other metal working machines used for sale (10,797)

Available 3/2027 after medium overhaulSiemens S840 DISO 502-axis head K4,000 rpm1,000 Nm30 kW2,000 x 8,000 mm7,000 mm2,800 mm1,100 mm2,550 mm40 tools

CNC pipe bending machine Type: CNC 65 TBRE Manufacturer: CSM Year: 2010 Maximum pipe diameter: 65 mm Steel (≈ 400 MPa): Ø 65 × 2.0 mm Stainless steel (≈ 600 MPa): Ø 65 × 1.4 mm Aluminum: Ø 65 × 3.5 mm Solid round material: Ø 30 mm Maximum bending angle: 190° Machine weight: 4400 kg In good condition, fully functional Find more here - .ucymachines/ Contact us at - sales@ucymachines

sheet width: 2000 mmplate thickness: max. 4000 mmmake: 2974 rear stop: ja foot pedal: ja degree: steuerbar weight of the machine ca.: 3,93 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Workbench, work table, assembly bench, assembly table, work table, base -Base frame: Work table tubular frame frame with mounting plates for swivel casters -Width: 1200 mm -Depth: 800 mm -Height: 720 mm -Quantity: 1x workbench available -Weight: 29 kg

Key data: 600 mm, 400 mm, 310 mm

High-quality FANUC wire EDM machine in top condition. The machine is well-maintained, ready for operation and is suitable for precise wire EDM work in tool, mould and precision machine construction. Manufacturer: FANUC Model: ROBOCUT α-1iD Type: A04B-0320-B001 #E5 Machine No.: P089D1671 Year of manufacture: 09/2008 Control: FANUC Series 310iS-WA Machine Type: CNC Wire EDM Machine X-axis: 600 mm Y-axis: 400 mm Z-axis: 310 mm U-axis: 200 mm V-axis: 200 mm Rapid traverse X: 900 mm/min Rapid traverse Y: 900 mm/min Rapid traverse Z: 900 mm/min Rapid traverse U: 450 mm/min Rapid traverse V: 450 mm/min Max. workpiece weight: 1,000 kg Machine weight: 3,000 kg Mains connection: 200 V AC, 3-phase, 50/60 Hz Connected load: 13 kVA Automatic threading of the wire Processing in a full bath Suitable wire diameter: 0.10-0.30 mm Condition: Top Condition Location: Freiburg

Manufacturer: SURFIN Year 2020 Condition Used Stock number 9377 Air capacity: 26000 m³/h Internal dimensions of the machine (LxWxH): 6000 x 4000 x 2800 mm Drying up to 60 °C, Electrical connection: 24 kW, Including E1 – air supply and E2 – exhaust air; E3 – Exhaust gas discharge optional by arrangement.

Some information about the condition: Classic-3S • High-pressure pump defective (pictures attached), machine ran without any worries so far • 08.08.2023: X+Y spindles overhauled, therefore backlash-free • 07.10.2024: new U-motor installed Progress 2 • Machine functional, cuts easily at low generator levels and when finishing • Problems occur at high roughing levels because the lower gap box has a defect • 26.06.2023: X+Y spindles overhauled, therefore backlash-free • September 2024: new U-motor installed • September 2025: new stern-motor installed and timing belt renewed

CONTROLS  electronic controls ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1500 mm  space requirements -front/back-: 1250 mm  total height: 2100 mm- Polishing cell C710 (1970 houres in production)Equipment of the machine:Collaborative UR3 e-series robot with intuitive HMIAutomatic compensation for tool wearPolishing station Crevoisier C5100 (drive polishing tools)Spindle for holding standard Crevoisier colletsIntegrated suction with 14m/sRenishaw measuring probe for position detectionPalletizing for approx. 40 STK 2 Pal.Two polishing paste dispensers with a capacity of three liters each

https://mhpdocs.logotech.de/1083/1083-03407-08092025165136958.jpg

Workbench, work table, assembly bench, assembly table, worktable, wooden workbench table, aluminum workbench table -Workbench: Workbench table with drawers / solid construction, height adjustable -Width: 2000 mm -Depth: 800 mm -Height: 760 mm, adjustable, see photos -Weight: 74 kg

Max. bar length: 1400mm, bar diameter: 6.35-80mm, weight: 450kg, accessories: cabling, servo amp, bar pusher 52D=12, bar pusher 52D=15, bar pusher 52D=21, with delivery note, copy of the invoice, various manuals, operating and maintenance instructions. An on-site inspection is possible.

A two-station tube deburring machine is offered. Tube diameter: 8mm. Processing stations: 2. Including deburring tools and control cabinet. An on-site inspection is possible.

Technical data: Manufacturer: Keyence Type: XM-C1000 Series 3D Projector Control: Keyence Measuring range: 600 x 300 x 200 mm Smallest display unit: 1 μm Smallest angle: 0.0001° Table load: max. 25 kg individual components 3D Manufacturing Probe: XM-P2000 Coordinate Measuring Machine| XM-C1000 3D Fabrication Measurement System Monitor: XM-M1200 3D Manufacturing Metrology Control Unit PC: XM-1600 Model RO66-55 3D Manufacturing Measurement System Camera and Table: XM-S1200 Condition Condition: Used Functional: tested and fully functional Other equipment and accessories included: incl. mobile tool trolley incl. per original packaging box

A CNC sinker EDM machine is offered. Travels X/Y/Z: approx. 565mm/400mm/415mm, table size: 840mm/600mm, max. workpiece weight: approx. 1000kg, max. dielectric fluid level above the table: approx. 360mm. Machine dimensions X/Y/Z: approx. 1110mm/1840mm/2780mm, machine weight: approx. 2750kg. An on-site inspection is possible.

A BÊCHÉ hydraulic short-stroke die forging hammer is offered for hot forming and die forging of workpieces. Working capacity: 16kJ, continuous blow frequency at full load: approx. 32/min-38/min, max. blow frequency: 122/min, final ram velocity: 5.1m/s, main drive pump flow rate: 187.5l/min, circulation pump flow rate: 120l/min, oil capacity in the drive head: 550l, clear width between the guides: 520mm, working height to upper edge of insert: 750mm, ram depth: 470mm, insertion depth: 550mm, die height min./max.: 120mm/320mm. Total weight: approx. 23.2t, anvil bed, overall dimensions X/Y/Z: approx. 1485mm/825mm/4552mm, max. space requirement/foundation dimensions X/Y: approx. 3350mm/3300mm. An on-site inspection is possible.

DMF260/11 → Year of manufacture: 2011 Heidenhain TNC 530 Spindle SK 40 – 18,000 rpm Machine hours: 54,877 Spindle hours: 21,845 Condition: second-hand However, it is currently still in use and will be available in 2027 Find more here - .ucymachines/ Contact us at - sales@ucymachines

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet, 2 doors, solid construction -Width: 950 mm -Depth: 420 mm -Height: 1950 mm -Shelves: 9 pieces, but only 2 mounting brackets -Door: lockable, without key -Weight: 67 kg

The machine is in good technical condition; it can be tested by prior arrangement.

IRLE IRD 1600 CNC End Machining Machine Manufacturer: IRLE Type: IRD 1600 CNC Year of manufacture: 2004 Control: max. Ø to be machined 1,625 mm min. pipe diameter to be machined 406 mm max. pipe length to be machined 13,200 mm min. pipe length to be machined 6,000 mm min. pipe wall thickness 12 mm max. pipe wall thickness in copying approx. 40 mm max. pipe wall thickness to be machined in CNC operation 70 mm max. pipe weight to be picked up 250 KN Height between hall corridor and pipe inlet 800 mm Total length of the machine approx. 24,000 mm Total width of the machine approx. 4,100 mm Total height from floor to upper edge of vise 5,000 mm Machine weight approx. 700 KN 01 - Intermediate bed with travel drive Bed length approx. 3,950 mm Bed width approx. 1,800 mm Bed height including chassis approx. 600 mm Travel speed on the foundation rails 500 - 5,000 mm/min. 01 - Inte ...

ERCOLINA MB 42 / Mandrel tube bending machine -CE - Identifier -Year of construction 2009 -Bending capacity / steel tube 42.4x3mm -Max. tube diameter aluminum / copper 54x2mm -Bending performance furniture construction tube 48x1.5mm -Solid material up to 30mm -Max. bending angle 210 degrees -Electronic control with digital display -Max. 30 x program memory -Programs with 9 x bends - Overload Protection / Yes - Operation: Double foot pedal ( bend - return) -Max. bending speed 2rpm -Incl. 1x tool -1.1 KW -Footswitch -Documentation Dimensions: LxWxH 0.5x0.6x1.2 meters / Weight 100Kg

CONTROLS  CNC controls WORKING RANGE -WIRE CUTTING-  X-axis travel: 500 mm  Y-axis travel: 350 mm  z-axis travel (vertical): 426 mm  conical operation for max.: 30 °  U-axis travel: 140 mm  V-axis travel: 140 mmWIRE SYSTEM  wire diameter (min): 0.15 mm  wire diameter (max): 0.33 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1940 mm  space requirements -front/back-: 2300 mm  total height: 2600 mm  total weight approx.: 4200 kg