other metal working machines used for sale (11,244)

degree: - length: - mmwidth: - mmheight: - mmcapacity: - kg/htotal power requirement: 30 kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Box Length: - Box Width: - Box Height: - total power requirement: 30 kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

total power requirement: 50 kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10 barNumber of working hours: 69.551 / 38.921 htotal power requirement: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Krollmann pointing and rolling machine for pointing wire, round, and bar material in preparation for drawing processes is available. Machine body swivel: 90°, shear: available. Wire diameter range: 0.5mm-8mm. An on-site inspection is possible.

A Heinrich Müller rotary swaging machine for wire and tube production is available. Tool system: hammer jaws, tool set: 4/set, tool angle: 2.5°, tool length: 100mm, tool width: 32mm, tool heights: 50.5mm/51.5mm/52mm, tool diameter range: 15mm-31mm, initial diameter: 7.5mm, final diameter: 3.2mm, total cross-sectional reduction: 81%, reduction range per forming stage: 12%-20%, cycle time: approx. 15s, max. taper angle: 10°/side. Documentation available. An on-site inspection is possible.

A Wafios wire straightening and cutting machine with a straightening attachment of 1000mm is available. Wire diameter range: 1.5mm-7mm, cutting length range: 20mm-3000mm, straightening rotor speed: 6800rpm, pitch: 71/69, cutting stroke: 270/min, machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 1400kg. An on-site inspection is possible.

LNS PB 80 / Bar Chamfering Machine / Sharpening Machine -CE marking - Chamfer diameter - 30 degrees 8-80mm - Chamfer diameter - 45 degrees 8-60mm -Turning diameter 10-60mm -Max turning length 40mm -2x speeds -Power 0.0-1.65 KW -Three-jaw chuck -Adjustable material support -Documentation Dimensions: LxWxH 1x0.7x1.6 meters / Weight 400 kg

Technical data: Manufacturer: Tesa Brown&Sharpe Type: Derby Etalon 454 Year of Make: 1998 Measuring range X/Y/Z: X 457 mm, Y 508 mm, Z 406 mm Transducer: Renishaw TP-ES Dimensions and weight Weight: approx. 250 kg Condition Condition: Used Functional: Tested and fully functional

Gear shaving machine ZSA 320

- technically efficient, ready to work – after full service - motor power: 2.2 kW - cutter diameter: 300 mm - milling angle: +45° / 90° / -45° - pneumatic profile clamping - cooling and lubrication system - compressed air preparation station

A Rohde chamber kiln is available. Volume: 600l, max. temperature: 1000°C, internal dimensions X/Y/Z: 710mm/870mm/920mm, power: 40kW, insulation layers: 2, heating directions: 4, heating element: grooved refractory brick. Machine dimensions X/Y/Z: approx. 1100mm/1500mm/2300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.

3 assen: Y1 / Y2 / X Handmatige bombeertafel De achterkant van de machine is gesloten.Capacity: 175 ton x 3600 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Locking speed: 80 mm/sec Working speed: 9 mm/sec Returning speed: 95 mm/sec Electric motor (power): 15 kW Length: 3880 mm Depth: 1750 mm Height: 2750 mm Weight: 13,4 ton

TOS chuck 200 mm

ORT RP12, 2-roll, 12 ton, Thread rolling machine, The machine is in our warehouse, under power

Manufacturer: Queser Model: MV 154 EL Year of Manufacture: 2012 Type of Machine : Machining Center - Low hours - Very good condition - Many tools Find more here - / Contact us at -

A smelting furnace from Stotek is being sold. Year of manufacture 2022. The plant has to be dismantled and loaded by yourself. The AME is part of the range of Støtek crucible furnaces for melting and holding aluminium. It is a static, high-efficiency, electric furnace for aluminum melting and holding. It is typically used as a baling oven. The separate control panel is designed for simple and easy operation. Thyristors, efficient PID regulation and high-quality heating elements ensure a minimum operating temperature with high energy efficiency and a long service life. The robust and intelligent design makes it possible to replace the heating elements with a minimum of interruptions, even when the crucible is hot and filled with metal.

Various smaller workshop metalworking machines from various manufacturers are available. 1) Brush machine RSA STL, year of manufacture: 1979. 2) Belt grinder Flott BSM 75. 3) Pull saw Graule ZS 85, year of manufacture: 1994. 4) Belt grinder Ludwig Gartner AZ2N. 5) Band saw Raim 360, year of manufacture: 1995. 6) Column drilling machine Quantum B 30 GS, year of manufacture: 2005. 7) Belt grinding machine HM TAS 75, year of manufacture: 2000. 8) Assembly band saw Berg & Schmid PBS 148. 9) Pull saw Graule ZS 200 N-S, year of manufacture: 2015. 10) Aluminum circular saw MEP Cobra 350 MA. 11) Notching saw Graule AS 450-D, year of manufacture: 2003. 12) Corner crimping press Rapid HP-205, year of manufacture: 1995. 13) Hydraulic press Schüco. 14) Notching saw Graule AS 450, year of manufacture: 2000. 15) Tie bar punching machine Schüco LA 10, year of manufacture: 2020. An on-site inspection  ...

Control: SINUMERIK 840 D rolling power: 800 kndiameter max.: Werkstück: 250 mmwork piece width: 80 mmspindle diameter: 110 mm: 100-700 1/minpower capacity: 110 kWlength: 2600 mmwidth: 2600 mmheight: 2600 mmweight: 12,5 tMandrel diameter: 45–100 mmScope of deliveryCentral lubrication, stepless speed control, proportional measuring system, linear mandrel guide, process monitoring for the mandrel, process data management, rolling equipment, distributor 130–190 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Durma Model: HRB-4 2010 Year of Manufacture: 2012 Type of Machine : 4-roll bending machine Machine Weight: 4,450 kg Condition: Unused - acquired May 2023, never operated, stored in warehouse Technical Specifications: - Bending Length: 2,050 mm - Max. Bending Thickness (mild steel): 8 mm - Max. Bending Capacity: 10 mm - Top Roller Diameter: 210 mm - Lower Roller Diameter: 190 mm - Side Roller Diameter: 180 mm - Min. Rolling Diameter: 30 mm - Motor Power: 11 kW - Oil Tank Capacity: 160 litres - Machine Dimensions (L x W x H): 3,830 x 1,160 x 1,180 mm Find more here - / Contact us at -

Technical data: Manufacturer: ogp Type: Smartscope CNC 250 Year of Make: 2004 Travel distances X/Y/Z: X 250 mm, Y 150 mm, Z 200 mm Scale resolution: 0.5 μm Condition Condition: Used Functional: Tested and fully functional

BJ Band Saw Kasto SBL 280 U 1998 Conventional lathe E3N01 Lathe Hurco TM8i Surface Grinding Machine FSG-1640AD Wagner 1997 Silent E Forklift R20-15 3-axis milling machine Hurco VMX24 3-axis milling machine Hurco VMX24 3-axis milling machine Hurco VMX30t 3-axis milling machine Hurco VMX64 Wire EDM Machine Mitsubishi FA20 Zeiss Contura G2 CNC Coordinate Measuring Machine 2007

RED MOUNTAIN - Polishing Bench -Stepless speed regulation 200 - 1100 rpm -Automatic brake -Chuck diameter 200mm with interchangeable jaws -Tip height 300mm -Drive power 0.75KW -Connection cable Dimensions: LxWxH 0.6x0.5x0.4 meters / Weight: 95Kg

Vertical Machining Center YCM - VMC 65A / Fanuc OM -CE marking -Control Fanuc OM -Operational condition / function video available -Travel X / Y / Z 650x410x615mm -Table dimensions 840x420mm -Speed range up to 6000rpm -Tool holder BT 40 -Tool magazine / side changer 16 compartment -Electric handwheel -Coolant device -Motor power 7.5 KW -Machine feet Dimensions: LxWxH 3.5x2.4x2.8 meters / Weight 4500Kg

Welding + Grinding Workbench + Vise - Table dimensions 1500x1000mm Dimensions: LxWxH 1.5x1.0x1.0 meters / Weight 500Kg