations: 13 Turning tools: 5 Drilling tools: 4 Tool shank cross-section: 8 mm Counter-processing Number of tools: 4 Drive Connection 50 Hz 3x: 400 Volts Sub-spindle power: 0.5 kW Total power requirement: 4 kVA Dimensions and weight Dimensions: 1,465 mm x 560 mm x 1,410 mm Weight: approx. 950 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Pneumatic workpiece extraction LNS Tryton 112 Rother mini ...

Number of spindles: 6, max. bar capacity: 42mm, max. machining diameter: 42mm, speed: 5000rpm, machining slides: 4, number of slides front/rear: 4/2. Machine dimensions X/Y/Z: approx. 7200mm/1700mm/2300mm, weight: approx. 10000kg. The machine has an electrical problem as a result of which the control does not start up. Documentation available. On site inspection is possible.

Description Labor-E 275 Details Type 275 Year of manufacture 1997 Machine no. 9711848 FAGOR CNC 850T control Tip height above bed 275 mm Center width 3,000 mm Footprint 5,050 x 1,800 x 1,430 mm Circumferential diameter over bed 550 mm Circumferential diameter over carriage 340 mm Spindle nose 8" Spindle bore 103 mm Main spindle motor 11.5 kW Z-axis motor 1.4 kW X-axis motor 0.7 kW Quill feed 220 mm Quill diameter 100 mm incl. documentation SPECIAL PRICE

Offer 24204 Technical data: - Largest turning diameter over bed 420 mm - Center width 1000 mm - Spindle bore mm - Mounting cone of the tailstock quill MK 4 - Travel of the tailstock quill 200 mm - Spindle speeds 40 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V - with: - 3 jaw chucks - SWS steel holder with 3 inserts - Space requirement approx. W 2800 x H 1250 x D 950 mm - Weight approx. 2200 kg

Offered is a CNC lathe (sub-spindle, milling/C-axis, Y-axis). Equipped with bar feeder for balls 120mm, incl. Fanuc six-axis robot M-16iB with R-30iA control for automated loading and unloading as well as a bunker for raw material supply. Machine is operational. Inspection possible by prior arrangement.

Offered is a lead and feed screw lathe. Swing diameter over bed 710mm, over carriage 480mm. Distance between centers 1000mm. Spindle bore 71mm. Speeds 18-800rpm (12 steps). Motor power 7.5kW. Machine weight approx. 3070kg. Equipped with Heidenhain digital readout, chip protection wall, splash guard, coolant system, and four-position tool post. Repaired and inspected prior to storage. Inspection possible by prior arrangement.

Key data: 480 mm, 2000 mm, 3050 1/min

Stock number: 4009 CNC LATHE Manufacturer: Gildemeister , Type: CTX 600 Machines NO.: 361238, Year of manufacture: 1997 Specifications: Max. circumferential diameter 480 mm dia. Max. turn. About Bed 650 mm Dia. Turning length 2000 mm Main motor power 27 kw Main spindle speed range 4-3050 rpm Tool turret with 12 stations Powered stations revolver 1 6 pieces. Control Gildemaister EPL Fabr. Accessories: Hydr. Chuck main spindle 400 mm dia Tool holder vdi 50 Driving angle tools 2 pieces Driving Tools Straight 2 pcs. Various tool holders. 15 Chip conveyance. Cooling water system. Length: 4000 mm, Height: 2100 mm, Width: 2500 mm, Weight: 9100 kg

For sale Emco CNC double spindle lathe type Hyperturn 45. A very complete CNC lathe with left and right spindle, as well as an upper and lower turret. Both turrets have driven tool positions! The upper turret also has a Y-axis with 70 mm travel. Tool holder attachment VDI25, rod capacity left spindle is Ø 45 mm, maximum speed 7,000 rpm. Maximum diameter is Ø 300 mm. Maximum part diameter is 480 mm. The distance between the two spindles is 720 mm. Fanuc 18i-TB control. The machine is equipped with high pressure pump, chip conveyor with right ejection, parts catcher, manual collet devices, etc. Available from stock, subject to prior sale. The machine has a light layer of soot. This can be easily removed.

turning diameter: 400 mmturning length: 1100 mmcontrol: Siemens Sinumerik 840D SL greates pass round over bed: 500 mmSwing dia. over traverse guideway: 370 mmMain spindle:: Max. rpm: 5000 min/-1power capacity - main spindel: 17 / 25.5 kWmax. Torque: 345 Nmspindle diameter in front bearing: 130 mmspindle bore: 67 mmchucking diameter: 325 mmspindle nose: A8 axis stroke:: x-axis: 750 mmy-axis: +/- 100 mmz-axis: 1200 mmfeeds:: rapid traverse: 40 / 40 / 40 m/minTailstock:: tailstock: 1200 mmtaper of center: Mk 5 tension force: max. 8 kNmilling head: b-axis: +/- 120 °tool taper: HSK A 63 tool piece magazine with: 60 spindle turning speed - stepless: 12000 U/minspindle motor: 10,5 kWmax. torque on the spindle: 90 Nmtotal power requirement: - kVAweight of the machine ca.: 9 tdimensions of the machine ca.: 4,6 x 2,5 x 2,82 mEquipped with:- Siemens 840D SlimLine / Celos CNC control- 3-jaw ch ...

faceplate diameter: 1250 mmswing diameter: 1400 mmturning height: 1400 mmcontrol: Siemens 840D travel -x axis: -80 / +1100 mmtravel -z axis: 1060 mmworkpiece height max.: 1400 mmmax. workpiece weight: 8000 kgShank diameter: 200 x 240 mmtable turning speeds: 2- 400 U/mindrive capacity - spindle motor: 44 kWmax. torque on the faceplate: 14510 Nmrapid traverse: 12 m/minturning speed range - milling: 0,01 - 7,4 U/minspeeds of tool: 4 - 3000 U/minwork piece power: 22 kWTorque: 840 Nmtotal power requirement: 90 kVAweight of the machine ca.: tdimensions of the machine ca.: mequipped with:- CNC control Siemens 840Dsl- C-axis- driven tools- tool changer 12-fold (driven tools)- complete enclosure- chip conveyor- coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel -x axis: 900 mmtravel -y axis: 200 mmtravel -z axis: 800 mmB-axis swival range +/-: +90 / -20 °positioning accuracy: C: 9 control: SIEMENS number of spindle speeds: 0 - 6.000 CNC turning and milling center vertical | PITTLER - PV 315The machine is in very good condition.Technical data of the machine will follow soon.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: PV315 | PV-315The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working diameter: 140 mmturning diameter: 185 mmworkpiece length: 120 mmcontrol: Siemens turning speeds: 7.000 U/minVertical Turning Machine | FAMAR - BISUB 160 2GThe machine is in very good condition.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: BISUB1602G | BISUB160 2G | BISUB-160 2GThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chuck diameter: 500 mmswing diameter over bed slide: 700 mmcontrol: Siemens travel -x axis: 630 mmtravel -z axis: 500 mmCNC turning and milling center vertical | EMAG - VMC 450 MTThe machine is in very good condition.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: VMC450MT | VMC 450MT | VMC-450 | VMC-450MTThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 316 mm, 340 mm

CNC LATHE FOR GENERAL PURPOSE TURNING

L+Z Lathe WEILER Praktikant 160 – Partially Overhauled Machine in very good used condition – delivery on order, delivery time by arrangement! ✅ Technical data Year of construction: approx. 1990 Digital Display: 3-Axis (NEW) Max. turning diameter over bed: approx. Ø 320 mm Max. turning diameter via support: approx. Ø 198 mm Max. turning length: approx. 650 mm Bar passage: approx. Ø 40 mm Spindle speed: 96 – 2500 rpm Spindle nose: A 2 - 5 Drive power: approx. 2.2 kW Threading: Metric, Inch, DP, Module Tailstock: MK 3 Dimensions (LxWxH): approx. 1700 x 1000 x 1700 mm Weight: approx. 650 kg ✅ Accessories 3-jaw chuck 160 mm (NEW) Quick-change steel holder + 1 insert Electric Lining Guard (NEW) Work light (NEW) Complete machine documentation Emergency stop Various tension wrenches Coolant Setup L+Z Spindle  ...

faceplate diameter: 2950 mmswing diameter: 3200 mmturning height: 3500 mmtable load: 20 tfeed range: 3000 mm/minmain drive motor: 70 kWmilling drive: 16,1 kWControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m CNC-control FAGOR 8070 C-axis with 360,000 positions Milling headInspection under power in the factory possible.Machine location is Spain.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A lathe (Universal Turning Solution) is offered, control: Fanuc, tool turret: 12-station, tailstock, 3-jaw chuck. Tool setting arm: Renishaw HPRA. Inspection is possible by arrangement.

greates pass round over bed: 540 mmswing diameter over face slide: 370 mmcentre distance: 3000 mmcentre height: 270 mmturning dia. in gap: 815 mmbed width: 344 mmspindle bore: 88 mmspindle diameter in front bearing: 133 mmspindle taper: 11 D1 Camlock turning speed range: 18-1400 U/minturning speeds: 16 3-jaw chuck: Röhm Ø 315 longitudinal feeds:: 0,06-1,0 mmface feeds: 0,03-0,5 mmmetric threading: 0,4-14 mminch threading: 2-72 G/1thread - module: 0,3-3,5 mmthread - DP: 8-60 Pitchtailstock quill diameter: 75 mmquill stroke: 230 mmtaper of tail spindle: MK 5 slide valve travel: 280 mmupper head travel: 150 mmOverall size: ca. 4700 x 1100 x 1400 mmweight: ca. 3200 kgpower capacity: 9,4 kWAccessories:3-axis digital display FagorRöhm wedge bar chuck Ø 315 mmMultifix steel holder size Cincl. 6 interchangeable cassettesRotating center pointTurning chuck guardRear chip guardCoolant deviceWor ...

With C axis Swing over bed Ø 610 mm Swing over slide Ø 360 mm Distance between centers on tailstock version 682 mm Maximum turning diameter Ø 500 mm Maximum part length 520 mm Maximum bar diameter Ø 65 Travel in X / Z 260 / 610 mm Spindle speed 5000 rpm Number of tool on turret 12 Tool holder type VDI30 Controller FANUC Oi TF

SEDIN 1512 vertical lathe YOM 1987 Table diameter 1120 mm Max. turning diameter 1250 mm Max. workpiece height 1000 mm Max. workpiece weight: - 3200 mm (5…80 rpm) - 1000 mm (250 rpm) Main motor power 30 kW Installed power 37 kW Dimensions L/W/H 2750/2975/4100 mm Weight 16000 kg

Key data: 340 mm, 2000 mm

Emco Emcomat E-300 2-Axis Teach-In/Cycle-Controlled CNC Lathe CNC control Fagor 8055 i Power TC Turning diameter 340/570 mm Turning length 2000 mm Center height 275 mm Spindle diameter 108 mm Spindle nose D 1-8 Spindle speed 0-2,500 rpm X-axis travel 310 mm Travel Z-axis 2000 mm If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Description Heyligenstaedt Lathe NDb-630 Details Year of manufacture 1980 Tip height above bed 630 mm Turning length 3,000 mm Turning diameter over bed 1,240 mm Turning diameter over bed slide 960 mm Max. workpiece weight without support 10,000 kg Bed width over guideways 850 mm Number of guideways 2 Bed height 650 mm Slide path 3,000 mm Face plate diameter 1,100 mm Main spindle diameter in the front bearing 280 mm Max. torque at the face plate 25,000 Nm max. workpiece weight clamped on the fly at center of gravity distance 250 mm in front of face plate 4,000 kg Main spindle speed range 2.24 - 450 rpm. Number of main spindle speeds 4 mech. Levels Power main motor 50 kW Main motor speed 100-1,000-2,500 rpm. Number of supports: 1 Cutting force support 4,000 kg Guide length front bed ...

Description Seiger lathe SLZ 800E x 4000 Details Machine no. 4443 Year of construction 2008 Siemens Cycle Control Spindle holder according to DIN 55027 size 11 Spindle bore Ø 130 mm Spindle diameter in the front bearing 170 mm Spindle taper 1:20 Drive power 20/28 kW Main spindle speed switching stage "I" 9-1,800 min-1 Main spindle speed switching stage "II" 9-400 min-1 Maximum torque: 3,200 Nm Center width 4,000 mm Circulation Ø above the bed 810 mm Circulation Ø above the face slide 540 mm Bed width 480 mm Machine dimensions 2,000+center width x 2,750 x 2,000 mm Permissible workpiece masses between points without setting stick 2,000 kg Permissible workpiece masses between points with a setting stick 2,200 kg Permissible workpiece masses between tips with two setting sticks 2,500 kg  ...

turning diameter: 270 mmturning length: 630 mmcontrol: SIN840D swing over bed: 400 mmswing diameter over slide rest: 220 mmlongitudinal slide -travel: 745 mmcross slide - travel: 200 mmturning speeds: 10 - 4.000 U/minpower capacity at 100 % load: 15,00 kWspindle head DIN 55026 - Size: 6 spindle bore: 62 mmchucking diameter: max. 315 mmfeed x-axis: 1 - 12.000 mm/minrapid traverse X-axis: 12,00 m/minFeed z- axis: 1 - 20.000 mm / min.rapid traverse Z-axis: 20,00 m/mintailstock quill taper MT: 3 quill stroke: 112 mmquill pressure: 10,00 kNtool turret with 12 work positions: tool taper DIN 69880: Ø 30 mmTool drive speed max.: 4.000 1/mintotal power requirement: 37,00 kWweight of the machine ca.: 4,00 tdimensions of the machine ca.: 4,00 x 2,75 x 2,30 mWith SIEMENS SINUMERIK 840D control system, turret with driven tools, C-Axis, tailstock, chip conveyor, various tool holders.The data for thi ...

swing diameter: 560 mmturning length: 800 mmcontrol: C200-4D Siemens 840 DMain spindle:: spindle head: 8 DIN 55026/55021 ISO 7027/1bar capacity: 90 mmspindle diameter in front bearing: 140 mmturning speed range - spindle: ~ 3.500 U/mindrive capacity - spindle motor: 100% / 40%: 43 / 57 kWTorque: 275 / 363 NmIndexing: 2,5 °C-Axis: 0,001 °turret:: Number of Turrets: 1 number of toolpositions: 12 pos.Spindle speed - driven tool stations: ~ 6.000 min -1power capacity - driven tool-stations: 11 kWtool taper: 40 x 63 mm DIN 69880Torque: 21,5 Nmtravel -x axis: 300 mmtravel -z axis: 800 mmrapid traverse: X/Z: 30 / 22,5 m/minfeed power: X: 7.200 Nfeed power: Z: 9.000 NTailstock:: dia. of quill: 65 mmCone: SK 30 longitudinal travel: 800 mmrapid traverse: 10 m/mintotal power requirement: 51 kVAweight of the machine ca.: ca. 14 tdimensions of the machine ca.: 7,3 x 4,0 x 2,6 mChip conveyor: Co ...

turning length: 4.500 mmgreates pass round over bed: 810 - 760 mmswing diameter over slide rest: 740 mmcontrol: SIEMENS - 840 C max. turning diameter: 800 mmturning diameter over slide: 740 mmtravel -x2 axis: 875 mmtravel -z2 axis: 5.200 mmCNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500equipped with a turret for driven tools as well as NC steady rest and tailstock.Additional equipment:- Centering points,- Jaw sets,- Clamping jaws,The machine is in a well-maintained condition andcan be inspected at any time under power.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: N-40 | N 40 | N40MCT4500 | N40MCTThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heid S-200 CNC Lathe Manufacturer: Heid Type: S 200 Machine Type: CNC Lathe Tailstock travel: 175 mm Tailstock quill holder: Morse cone: 4 MK Quill stroke: 140 mm Quill diameter: 95 mm Pressure capacity: 17 kN Connection 50 Hz 3x: 380 Volts Total power requirement: 65 kVA Spindle speeds: Infinitely variable from 0 rpm to: 4000 rpm Spindle bore: 77 mm Tool shank cross-section: 25x25 mm Turning diameter above the bed: 420 mm Turning diameter maximum: 250 mm Turret slide: Longitudinal travel (Z-axis): 1150 mm Flat travel (X-axis): 230 mm More items - new and used - can be found in our shop! International shipping costs on request!

General Manufacturer: Stama Type: MT 733 two Year of Make: 2020 Control: Siemens Sinumerik 840D SL Travel: X 615 mm Y 290 mm Z 500 mm Rapid traverse: 65 m/min Feed: x 4,000 N / Y 4,000 N / Z 8,000 N Main spindle unit Speed: 12,500 rpm Tool holder: HSK-T63 Pull-in force: 18 kN Spindle bearing diameter: 80 mm Tool magazine Number of available magazine slots: 64 Tool diameter max. when fully equipped: 78 mm Tool diameter max. with free secondary positions: 140 mm Tool length: max. 300 mm Tool holder: HSK-A/T63 Tool weight: max. 10 kg Total chain load: max. 115 kg Rotary swivel unit Swivel angle: +30 to -180° Swivel axis repeatability: ±1" Swivel axis speed: max. 61 1/min Clamping torque tangential swivel axis: 3,000 Nm Clamping torque tangential counter bearing: 1,800 Nm Condition Condition: Used Functional: tested and fully functional

Digital Center height 150 mm Circulation over bed 300 mm Center width 1000 mm 3-jaw chuck, Arbor Chip protection Chip tray