other metal working machines used for sale (11,172)

Unused Rated power: 9.2 kVA Rated current: 14 A Open circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

Compressed Air Plasma Cutting Machine Maximum cutting thickness: 1-40 mm Current: 20-120 Amps Voltage: 310V Single-tube, full-bridge inverter technology, with sufficient output current for high-intensity operations, precisely preset cutting current + adjustable gas delay.

FAG - Batch of bearings and cast iron bearing housings 441KG

with feed deviceNominal force: 1000 kNPneumatic pressure: 5 barPermissible delay time: 210 msSafety distance Tool operation: 336 mmContinuous stroke (interchangeable pulley): 50/80 rpmSingle stroke: 45 rpmWorking capacity in continuous stroke: 3500/5000 NmTorque: 25,000 NmDrive power: 11.5 kWwith control panel and digital display CPS 20with support frame

Order number: 121789APress force: 100 kNStroke rate: 55 and 82 per min. Ram stroke: 8 - 140 mmRam adjustment: 80 mmTable dimensions: 1000 x 720 mm with three grooves

Table surface 600 x 500 Swivel range 110 degrees Height 150mm good condition

MMA-120 Welding Machine 220V – Compact & Powerful MINI Small shell case True current: 20-120A Duty cycle: 30%

"Permanent magnetic clamping plate with longitudinal pole pitch. Designed for clamping ferromagnetic workpieces, e.g. for grinding or light milling work. Product: Permanent magnetic clamping plateManufacturer: SAVType: 243.01-300 × 150 FP1-100Dimensions (approx.): • Clamping surface: 300 × 150 mm • Height: approx. 52 mm"

Table lathe with base cabinet 2-axis LCD digital display system. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Drip tray Hardened bed sheets. Emergency stop. Feed protection Set of wheels. Suitable tools. Turning diameter over bed 250 mm Turning diameter over support 140 mm Turning length 550 mm Speed 50 - 2000 rpm Tip height 125 mm Spindle bore 26 mm Tailstock quill holder MK 2 MK Tailstock quill stroke 65 mm Connection voltage 230 V Total power requirement 1.1 kW Machine weight approx. 0.15 t Space requirement approx. 1.3 x 0.6 x 1.3 m Condition: never used / new (5)

Equipped with input power: 7.6 kVA; input voltage 1-phase 230 V AC 50 Hz; duty cycle 45%; protection class: IP21S; Max cutting thickness: 12mm steel; Unused in box

v.v. euroklemming

Machine is equipped with: - Chip conveyor - Oil skimmer - Through spindle coolant

Drilling and milling machine (demonstration machine) with - Cross support - Feed via hand crank - Chip protection - 16mm drill chuck - Mechanical MK tool clamping Drilling capacity in steel 16 mm Projection 180 mm Drilling stroke 85 mm Spindle Holder MK 2 Spindle diameter 47 mm Spindle speeds 320 - 3300 rpm Table adjustment transverse 230 mm Table adjustment longitudinal 100 mm Table clamping area 420 x 155 mm Connection voltage 230 V Total power requirement 0.75 kW Condition: never used / new (5)

Additional information Compressed Air Plasma Cutting Machine Brand: Hyper Welding Type: CUT-120 Condition: Unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 40 mm Connection: 380 volts Adjustable amperage: 20-120 amps Start: Ahead duty cycle: 60% duty cycle (120 A) Duty Cycle (%) 60 Efficiency (%) 85 Power factor 0.75 Insulation level H Protection class of the shell IP21S Recommend compressor pressure during cutting (B)

Party casters; number unknown; sitting in a large wooden crate which includes

Reading hours: approx. 67,741 h (machine) / approx. 21,617 h (spindle) Equipped with: 60-fold tool change magazine, (1x) chip conveyor (2017), (1x) cooling/filter unit with pumps and control cabinet, oil mist separator.

equipped with ground clamp, welding torch, pressure gauge and power cable

Includes 1 set of tools; equipped with steered X axis

Consisting of warehouse rack with contents large batch of various screws