other metal working machines used for sale (11,258)

3 assen: Y1 / Y2 / XCapacity: 220 ton x 3100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 2600 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Locking speed: 100 mm/sec Working speed: 8 mm/sec Returning speed: 80 mm/sec Electric motor (power): 19 kW Length: 3500 mm Depth: 1900 mm Height: 2700 mm Weight: 10,5 ton

gt; cap: 5 ton gt; max width: 1100 mm gt; manual clamping gt; non-driven unit

Macsa id K series CO2 laser coding and marking equipment. Manufacturer: Macsa ID Type: SPA K-1030 Power supply: 125V/230V; 50/60 Hz; (1 phase+N) 660VA Marking head: KS2-1000-10.2 μm, CO2 sealed laser tube, RF technology, 10.2 microns Working distance: 85-400 mm Dimensions: 235x193x656 mm Weight: 40 kg IP54

Measuring machine Tesa Xcel 7107

serial number: 1296 : ja changer: ja fachdocumentation: ja control: Heidenhain 426 weight of the machine ca.: 6 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: LEINHAAS Model: AR11-160 RH 1 Year of Manufacture: 1991 Mains voltage: 3x400V / PEN / 50Hz Control voltages: 220V AC 50Hz / 24V DC Press connected load: 44 kW Total connected load: 55 kW Machine operating hours: 62,212.3 h Machine type: differential travel press Press force: 1300 kN Additional equipment : The strip feed system can also be purchased separately - Strip feed system from ALBA (Includes coiler, straightener, and roller feed) Find more here - / Contact us at -

Voor een Afrikaanse klant hebben we een afrol- en op maat snijlijn opgeknapt en uitgerust met een eenvoudige, gebruiksvriendelijke Elgo-bediening.

Used parts cleaning system MOC 50 for operation with solvent or cold cleaner The machine is equipped with a lifting device with a rotation function, through which a basket is immersed in the degreasing medium using the immersion method, thus cleaning the parts. The heating function of the machine is defective, but this is irrelevant in the case of cold cleaner or solvent-containing medium. The system ran flawlessly until the end. Sale due to new acquisition.

Manufacturer: Ebu Model: STA 200/2000 Year of Manufacture: 2005 Overhaul: 2016 ( is currently equipped with a longitudinal transfer and has run very little since the overhaul) Punching force: 200 tons Installation space: 2000+800 Ram stroke: 16–160 Plunger adjustment: 0–120 mm Advance max.: 9999.9 Max. bandwidth: 300 Speed range: 30–150 Find more here - / Contact us at -

Manufacturer: SEDIN Model: 1525 Year of Manufacture: 1980 Type of Machine : Vertical Turning Lathe Turning Diameter: 2500 mm Table Diameter : 2260 mm Turning Height : 1600 mm Load on table max: 13.000 kg Machine weight : 36.500 kg approx Find more here - / Contact us at -

Manufacturer: WMG Model: BMT 105 PTP Year of Manufacture: 2003 Type of Machine : Horizontal Boring Machine Voltage: 400V Frequency: 50Hz Current Rating: 63A Protection Class: IP43 Control Voltage (Uc): 24V DC Machine Specifications: - Control: CNC Heidenhain TNC 124 - Table Size: 1750 mm x 2000 mm - Spindle Diameter: 105 mm - Travel (X/Y/Z/W): - X: 2500 mm - Y: 1850 mm - Z: 1400 mm - W: 700 mm Find more here - / Contact us at -

Tilting Rotary Table Shelf diameter: Ø 300 mm Manual tilt vertically + horizontally Maxi vertically tilt: 90° Base/shelf height horizontal position: 250 mm Height in vertical 90° position: 400 mm Seating Surface: Length 450 mm x Depth 500 mm x Height 250 mm Weight: approx 200 kg

Hardness Tester WOLPERT Testor - HT 1E Brinell: 250 kg Rockwell: 150 kg Projection: 125 mm Workpiece height - max.: 200 mm Machine weight approx.: 70 kg Approx. space requirement: 400 x 200 x 700 mm Test load: 62.5 / 100 / 150 / 187.5 / 250 kg. Brinell Dto. 100 and 150

Machine with water tank and automatic wire threading, cooling unit and software. XYZ axes 500 x 300 x 210 mm, taper +/- 15° at 100 mm height. Accessories: Dongel & laptop, various spare parts (nozzles, filters, etc.)

diameter: 20 - 100 mmworkpiece length: 3000 - 12000 mmnumber of rolls: 2 Control: Siemens SPS/PLC Tensile Strength: 70 kg/mm²feed speeds: 60 m/minAngle: 10 - 22 °main drive motor: 132 kWroll speed: 180 U/mintotal power requirement: - kWweight of the machine ca.: 24,5 tdimensions of the machine ca.: 7500 x 3000 x 2850 mMachine was retrofitted (Eletric) and not much used2 roller straightening machine, fully hydraulic and equipped with:- Siemens PLC/SPS control system- Hydraulic roller- Loading table with chain transport- Infeed channel with pressure roller- Pressure rollers- Gearboxes and motors- Siemens Sinamics drives- New electrical system- Hydraulic units- Spare set of rollers- Machine with complete hydraulic adjustment-- Upstroke of upper Roll: 210mm-- Hydraulic cap Stroke: 13mm-- Side Guides and Scrapers set at Exit: 20+35mm 35+65mm  ...

An HGH lapping-blasting system is available. Internal dimensions X/Y/Z: 2x590mm/400mm/250mm, max. workpiece weight: 100kg, overall system dimensions X/Y/Z: approx. 1250mm/700mm/1500mm, transport dimensions X/Y/Z: approx. 1600mm/1000mm/1650mm, weight: approx. 120kg. Documentation available. An on-site inspection is possible.

Mechanical/mechanical clamping system with force transmission, manually operated: mechanical/hydraulic clamping system · Deformation-resistant design for very high clamping accuracy · for use on machining centers with high quality and production performance · Drive spindle with clamping force presetting · grease fittings on both sides for lubricating all guides subject to wear and the spindle thread · Mounting thread M12 for workpiece stop · Stable chip protection prevents chips from penetrating the interior of the body · all guides hardened and ground · Height measurement of base body/workpiece support -0.02 · important for paired use · Supplied with step jaws reversible, hardened and ground. Other technical features: · Version: Model RKE - 3-sided clamping option · Can be clamped horizontally, vertically or laterally - Base body made of steel - hardened and ground - with fo ...

Inv. Num. : 8681 Type: S396/65 Producer: NABERTHERM Generated: Parameters: Power consumption: 24 kW Maximum temperature: 650 C Internal dimensions of the machine (LxWxH): 600 x 600 x 1100 mm Machine dimensions: 780 x 780 x 1730 mm Switching and control system with program controller

The machine is in good technical condition, testing is possible after prior agreement. The machine can also be sold with a stock of measuring probes, clamping plates, and connecting elements.

CNC lathe Type: ST-20 Y Manufacturer: Haas Year: 2023 Control: Haas Max.turning diameter: 298 mm Max.turning length: 572 mm Swing over support: 533 mm X: 213 mm Z: 572 mm C-axis Y-axis: +/- 50.8 mm Driven tools Tailstock Tool probe X/Y/Z axis rapid traverse - 24.0/12.7/24.0 m/min Spindle cone: A2-6 Max. power: 14.9 kW, spindle drive Vector Drive Max. torque: 203 Nm Max. spindle speed: 4000 rpm Spindle bore: 63.5 mm Automatic hydraulic chuck: 210 mm Turret MBT65 : 12 position Max. speed of driven tools: 4000 rpm Drive of all positions of the BMT65 turret Coolant tank: 208 l with pump El. connection 3x400V/50HZ, 14kVA Machine weight: 5300 kg Linear rollers pre-tensioned axis guide Central automatic lubrication - axes with grease / spindle with oil Lighting of the working space Automatic hydraulic 3-jaw chuck A set of tool holders (only for BOT or HYBRID revo ...

Manufacturer: Haas Model: ST-20Y Year of Manufacture: 2016 Voltage: 400V Phase: 3 Frequency (Hertz): 50/60 Hz Full Load Current: 27 Amps Largest Load Current: 18 Amps Short Circuit Interrupting Capacity: 10,000 Amps Wiring Diagram Reference: 96-0284 Short Circuit Current Rating: 5,000 Amps RMS symmetrical Find more here - / Contact us at -