other metal working machines used for sale (10,922)

X-axis: 550mm, Y-axis: 350mm, Z-axis: 400mm, U-axis: 550mm, V-axis: 350mm, connected load: 12kVA, length: 2810mm, width: 2600mm, height: 2080mm, weight: 2.85t, operating hours: 28,608h, with documentation, an on-site inspection is possible.

CONTROLS  CNC controls YASKAWA DX200 4-axis palletizing robot as good as new, never in usePayload 500 kgUp to 1200 cycles/hourVertical reach 3024 mmHorizontal reach 3159 mmWeight 2300 kg 2 units available

Plastic 3D printer manufactured in 2023. This FORMLABS Fuse 1 + 30W features Selective Laser Sintering (SLS) technology with a build volume of 165 × 165 × 300 mm. It is equipped with a 30 W Ytterbium Fiber Laser and a 10.1 interactive touchscreen for user-friendly operation. If you are looking to get high-quality 3D printing capabilities, consider the FORMLABS Fuse 1 + 30W machine we have for sale. Contact us for further details.

Tap for blind hole drilling -Tap tools: extensive range -Type: Coarse and fine threads, see photos -Sale: only complete set -Transport dimensions: 1200/800/H120 mm -Weight: 205 kg

30 Watt CO2 Laser Working area: 457 x 30 mm Engraving and cutting of wood, paper, rubber, acrylic, etc. Extraction Atmos Cube PC: HP ProDesk 400G7 Small Form Factor PC incl. monitor, keyboard and mouse. Software: RayJetManager pre-installed

Technical data: Manufacturer: Garant Type: HC1 Year of Make: 1998 Measuring range: 600 mm Measuring force: 1 N +/- 0.2 N Resolution: up to 0.0002 mm Dimensions and weight Dimensions: 24 cm x 25 cm x 100 cm Weight: approx. 30 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Control and evaluation device HD1 (membrane keypad with pressure point)

Supply voltage: 1~ 230V AC, rated current: 16A, mains frequency: 50Hz, connected load: 0.64kA, CE marking. On-site inspection is possible.

Build volume including build platform: 250x250x325mm, laser type: Yb fiber laser (ytterbium), 1x 200W, 1x 400W, manufacturing process: metal powder bed fusion (DMLS/SLM), precision optics: F-theta lens, high-speed scanner, max. scanning speed: 7m/s, variable focal spot diameter: 100-500µm, power supply: 32A, connected load: 8.5kW, nitrogen generator: integrated, compressed air supply pressure: 7,000hPa, volume flow rate: 20m³/h, argon supply pressure: 4,000hPa, volume flow rate: 100l/min, length: 2,200mm, width: 1,070mm, height: 2,290mm, min. recommended installation space: 4,800x3,600x2,900mm, weight: 1.325t, operational hours counter: 1138h, both lasers must be configured or initialized before operation. On-site inspection is possible.

Equipped with two independent extruders, build volume: 260x350x340mm, standard nozzle: 0.4mm, interchangeable, additional sizes optional, layer thickness: 0.05-0.6mm, software compatibility: Simplify3D, Cura, Slic3r, file formats: STL, OBJ, G-code, print bed: heated glass/metal platform, temperatures: extruder up to 260°C/heated bed up to 120°C, power supply: 230V, 50/60Hz, length: 840mm, width: 750mm, height: 1,020mm, weight: approx. 400kg, total operating time: 131 days, 17h, 25min, 7s, longest print job: 2 days, 14h, 6min, 35s, filament consumption: 19,912.05m. On-site inspection is possible.

This 3-axis GRENZEBACH FSW Machine DSM 2400 was manufactured in 2019. It features a working area with X-axis travel of 1,400 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 600 mm. The machine has a maximum spindle speed of 5,000 rpm and a total weight of 23,250 kg. If you are looking to get high-quality friction stir welding capabilities, consider the GRENZEBACH FSW Machine DSM 2400 we have for sale. Contact us for further details.

This 3-axis GRENZEBACH FSW Machine DSM 3000 was manufactured in 2021. It features a working area with an X-axis of 1,400 mm, Y-axis of 3,000 mm, and Z-axis of 400 mm. The machine has a maximum spindle speed of 5,000 rpm and a rapid traverse of 20 m/min. If you are looking to get high-quality friction stir welding capabilities, consider the GRENZEBACH FSW Machine DSM 3000 we have for sale. Contact us for further details.

Indexable insert drills, high performance drills with indexable inserts, solid drills, end mills, end mills, milling cutters, indexable insert mills, end mills with internal cooling, indexable insert end mills -Finger milling cutter: indexable insert end mill with internal cooling, 2 pieces -Receptacle: Ø 25 mm -Diameter: 25 and 30 mm -Levy/Price: complete -Transport dimensions: 210/70/H40 mm -Weight: 1.0kg

Key data: 320 mm, 220 mm, 255 mm

Manufacturer: FANUC Model: Robocut Alpha-0iC A04B Year: 2006 Condition: Used Stock No: 9607 Control System: FANUC Series 180iS-WB Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 220 mm Max. travel length of the Z-axis: 255 mm Feed length in U-axis (+-): 120 mm Feed length in the V-axis (+-): 120 mm Maximum table load: 500 kg Machine weight: 2000 kg

lapping machine, year 2016, 9977 operating hours. Used machine. More info & price on IndustrialBuyer.

Ram weight: 100kg. Including anvil block, anvil, standard dies and motor. Total weight: approx. 3400kg including anvil block. The machine was purchased in working condition in 2019 and has not been operated since. The hammer has very good compression and is in good condition. Low operating hours, no continuous operation. The sliding surfaces of the ram are greased. Documentation available. An on-site inspection is possible.

Drive: servo motors, individually for each axis, max. number of bending slides: 8, spring steel wire diameter: 0.2-1mm, copper wire diameter: 0.3-2mm, max. winding mandrel diameter: 10mm, max. winding spindle travel: 45mm, max. length of rotating initial leg: 50mm, end leg length: theoretically unlimited, winding spindle revolutions: limited by the winding spindle travel of 45mm, control system: 4-axis CNC positioning control Pronumerik Schleicher, the machine operates using DOS-based programming, including pay-off reel, accessories, operating manuals and documentation, well-maintained and in good condition. On-site inspection is possible.

General2 spindles automatic lathe - 2 cross slides - Main and counter spindle - Y axis on slide 1 - Y axis on slide 2 - C axis on main spindle - C axis on counter spindle - Chip tank with coolant system and coolant pump - Part unloading chute; Control: Numeric control Fanuc 32i Working areaBar diameter max.20 mmCounter spindle collet cleaningCounter spindle collet cleaning with coolant Changing kit from steady to sliding headstockChanging kit from steady to sliding headstock including application bush type Dunner B260 and bush-spindle syncronism Additional charge for belt type chip conveyorAdditional charge for belt type chip conveyor, compatible with shaft-unloading-device Specific chip removol systems (for example: scraping blades chip conveyors, with additional filtering systems) are recommended in case of short chip material machinin Oil mist filter for emulsion or oilOil m ...

GeneralTwo-spindle turning centre with - 2 cross slides - 2 turrets with 12 positions each (all driven) - main spindle and counter-spindle - 2 C-axis - 2 tool drives - Y-axis on slide 1 - chip conveyor - workpiece-unloading; Control: Fanuc 31i Working areaBar diameter max.50 mmTransport beltTransport belt for finished workpieces outside the machine DMG MORI NETSERVICEDMG MORI NETSERVICE Qualified support by Internet-based remote diagnostics IoT connectorDMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS) Special equipmentAdditional bar capacity for main spindle from Ø 50 mm to Ø 65 mm (max. 5.500 RPM) Additional charge for cooling on turret (upgrade to) 50 bar instead of 25 bar

GeneralCNC Grindingmachine; Control: Fanuc 32iA Special equipmentRMS-Sensor Special equipment-Transformer - Handwheel - 680l coolant system Special equipment- Program memory (512kb) - Registerable programs (1000 pcs.) - Signal light (3-stage) - High-performance magnetic separator (120 l/min) - Bed cleaning - Coolant temperature control unit - Wheel spindle cooling function - ATC unit (6 tools)

GeneralUniversal machining centre; Control: 3D control Heidenhain iTNC 530 Working area 1Longitudinal500 mmCross420 mmVertical380 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20 -18000 rpmSpindle taperHSK-A 63 Pick-up toolchangerPick-up tool changer Number of tools 32 NC rotary table w. swivel axisNC rotary table with swivel axis Type of Measuring system Direct measuring system Table surface 500 x 380 mmCentre bore 30H7 mmMaximum load (table centre) 200 KgSlot width 14 mmNumber of Slots 5 Distance between T-Slots 63 mmRotation speed max.4. Axis 33 rpm4. Axes (swivelling range) 360 x 0,001 degree5. Axes (swivelling range) 0 - 180 x 0,001 degreeRotation Speed 5. Axis 26 rpmRotary air leadthroughRotary air leadthrough for NC rotary table with swivel axis 2x G1/8 interface Special equipmentSealing air in swivel rotary table

GeneralCNC Swiss type lathe with Fanuc control; Control: FANUC 310 iTB Working areaTurning diameter33 mmDrive for support for back workingDrive for support for back working operation (slide 2) power 0.55/1.1 KW Special equipment-Chip convoyer with discharge height 1200 mm Special equipmentRMS-Sensor Special equipment-Self-regulating double-cone guide bushing -600 l cooling system. 8 and 20 bar pump, paper belt filter - IEMCA Boss 545/32 e automatic bar feeder, max. length 3200 mm.

wire EDM machine, year 2015, 17190 operating hours, CNC Mitsubishi Electric, schermo a colori con tastiera e telecomando portatile. Used machine. More info & price on IndustrialBuyer.

Offered for sale is a manual powder coating booth with a cartridge filter system. Technical data: Usable volume: 9.5m³, airflow rate: 12000m³/h, downward air velocity: 0.25-0.3m/s, total filter area: 160m², maximum powder melting point: 220°C, maximum dimensions X/Y/Z: 2200mm/200mm/2000mm. Control system: Integrated spray gun and control unit for manual powder coating. Equipment: Booth, platform, filter system, eight cartridges. Operation: 2020/2021 two-shift operation, subsequently approx. 30% daily utilization. System documentation available. Inspection possible by arrangement.

Offered for sale is an electric tempering oven with a maximum operating temperature of 250°C. Approx. dimensions X/Y/Z: 3000mm/2200mm/2500mm. Operation: 2020/2021 in two-shift operation. Inspection possible by arrangement.

Offered for sale is an electric tempering oven with a maximum operating temperature of 100°C. Approx. dimensions X/Y/Z: 1800mm/1800mm/1600mm. Operation: 2020/2021 in two-shift operation. Inspection possible by arrangement.

Shaper cutters from Module 1 to Module 14 available:- different no. of teeth, different pressure anles, different profiles, bores and sizes!shaft cutters Module 1-3 = 150 Euro, 4-5 = 250 Euro, >5 = 300 Eurodisc cutters Module 1-3 = 150 Euro, 4-6 = 200 Euro, 7-10 = 250 Euro, 10-14 = 300 Euro.complete list on request!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FANUC ROBOCUT α-1iC wire EDM machine wire cut EDM machine Year of manufacture 2004 Type A04B-0316-B001#E5 FANUC ROBOCUT α-1iC Technical Data Specification Details Machine Type: CNC Wire EDM Machine Model No.: ROBOCUT α-1iC Your article number: A04B-0316-B001#E5 Date of manufacture: March 2004 Serial Number: P043C1119 CNC Control: FANUC Series 180is-WB Controlled axes: 5 – X, Y, Z, U, V Travel X: 550 mm Travel Y: 370 mm Travel Z: approx. 310–410 mm (depending on configuration) Travel U: ±60 mm / 120 mm total Travel V: ±60 mm / 120 mm total Rapid traverse speed X/Y/Z: 900 mm/min Rapid traverse speed U/V: 450 mm/min Table size: approx. 780 × 600 mm Maximum workpiece approx. 820 × 730 × 300 mm Maximum workpiece weight 1,000 kg Wire diameter 0.10–0.30 mm Automatic wire threading: Yes Maximum conicity approx. ±30° Minimum programmable increment 0. ...

https://mhpdocs.logotech.de/1083/1083-03407-08092025165136958.jpg

Plastic 3D printer manufactured in 2002. This Stratasys FDM TitanTI supports various model materials including ABS and PC, with a tip size of T16. It features an envelope temperature set point of 145 °C and comes with optional accessories such as software, maintenance tools, and a large ultrasonic wash bath. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys FDM TitanTI machine we have for sale. Contact us for further details.