other metal working machines used for sale (10,922)

Boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, spindle tool, cutter, circle cutter -Manufacturer: Marchner, Grinding tool, boring head, circle cutter without cutting tool -Recording: SK40 -Diameter range: -Puncture depth: mm -Transport dimensions: 330/160/H110 mm -Weight: 5.4 kg

Quick-change tool holder, tool holder head, quick-change tool holder, quick-change boring bar holder, quick-change boring bar holder, quick-change turning tool holder -Quick-change tool holder: Quick-change turning tool holder -Type: B2D 25120 -Recording dimensions: see photos -Tool holder: H25 x 120 mm -Number: 13x steel holders available -Price: per piece -Dimensions: 120/50/H100 mm -Weight: 1.5 kg/pc.

Quick-change tool holder, tool holder head, quick-change tool holder, quick-change boring bar holder, quick-change boring bar holder, quick-change turning tool holder -Quick-change tool holder: Quick-change boring bar holder -Type: Multifix compatible -Recording dimensions: see photos -Tool holder: Ø 40 mm -Number: 2x steel holders available -Price: per piece -Dimensions: 120/80/H120 mm -Weight: 2.7 kg/pc.

rollforming line for simple angle profile Equipment consists of: 1 gt; decoiler 2 gt; roll forming line with 6 stands 3 gt; cutting unit

Mobile 3D Handheld Scanner ZEISS GOM T-SCAN hawk for optical 3D digitization and measurement of components with red and blue laser as well as integrated photogrammetry.Technical Specifications:Manufacturer: ZEISS / GOMModel: T-SCAN hawkScan Modes: Standard, Single Line, FineLaser Source: 7 red / 5 blue laser linesResolution: 0.010 – 0.050 mmLaser Class: 2MSoftware: GOM Inspect Suite / GOM Inspect ProfessionalData Transfer: USB 3.0Accessories:DELL LaptopUSB stick with "T-SCAN" software licensesExternal hard drive with GOM system backupUSB adapterZEISS cleaning fluid12 cans of ATTBLIME AB6 sublimating 3D scanning spray for surface preparation.Tool case with optical measurement accessories and reference markersMobile transport cart with clamping plates, setup supports, and mounting railsGOM CP40 calibration plateTransport and storage caseThe licenses must be coordinated with the ...

wire dia.: . mmwire length: . mmpulling capacity: 7 ttotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: Manufacturer: Roland Type: LEF2-200 Printing method: Piezo inkjet process Print width/print length: max. 508 x 330 mm Print resolution: max. 1,440 dpi Attachable objects for printing Width: max. 538 mm Length: max. 360 mm Thickness: max. 100 mm Weight: max. 5 kg Ink Type: ECO-UV (EUV, EUV4), 220 ml cartridge Colors: cyan, magenta, yellow, black and white Dimensions and weight External dimensions L/W/H: 1,202 mm, 962 mm, 549 mm Weight: 110 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: UV lamp for curing the printing ink (built-in UV LED lamp) Automatic sleep function Included parts: Power cord, RIP software, cleaning fluid, drip tab, user documentation

Qty. 1 Second-hand Vertical Aluminium Profile Powder Coating Line Mfc.: TRASMETAL, GEMA & SIEMENS Built: 1992 The pistol range converted by TREVISAN in 1996 Full refurbished of the pretreatment section by TREVISAN in 2017 The system described here is used for vertical powder coating of aluminum profiles Parts to be treated: Aluminum profiles with 6.5 m Production performance: about 400 profiles/hour Hanging distance: 150 mm Speed considered: 1 m/min for normal profiles The system design has been taken into consideration average values. Weight 5 Kg/profile (7m). The maximum profile section to be treated is 240x120 mm. The oven is still in almost its original condition, while all other components, such as the transport system, the transport chains, the painting booth and the coating technologies, as well as the pre-treatment and final treatment line, have been constantly optimi ...

EDM machine Sodick AP 500L BJ 2008

EDM machine Sodick AP 200 L BJ 2007 (defective)

2 x EDM machines Charmilles Robofil 6020 built in 1997 and 1999

Wire EDM Machine Agie Charmilles Cut 2000 BJ 2011

Offered: Mechanical tapping machine with change-gear feed. Equipped with T-slot worktable, tool holder, mechanical operating levers, foot switch and emergency stop button. Inspection possible by appointment.

A spray station with exhaust air connection is offered. Equipped with side shields, upper extraction hood, integrated lighting, rear separation panel, floor tray and central workpiece support. Spray gun, hoses and side-mounted material container. Inspection possible by arrangement.

A spray station with exhaust air connection is offered. Equipped with side shields, upper extraction hood, integrated lighting, rear separation panel, floor tray and central workpiece support. Spray gun, hoses and side-mounted material container. Inspection possible by arrangement.

A reflow soldering oven with nitrogen operation is offered. Power: 70kW. Nitrogen consumption: approx. 21m³/h. Cooling: 20l/min at min. 2bar. Exhaust air: 400m³/h. Inspection possible by arrangement.

Auction-ID: A1-50997-148

Cutting cap. 2200 x 4, mm,controlled gap Auction-ID: A1-51499-26

clamping plate: 595 x 445 mmdrawing length: 400 mmstroke: 400 mmserial number: 890402 weight of the machine ca.: 1.600 tdimensions of the machine ca.: 1.400 x 1.200 x 1.500 mmMinimum/maximum cutting speed: 0 - 20 m/minMinimum/maximum return speed: 40 m/minMaximum workpiece diameter according to DIN6885 (bore): 230 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 900 mmtotal power requirement: kWweight of the machine ca.: 0,2 tdimensions of the machine ca.: 2,0x 1,0 x 0,9 mSiegmund Welding Table with Steel Plate- Frame made of aluminum profiles- Working height: 900 mm- Perforated plate: high-quality S355J2+N steel, plasma-nitrided and BAR-coated- Borehole diameter: 16 mm- Borehole grid: 50x50 mm- For clamping: manual clamping bolt 160514The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Quick-change tool holder, tool holder head, quick-change tool holder, quick-change boring bar holder, quick-change boring bar holder, quick-change turning tool holder -Quick-change tool holder: Quick-change boring bar holder -Type: Multifix BD 25140 -Recording dimensions: see photos -Number: 2x steel holders available -Price: per piece -Dimensions: 140/50/H115 mm -Weight: 1.8 kg/pc.

Micrometer screw gauge, micrometer screw gauge, external micrometer -Manufacturer: Lenze, micrometer -Measuring range: 200-300 mm -Reading: 0.01 mm -Locking device -other sizes: also available -Case dimensions: 485/275/H35 mm -Weight: 3.2 kg

Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Forkardt, wedge bar chuck -Mouth size: Ø 200 mm -Bolt circle: Ø 160 mm -Through hole: 52 mm -Overall dimensions: Ø 200 x 130 mm -Weight: 18.7 kg

Quick-change tool holder, tool holder head, quick-change tool holder, quick-change boring bar holder, quick-change boring bar holder, quick-change turning tool holder, double tool holder, 2-way turning tool holder, double tool holder, 2-way quick-change tool holder, 4-way turning tool holder, quad tool holder, 4-way quick-change tool holder -Quick-change tool holder: 4-way quick-change boring bar holder -Hole: Ø 10 mm -Clamping height: 20 mm -Clamping length: 80 mm -Number: 2x steel holders available -Price: per piece -Dimensions: 80/80/H55 mm -Weight: 1.6 kg/pc.

Quick-change tool holder, tool holder head, quick-change tool holder, quick-change boring bar holder, quick-change boring bar holder, quick-change turning tool holder -Quick-change tool holder: Quick-change boring bar holder -Type: unfortunately without a type designation -Recording dimensions: see photos -Tool holder: Ø 32 mm -Quantity: 1x steel holder available -Dimensions: 120/75/H115 mm -Weight: 2.4 kg/pc.

Quick-change chuck, quick-change holder, quick-change head, quick-release drill chuck, milling chuck, quick-change insert, collet chuck, reducing sleeves, snap-on holders, quick-change conical sleeve, reducing sleeve for tool holder systems, cylindrical Morse taper sleeve -Manufacturer: Multifix, Quick-change conical sleeve, cylindrical Morse cone sleeve, 2 pieces -Type: CL 450 MK 4 -Sleeve: Ø 50 mm -Morse cone: MK4 -Submission/Price: complete -Dimensions: Ø 54 x 150 mm -Weight: 1.4 kg/pc.