other metal working machines used for sale (11,250)

degree: 500 working heigth: - mmlength: 600 mmwidth: 600 mmdepth: 600 mmtotal power requirement: 21 A / 14,5 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1 x 1 x 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

volume capacity: - m³ / hPressure power: 7,5 barReceiver capacity: 1000 lpower requirement: 11 kWPacking: ? mShipping weight: ? ca. 600 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Drilling & Tapping in all directions- Can be moved in 7 axes- Fast preparation, accuracy and performence on heavy and bulky parts.- Field using Turbines, Generators, Compressors, Steel Construction, Boilers- Containers, Chemoical equipment, furnces of cement work and shipbuilding

Verstelbare buigmatrijs voor hoogwaardig staal Beschikbare maten: - V65 gt; V185 mm - V40 gt; V280 mm - V120 gt; V300 mm - V150 gt; V400 mm Aanpassing om de 10 mm De afstelling kan handmatig of halfautomatisch gebeuren. Neem contact met ons op voor meer informatie.

A 320T die-casting aluminium die-casting system is being sold Buckling pliers from the printing cylinder are worn out and need to be replaced. Spare parts are available and will be provided. Dismantling and removal by buyers Plant is handed over without power Dimensions approx. L650 W160 H380cm Transport dimensions approx. H 300cm VAT reclaimable Article location Nuremberg All information without guarantee

An aluminum die-casting machine is being sold. 140t Dimensions approx. H 370 L570 W 160cm Transport dimensions approx. H 370cm The system must be dismantled and transported away by the buyer himself. Plant is handed over without power. VAT is deductible Article location Nuremberg All information without guarantee

Refurbished 2022 Travel distances: X= 350 mm, Y= 250 mm, Z= 256 mm Travel of U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 (150 in the bath) mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achievable surface quality: Ra: 0.30 μm Medium contour tolerance: +/- 6 μm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Water bath machine with autom. Wire threading and rethreading after wire breakage

GeneralUniversal machining centre; Control: 3D control Heidenhain iTNC 530 Working area 1Longitudinal500 mmCross420 mmVertical380 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20 -18000 rpmSpindle taperHSK-A 63 Pick-up toolchangerPick-up tool changerNumber of tools 32NC rotary table w. swivel axisNC rotary table with swivel axisRotary air leadthroughRotary air leadthrough for NC rotary table with swivel axis 2x G1/8 interfaceRotation Speed 5. Axis 26 rpm5. Axes (swivelling range) 0 - 180 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 33 rpmDistance between T-Slots 63 mmNumber of Slots 5Slot width 14 mmMaximum load (table centre) 200 KgCentre bore 30H7 mmTable surface 500 x 380 mmType of Measuring system Direct measuring systemSpecial equipmentSealing air in swivel rotary table

weight: 1 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

COMPLETE LOT SPECIFICATIONS - 2x Fanuc R2000iB 165F industrial robots with RJ3iC controllers - 2x Gudel 8 metre linear tracks with bellows fully integrated - 2x HSD 8kW automatic tool change spindles, Year 2022.Inverters, cables, and full integration included Find more here - / Contact us at -

Manufacturer: MTcut Model: UE110-5A Type of Machine : 5-Axis CNC Vertical Machining Centre Power Supply: 400V / 100A / 70 KVA Compressed Air: 3/8 inch, 6-8 bar Coolant Tank: 120 litres Central Lubrication: R68 (ISO68) Hydraulic Oil: R32 (ISO32) Machine Weight: 9,000 kg Machine Bed: Cast Iron Travel and Work Envelope: - X Axis: 1,100 mm - Y Axis: 610 mm - Z Axis: 610 mm - B Axis (Swivel Head): -30 / +120 degrees continuous - C Axis (Rotary Table): 0.001 x 360 degrees - Spindle Nose to Table: 105 - 715 mm Spindle: - Speed: 14,000 rpm - Torque: 160 Nm - Power: 29 kW - Cooling: Water cooled - Tool Interface: HSK63 Swivel Milling Head: - Swivel Range: +30 / -120 degrees stepless - Speed: 11 rpm - Positioning Accuracy: 10 arc seconds - Max Holding Torque: 1,320 Nm - Drive: Siemens Torque Motor Rotary Table: - Diameter: 610 mm - Speed: 50 rpm - Positioning Accuracy: 15 arc seco ...

Hello, for sale is a very good used wire EDM machine of the brand Fanuc Robocut Alpha C400iC. The EDM machine has only 3288 operating hours and is from the year 12/2021. The Fanuc is still energized and is available at short notice. Prior sale and errors excepted.

A fully functional sandblasting system is being sold. Dimensions of working chamber approx. H180 W 150 D160 cm Dimensions approx. H400 W210 L210cm There are 2 lifts available Price per piece 8000 Euro net plus VAT Available from June 2026 If you buy both machines, you will get a basement extraction system with water separator free of charge. See other ads. The plant must be dismantled and transported away by the plant itself. There is only a 2t forklift on site The system is handed over by us without electricity. Article location Nuremberg All information without guarantee

Inv. Num. : 8988 Type: HD 16-6000 Producer: TOS Created: 1957 Parameters: Frame passage: 1600 mm Planner length: 6000 mm Weight: 20000 kg

Fiber laser cutting machine for profiles and pipes 3kW 230x6000 mm

Fiber laser cutting machine OTINUS 1500x3000 12 kW closed with exchange table

Fiber laser cutter OTINUS 1500x3000 3 kW with covered cutting head

Die-sinking EDM machine Manufacturer: Exeron Type: 312 Year of Make: 2004 Control MF10 Travel paths X/Y/Z: 450 x 300 x 300 mm Work table: 820 x 400 mm Working container: 900 x 520 mm Distance table / quill: 150 / 450 mm Max. electrode mass: 30 / 150 kg Max. workpiece weight: 800 kg Filling height work basin: 300 mm 20-fold tool changer Generator current: 60 A Power supply: 400 V Three-phase current: 50 Hz Power consumption: 8 kVA Overall dimensions W/D/ H approx.: 1,910 x 1,798 x 2,300 mm

THERMAL SHOCK CHAMBER

A CNC tube welding system Weil Technology for longitudinal seam welding is available. Tube diameter range: 76mm-600mm, Tube length range: 250mm-1550mm, Material thickness range: 0.8mm-2mm, Welding process: Laser, Max. welding output: approx. 80pieces/h. Documentation available. An on-site inspection is possible.

9 assen: Y1 / Y2 / X / R / Z / V / X1 / X2 / X3 3 CNC-gestuurde frontplaatsteunenCapacity: 2000 ton x 14 meter Backgauge: CNC Control: 2D Touch Passage between uprights: 12470 mm Max stroke: 900 mm Max distance between table -- ram: 1600 mm Depth of throat: 1255 mm Table width: 800 mm Locking speed: 77 mm/sec Working speed: 9 mm/sec Returning speed: 85 mm/sec Electric motor (power): 2x 90 kW Length: 16835 mm Depth: 5695 mm Height: 6750 mm (above floorlevel) Weight: 370 ton Capacity: 2000 ton Bending length: 14 000 mm

measuring range X-axis: 330 mmmeasuring range Z-axis: 400 mmrange L-W-H: 880 x 520 x 990 mmSpindle type: SK 50 (pneumatically fixable, 4×90°)Measuring systems: Heidenhain optoelectronic (LS series)Measurement: via integrated projector (20× magnification)Device weight: approx. 250 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

measuring range X-axis: 330 mmmeasuring range Z-axis: 400 mm1 tool presetterMake: KELCH, type: Kalimat C34, year 2002Measuring range X/Z 330 x 400 mmEasy-Wrap Set measuring software2 adapters VDI / HSK, tool tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.