other metal working machines used for sale (10,959)

screw size:45 mminjection shot weight in Polysterol:149 g/PSclosing pressure:100 kN

swing diameter:80 mmworkpiece length:450 mmweight of the machine ca.:3500 kg

centre height:500 mmcentre distance:2000 mmcontrol:CNC Grundig Numerik total power requirement:400 V, 50 Hz, 22,5 kWweight of the machine ca.:3300 kgdimensions of the machine ca.:2500 x 4000 x 2400 mm

table length:920 mmtable width:600 mmampere:13,2 Aweight of the machine ca.:6 tdimensions of the machine ca.:2,46 x 2,24 x 2,33 mX-axis:600 mmy-axis:400 mmZ-axis:260 mmmax. table load:1500 kgThe dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg.

measuring range X-axis:150-300 mmmeasuring range Y-axis: mmTable dimensions: mmmeasurement range Z =:450 mmtool diameter: mmtool taper: SKcompressed air: bardimensions: mmachine weight ab.: kgclamping surface upper angle: Mounted on 1 cabinet, equipped with 2 monitors, with keyboard, 1 control computer, 1 operating data printer

x-travel:1120 mmy-travel:370 mmz-travel:410 mmtotal power requirement:14,5 kWweight of the machine ca.:3850 kgdimensions of the machine ca.:3,5 x 3,5 x 2,2 mTable dimensions:400 x 1600 mmspindle taper ISO:50

Oil filterCapacity:3 x 120 l/min; 3 bar3 x 140 l/min; 15 bar

x-travel:500 mmy-travel:250 mmz-travel:325 mmtable-size:400 x 200 mmT-slots:10/ 20 mmT-slots:4 Stworkpiece height max.:300 mmtemplate table:380 x 380 mmspeeds::2500 - 20000 U/minno. of turning speeds:3 total power requirement:0,25 kWweight of the machine ca.:430 kgdimensions of the machine ca.:1000 x 1200 x 1500 mm

table diameter:500 mmtotal power requirement:3 kWweight of the machine ca.:2 tdimensions of the machine ca.:2300 x 1270 x 2200 mm

groove width:1,5 , 12, 14 mmtotal power requirement:380V, 50Hz, 32A, 15 kWweight of the machine ca.:5,6 tdimensions of the machine ca.:4000 x 750 x 1300 mm

max. wheel diameter:180 mm

max. wheel diameter:180 mm

number of spindles:6 spindle passage:18 mmturning length:63/50 mmweight of the machine ca.:4,5 tspindle drive motor:11 kW

measuring range X-axis:500 mmmeasuring range Y-axis: mmTable dimensions: mmmeasurement range Z =:1000 mmtool diameter: mmtool taper: SKcompressed air:4-6 bardimensions: mmachine weight ab.: kgTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2026, Josef Weber. All rights reserved.

sheet width:3050 mmplate thickness:4 mmtotal power requirement:9 kWweight of the machine ca.:6 tdimensions of the machine ca.:3900 x H 1850 x T 2100 mm

turning diameter over bed: n mmspindle passage: 20 mmturning length: mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 580 mmturning length: 1500 mmcontrol: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter:3 - 150 mmgrinding length:200 mmtotal power requirement:380V, 50Hz, 30 kWdimensions of the machine ca.:5 x 3 x 2,5 m

grinding diameter: 0,2 - 190 mmgrinding length:400 mmcentre height:100 mmweight of the machine ca.:1,6 tdimensions of the machine ca.:2 x 1,5 x 1,8 m

indexing:Länge =< 1050 mmtable::Teilungslänge =

1 Markert Cleantec continuous surface cleaning machine, year of manufacture: 2003 Continuous length approx. 7,000 mm with division into washing zones, rinsing zone, and blow-off system with associated transport system with 2 x 90° curved elements with chain drive with electric control for transporting wire mesh baskets, primarily 400 x 600 mm with associated control cabinet for controlling the timed material flow Machine no.: 932

Total force (nominal):800 toClamping surface (left-right):x mmClamping surface (front-back):x mmtable surface area:3200 X 2200 mmTotal force (nominal):2-3-4-5- Presse - 600 to. totable surface area:2-3-4-5- Presse 3100 X1900 mmLast overhaul 2010/2020, consisting of:Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by SiemensBlank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet dischargeGripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. 0602300Double-column press, manufacturer Weingarten, type ZS 1200.34Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface and drawing  ...

valve dimensional inspection

diameter:500 mmworkpiece weight:30 kgtest dia. min.:200 mmtotal power requirement:0,03 kWweight of the machine ca.:1000 kgdimensions of the machine ca.:1x0,5x1,06 m

measuring range X-axis:-50 . 530/830/1030 mmmeasurement range Z =:605/805/1005 mmtool taper:30 & 40 VDIcompressed air:6 bardimensions:2200 x 1200 x 2100 mmachine weight ab.:900 kgVertical Toolsetter with Cutting Edge detection via Camera System.Operating over CNC Control yb PC System or Manually, 3 axes, CNCEquipped with Modular Prescision Spindle with CNC Rotary Axis. Digital Glas Scale in all Axisand Linear Roller bearing in all Axis of the Slide Carriage.Electronic measuring equipment:PC electronics with intelligent KELCH EasyVision image processing17" TFT colour monitorOptional: second 17" TFT monitor for full screen measuring windowThe CNC Toolsetter is in good condition and ready for immediate use.