lathes used for sale (3,053)

SEDIN 1516 CNC Vertical Turret Lathe CNC control- Eastern origin Turning diameter: 1600 mm Table diameter: 1400 mm Max workpiece height: 1000 mm Max table loading: 5000 kg Max horizontal ram travel: 630 mm Max horizontal carriage travel: 975 mm Max vertical ram travel: 700 mm Max vertical carriage travel: 1000 mm No of feed carriages: 16 Carriages feed range: 0,07-12,5 mm/rev Distance between table and ram: 0-1225mm Fast stroke: 2000 mm/min Main motor power: 30 kW Speeds range: 4 - 200 rpm Dimensions: 3190x3360x4100 mm Weight: 18200 kg

SEDIN 1516 Vertical Turret Lathe Turning diameter: 1600 mm Table diameter: 1400 mm Max workpiece height: 1000 mm Max table loading: 5000 kg Max horizontal ram travel: 630 mm Max horizontal carriage travel: 975 mm Max vertical ram travel: 700 mm Max vertical carriage travel: 1000 mm No of feed carriages: 16 Carriages feed range: 0,07-12,5 mm/rev Distance between table and ram: 0-1225mm Fast stroke: 2000 mm/min Main motor power: 30 kW Speeds range: 4 - 200 rpm Dimensions: 3190x3360x4100 mm Weight: 19200 kg Side support

Siemens 840D Control - Iemca Boss 545E-r/32 barfeed - Nanocool CIL750 A-CT oil cooler - machine has worked with oil

turning diameter over bed: 800 mmturning diameter over slide rest: 860 mmturning length: 6000 mmturning diameter: 800 mmswing diameter over bed slide: 800 mmswing diameter over cross slide guide: 520 mmspindle bore: 71 mmspeeds: 11,2 - 1800 U/minvolt: 400 Vchuck: 315 mmchuck: 630 mmtotal power requirement: 15 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center height: 280mm, center width: 2000mm, turning length: 2000mm, turning diameter over bed/face slide: 570mm/340mm, spindle bore: 63mm, speed: 2500rpm, quill stroke: 160mm, quill diameter: 70mm, power requirement: 15kW. Machine dimensions X/Y/Z: approx. 3850mm/1850mm/1750mm, weight: approx. 3500kg. On-site inspection is possible.

Workbench parallel Lathe WABECO 10200 Between points: 500 mm Maxi Ø on bench: Ø 200 mm Maxi Ø over saddle: Ø 120 mm Spindle diameter: Ø 26 mm Spindle speed: from 10 to 1000 RPM (on electronic dimmer) Square/ tilting turret 3-jaws chuck Ø 100 mm Year of construction: 2001 Tailstock CM2 Longitudinal auto feeds Supplied with the gears (see photo) Supplied without the table Voltage: 220 V mono Dimensions (L x W x H): 1200 x 300 x 450 mm Weight: approx 100 kg

CNC controller: Mitsubishi M-720BM (MAPPS 2) Capacity X-axis travel mm: 260 Z-axis travel mm: 520 C-axis: 360º (0.001°) Turning length mm: 515 Max. turning diameter mm: ø: Ø356 Upper turret Tool holder: 12 Main spindle Speed spindle rpm: 5000 Drive power spindle kW: 15/11 Spindle bore mm: 73 Manufacturer: KITAGAWA Counter spindle Counter spindle travel mm: 525 Equipment Chip conveyor Signal lamp Tool measuring arm Workarea light Working time hours Under power: 7.456 Cutting Time: 5.423 Basic machine dimensions / weight Length mm: 3.495 Width mm: 2.050 Height mm: 2.230 Weight kg: 5.800

ED 300ECO Metal Lathe Motor 400W (S1) 230V 50Hz Dimensions in mm 760x230x254 Center width/height 300mm / 90mm Rotary spindle speed 50-2500 rpm Spindle bore 20mm Spindle mount MK3 Tailstock Cone MK2 Travel longitudinal slide 275mm Traverse travel cross slide and top slide 70mm Quill path 5mm Thread Metric in mm/r 0.5-2.5 max. tool holder 8mm Weight 48kg G&HM ED300Eco_2

Key data: 800 mm, 4000 mm

Description Seiger SLZ 800E cycle lathe incl. milling unit Details Machine no. 4443 Year of construction 2008 Control Siemens Sinumerik Turning diameter 800 mm Turning length 4,000 mm Face plate 800 mm, 4 jaws Face plate 500 mm, 4 jaws 3-jaw chuck 400 mm Lynette up to 450 mm (2 different) Accessories various jaw sets powered tool Permissible workpiece dimensions: between tips without setting stick 2,000 kg with a setting stick 2,200 kg with two sets 2,500 kg flying in the face plate 750 kg Machine dimensions incl. cladding 2,000 mm + Tip Wide x 2,750 mm x 2,000 mm incl. documentation

The machine is in good technical condition, inspection and trial operation is possible by prior arrangement

The machine is in good technical condition, an inspection by prior arrangement is possible. Max. turning diameter: 465 mm Max. circumferential diameter: 680 mm Max. rotation diameter via cross slide: 465 mm Max. width of the cross-section: 315 mm Travel in X/Z: 300/1050 mm 315mm 3-Jaw Hydraulic Chuck Max. spindle speed: 3250 rpm Spindle bore: 76 mm Spindle drive power (40%/100% ED): 33/22 kW Max. spindle torque (40%/100% ED): 630/420 Nm Max. speed driven tools: 4000 rpm Programmable tailstock, tool measurement, chip conveyor S/No. 8045000336E (2011) Installed power: 50 kVA Power supply: 400 V; 50/60 Hz Dimensions (L x W x H): 5250 x 2300 x 2000 mm Machine weight: 8000 kg

Control Siemens 840D Turning diameter 254 mm Turning length 500 mm Chuck diameter 210 mm Turning length 410 mm Speed 4,500 min-1 8-speed revolver Conveyor

The machine is in good technical condition, a test run is possible by prior arrangement. (spindle 32 mm) + Mitsubishi E60 control. Bar feeder included – for bars up to 3000 mm! Max. turning diameter: 60 mm Max. turning length: 120 mm Circulation diameter over cross slide: 120 mm X-axis: 170 mm Z-axis: 170 mm Spindle bore: 34 mm Max. bar diameter when using the loader: 32 mm Spindle holder: diameter 85 mm Spindle motor: 3.7 kW Spindle speed: 100–5,000 rpm Rapid traverse (X and Z axis): 15 m/min Min. program input: 0.001 mm Max. tool diameter: 16 mm Machine dimensions (L x W x H): 1200 x 1000 x 1500 mm

The machine is in good technical condition, a test run is possible by prior arrangement. Accessories included.

The machine is in good technical condition, a test run is possible by prior arrangement. Hours: 8,981 Upper driven tool turrets with Y-axis, lower driven turret, double slide with two spindles. Control: FANUC 31i-B. Max. circumferential diameter above the bed: 300 mm Max. circumferential diameter over the support: 230 mm Max. turning diameter above the bed with upper turret: 230 mm Max. turning diameter above the bed with lower turret: 230 mm Max. turning length: 600 mm Max. distance between the ends of the right and left spindle: 980 mm Milling area outside the axis of rotation due to Y-axis: 100 mm (+/- 50 mm) Max. rod diameter (left spindle): 65 mm Max. rod diameter (right spindle): 65 mm Max. permissible workpiece weight without sub-spindle (incl. chuck weight = 23 kg): 12 kg Total weight: 7,800 kg Accessories: SS 2500 bar feeder, length 200–1 ...

"The machine is in good technical condition, a test run is possible by prior arrangement."

- spindle drum locking by means of a triad of HIRTH-type rings, - central lubrication system, - 8 indipendent frontal slides, - 4 compound slides in pos. 1, 2, 5, 6, - 4 radial slides in pos. 3, 4, 7, 8, - double slide in pos. 8, - 2x pick-up spindle (pos. 4 + 8), - 2x pick-up spindle stop attachment (pos. 4 + 8), - chip conveyor, hinged belt type, - high pressure coolant system, - removable coolant fluid tank, - bar stock reel for bar length 3 m, - various camms, - various gears, - electrical preparation for auto bar loader, Number of spindles: 8, Max bar diameter [mm]: 32, Spindle speed [rpm]: 270 - 3.750, Spindles interaxis [mm]: 360, Max bar feed [mm]: 125, Weight of the machine ca. [kg]: 11.500

Country of origin: Germany, L max mm: 3.2, Operating hours: 0

turning diameter: 400 mmswing diameter: 420 mmx-travel: 850 mmz-travel: 315 mmspindle head DIN 55026 - Size: 11 spindle bearing diameter: 140 mmturning speeds: max. 4000 U/mintool turret 12 times: C5 Captorapid traverse x + z axis: 45 / 30 m/minfeeding force: 11 kNtotal power requirement: 58 kWweight of the machine ca.: 9 tdimensions of the machine ca.: 9,5 x 4,5 x 3 mHard turningDry machiningChip conveyorPromot Portal and CellmasterNo clamping device availableNo tools availableno Cellmaster accessories availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center width: 1000mm, turning diameter over bed/crank/trolley: 360mm/510mm/205mm, spindle bore: 42mm, speed: 2100rpm, machine dimensions X/Y/Z: approx. 1950mm/900mm/1350mm, weight: approx. 750kg. On-site inspection is possible.

equipped with Iemca Boss 338HD/32 barfeed new in 2017 - fixed and rotating bushing - evacuation of long pieces through the sub spindle + external apparatus - chip conveyor - some colllets+guide bushings - Fanuc 32i-B Control.

turning diameter over bed: 350 mmturning diameter over slide rest: 310 mmturning length: 700 mmtotal power requirement: 4,6 kWweight of the machine ca.: 1,0 tDimensions (HxWxD): 2.200 x 1.300 x 1.175 mm--> Technical data Centre height: 175 mm--> Centre width: 800 mm--> Swing diameter over bed: 350 mm--> Swing diameter over support: 310 mm--> Gap length in front of the faceplate: 145 mm--> Cross slide travel: 205 mm--> Top slide travel: 100 mm--> Tool cross-section: 20x20 mm--> Bed Width: 220 mm--> Height: 300 mm--> Headstock Spindle bore: 46 mm--> Spindle nose: DIN 55027-5--> Spindle inner taper: 1:20--> Tool holder: MK-3--> Spindle speeds: 18--> Speed range: 25 - 2000 rpm--> Tailstock Quill diameter: 50 mm--> Quill inner taper: MK-3--> Quill travel: 140 mm--> Lateral adjustment: 10 mm--> Feed range Number of feeds: 256--> Longitudinal feeds (128): 0.042 - 0.929 mm Rev--> Cross feed ...

turning diameter over bed: 330 mmturning diameter over slide rest: 190 mmcentre distance: 650 mmturning length: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3-jaw chucktool holder devicetail stock Technische Daten / technical details:Spitzenweite / center to center 650 mmDreh-Ø über Bett / turning diameter over bed 330 mmDreh-Ø über Schlitten / turning diameter over sledge 190 mmSpindelbohrung / spindle hole 36 mmDrehzahlbereich / spindle speed 30-2500 UpM /rpmAntriebsleistung / drive capacity 2,2 kWGewicht der Maschine ca. / weight ca. 600 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A DMT lathe is available. Center distance: 1000mm, swing diameter over bed/face slide: 420mm/210mm, bed height: 340mm, spindle bore: 64mm, spindle diameter: 115mm, speed: 4000rpm, quill diameter: 60mm, quill stroke: 140mm, face slide width: 210mm, face slide length: 640mm. Machine dimensions X/Y/Z: approx. 2150mm/1150mm/1700mm, weight: approx. 1800kg, control: Heidenhain, operating hours: approx. 300h. Documentation available. On-site inspection is possible.

An Emag vertical CNC lathe is available. Clamping chuck diameter: 250mm, max. circulation diameter: 270mm, max. machining diameter: 250mm, max. machining length: 175mm, speed: 4500rpm, tool positions: 12, tool holder: VDI 40, travel X/Z: 660mm/300mm, rapid traverse X/Z: 60m/30m/min. Machine dimensions X/Y/Z: approx. 4300mm/1600mm/3300mm, weight: approx. 7500kg, control: Fanuc Series 32i-Model A, operating hours: 64137h. Including automatic loading and unloading with pick-up spindle and integrated part diverter and workpiece storage. Documentation available. On-site inspection is possible.

GILDEMEISTER MF twin 65 CNC lathe was built in 2000 in Germany by GILDEMEISTER Drehmaschinen GmbH. This extremely efficient machine is used for precision machining of workpieces with a maximum diameter of 200 mm. The machining process is performed inside a large work space, by means of two spindles and tools taken from two 12-position turrets. This solution maximises production efficiency by enabling simultaneous workpiece machining on both spindles. What’s more, any vibration or oscillation is eliminated by a rigid bed, guaranteeing high process stability even during the most intense challenges. The MF twin 65 CNC turning center, including the control cabinet, weighs approximately 6500 kg. Technical specifications of the GILDEMEISTER MF twin 65 CNC dual-spindle lathe General data - number of axes: 4 (X1,X2,Z1,Z2) - swing over bed: 240 mm - maximum turning diameter: 200 mm - ma ...

faceplate diameter: 2650 mmturning diameter over slide rest: 2800 mmturning diameter over plate: 3200 mmturning length: 10000 mmupper slide-adjustment: 250 mmspindle diameter in front bearing: 400 mmspindle turning speed range: 0,35 -1,12 / 1,2 - 56 U/minfeed: 0,05 - 18 mm/Uworkpiece weight: 9000 kgspindle motor: 60 kWmax. workpiece weight between centres: 20000 kgControl: total power requirement: - kWweight of the machine ca.: 93 tdimensions of the machine ca.: m- CNC control NUM 1060- 4-jaw face plate- Steel holder device- Tailstock- Base plate- Roller setting vice- Transverse travel of the top slide: 425 mm- Longitudinal displacement of the main slide in the centre section: 150 mm- Transverse displacement of the centre section on the lower section: 700mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.