other metal working machines used for sale (10,797)

turning diameter: / mmturning length: / mmworkpiece length: / mmDrum brakesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: div. number: 40x tool adaptor: BT 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: div. number: 40x tool adaptor: BT 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: div. number: 56x tool adaptor: BT 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: / mmthreading length: / mmthread pitch: / mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 10000 mmy-travel: 1500 mmz-travel: 2700 mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: div. number: 16x tool adaptor: SK 50 Tool Package DSSK 50Other quantities also possible!A total of approx. 600x SK 50 holder availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

laser capacity in Watt: WDimensions (L/W/H): 10000/2500 mmWeight: 3500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 5,0 tthroat: 215 mmworkpiece height max.: 445 mmMandrel diameter: 50 x 50 x 645 mmtable plate: Ø 275 mmtotal power requirement: manuell kWweight of the machine ca.: 160 kg.dimensions of the machine ca.: 370 x 550 x 810 mmDescription :- for pressing in and out of bearings, bushings, ...- the basic body of the model DP 5 made of high-quality gray cast iron- Includes mounting holes, ideal for mounting on a workbench- suitable for bushing, straightening, bending, broaching, ...- variably adjustable lever bar, depending on the required effort- ideal for repair shops and the general workshop areaThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 580 mmturning length: 1500 mmcontrol: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: n mmspindle passage: 20 mmturning length: mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: / mmturning length: / mmworkpiece length: / mmDrum brakesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: / mmturning length: / mmworkpiece length: / mmDrum brakesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: - tdiameter: 3 mmtotal power requirement: 2 kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1,5 x 1,5 x 2 mrivetting machineWorkspace: Ø 3The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 800 mmwidth: 600 mmheight: 1200 mmweight of the machine ca.: 0,4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

groove width: 6-20 mmdrawing length: - mmworking speed: - m/mintotal power requirement: 3 kWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 1 x 0,7 x 1,6 mNo. 0319Grooving machine with various drawing tools Frömag KZ-225 drawing tools in the sizes 6 / 8 / 10 / 12 / 20 mm5 holders for bores from 10-35 mmTransport dimensions approx. 1000 x600 x1600 mmWeight approx. 700 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 5000 mmplate depth: 2000 mmplate height: 400 mmtotal power requirement: kWweight of the machine ca.: 9,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 2000 mmwidth: 700 mmwork height max.: 900 mmdimensions of the machine ca.: 2,0 x 0,7 x 0,9 mweight: 130 kgWorkbench - Made in GermanyIndustrial quality, particularly robust and durable design for the highest demands!demands!Workbench top 45 mm thick made of high-quality multiplex beechThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

longitudinal travel: 400 mmcross travel: 160 mmtable length: - mmtable width: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10.0 barEffective free air delivery: 700 L/minmotor: 400 V0: 250 Literweight of the machine ca.: 397 kg.total power requirement: 5.5 kWrange L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price: 8.848 euros / special price on request Made in GermanyFurnishing:- with container and dryer / can be used immediately- Microprocessor control SOLID base control- Network pressure sensor- Belt driven drive system- low compressed air temperature due to effective aftercooler- lying underneath compressed air tank- including cold compressed air dryer automatically working with pre- and post-filter ( mounted )(also available with 7.5 bar)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

longitudinal travel: 400 mmcross travel: 160 mmtable length: - mmtable width: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

brinell hardness: - rockwell hardness: - throat: - mmweight of the machine ca.: - tdimensions of the machine ca.: - msclerometerDrive: 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: ISO 50 quill stroke: 150 mmturning speed range: 40 - 3600 U/mindrive motor: 22/33 kWswival range +/-: 23 °weight of the machine ca.: 0,8 tdimensions of the machine ca.: 1,811,2 mAssemblies for RAMBAUDI Rammatic 1201:1. milling head SK 50 / 22 kw / 40 - 3,600 min-1and:3. 30-fold tool magazine COSTELLI 7. measuring system / glass scale Heidenhain LS 706 C / ML 2840 mm8. measuring system / glass scale Heidenhain LS 706 C / ML 1140 mm 9. measuring system / glass scale Heidenhain LS 706 C / ML 1440 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: / mmthreading length: / mmthread pitch: / mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): mmthroat: mmbore stroke: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bed length: 2790 mmbed width: 2 x 240 mmbed height over floor: - total power requirement: 0 kWweight of the machine ca.: 5,6 tdimensions of the machine ca.: 3,51,61,6 mNo. 03022-station end trimming machine /cutting and centering machineEMAG, type TEC 2/1000 SSIEMENS System 3 controlWorking area: diam. 6.3-25 x 180-1000 mm, drive power: 12.5 kWAccessories:Loading gantry, chip conveyor, coolant device, internal coolant supply for station 1.coolant supply for station 1.The machine is equipped with 4 spindles, which are steplesslyinfinitely variable from 500-5000 rpm via separate DC motors.adjustable. Processing options: Grooving, peeling,turning, drilling (thread), thread chasing, chamfering, countersinking.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

balancing body min/max.: 0,1 - 1 kgbalancing body diameter w/o machining unit: 300 mmbalancing body diameter with machining unit: - total power requirement: 0,7 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 10,61,2 mNo. 0304Vertical balancing machine SCHENCK Z 35 EWorking range: max. test piece 300Control: Test piece weight 100 g - 1 kgDrive: .7The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

square edge steel: 16 x 16 mmflat steel: 100 x 5 mmL-beam: 60 x 8 mmround bar steel: 18.0 mmweight of the machine ca.: 33.0 kgProperties :- For precise cold and hot bending of flat, round and square steels- Sturdy design for bolting to the workbench- Infinitely adjustable bending stop with locking pin- With eccentric quick clamping for efficient working- Readable bending angle up to 120- High repeat accuracy thanks to bending angle stop- Ideal for repair workshops and locksmiths- - - - - - - - - -Cold bending capacityFlat steel 100 x 5 mm 65 x 10 mmRound steel 18.0 mmSquare steel 16 x 16 mmAngle steel 60 x 8 mmBending capacity hotFlat steel 100 x 15 mm 75 x 20 mmRound steel 27.0 mmSquare steel 25 x 25 mmAngle steel 100 x 12 mm- - - - - - - - - -Scope of delivery:- Bending plate sharp / round- Radius bending plate R 20 / R 25- Offset block- Bending plate for round bar- Offset plat ...

thread dia.: 1/4 bis 3 / 75 mmthreading length: ? mmthread pitch: ? mmturning speeds: 33 U/mintotal power requirement: 1 kWvoltage: 230 Vweight of the machine ca.: 0,074 tdimensions of the machine ca.: 1,20,81 m2 Die heads,4 sets of cutting dies,Pipe cutter, Foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: / mmturning length: / mmworkpiece length: / mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.