other metal working machines used for sale (10,801)

sheet width: 1550 mmplate thickness: 6 mmdiameter of upper rolls: 228 mmdrive: elektronisch zwei angetri The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tweight of the machine ca.: 4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1500 mmplate thickness: 5 mmweight: 3,8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. ram stroke: 600 mmthroat: ca. 400 – 800 mmtable diameter: - mm: 320 mm total power requirement: - kWweight of the machine ca.: 8 tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter max.: 1-150 mmregulating wheel width: 100-200 mmweight: 5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Dreistern roll forming machine is offered. Main drive power: 9.2kW, production direction: right to left, roll shaft diameter: 30mm, roll shaft connection: 20mm, tooling width of roll stand type 1: 135mm, center distance of type 1: 130mm, adjustment range of type 1: 60mm-100mm, tooling width of roll stand type 2: 210mm, center distance of type 2: 260mm, adjustment range of type 2: 80mm-130mm, control system: Siemens SIMATIC HMI. The gearbox has been fully overhauled. Inspection by appointment is possible.

: rechts Ausklink / links S fence: elektronisch ja /neinfoot pedal: mechanisch weight of the machine ca.: 1,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rump wire belt blasting machine type Xedura 1500, good condition, serviced 1x per year

Jet house with screw compressor and boiler - Maintenance 1x a year Blast Chamber Size: 2500x2500mm

with osmosis device, oil separator and drip pan Dimensions: width x depth x height = 4.1m x 7.1m x 4.1m (double bottom tray) Workpiece for machining max.: width x depth x height= 1m x 5.2m x 2.1m

CONTROLS  CNC controls SIEMENS 840 D SL CHARACTERISTICS HEAT TREATMENT EQUIPMENT  heating method: induction DIMENSIONS / WEIGHTS  space requirements -left/right-: 8044 mm  space requirements -front/back-: 8046 mm  total height: 4000 mmELECTRICAL SPECIFICATIONS  mains power supply: 624 kVAPower Data:Mains connection power: 624 kVAMains voltage: 400 VRated current: 900 AMains frequency: 50 HzTransformer:Power: 560 kVAVoltage: 400 / 580 VCurrent: 809 / 558 AFrequency: 50 HzConverter:Power: 552 kVA / 450 kWVoltage: 750 VCurrent: 667 AFrequency: 6 – 10 kHzStarting:Power: 50 kWVoltage: 400 VCurrent: 90 AFrequency: 50 HzAuxiliary Equipment:Voltage: 400 VCurrent: 25 AFrequency: 50 HzControl Voltage:Voltage: 230 / 24 VCurrent: 5 / 40 AFrequency: 50 Hz / DCAutomation KUKA Roboter

CONTROLS  electronic controls BOSCH REXROTH CML 40.2 SURFACE TREATMENT, USABLE PROCESS SPACE / ZONE  length: 50 mm  diameter: 700 mmELECTRICAL SPECIFICATIONS  total power consumption: 100 kWThe machine processes workpieces with an outer diameter of 20–50 mm and lengths between 300 and 700 mm. With a cycle time of approximately 20 seconds, it enables high production speeds whilst maintaining consistent quality.

Available 3/2027 after medium overhaulSiemens S840 DISO 502-axis head K4,000 rpm1,000 Nm30 kW2,000 x 8,000 mm7,000 mm2,800 mm1,100 mm2,550 mm40 tools

CNC pipe bending machine Type: CNC 65 TBRE Manufacturer: CSM Year: 2010 Maximum pipe diameter: 65 mm Steel (≈ 400 MPa): Ø 65 × 2.0 mm Stainless steel (≈ 600 MPa): Ø 65 × 1.4 mm Aluminum: Ø 65 × 3.5 mm Solid round material: Ø 30 mm Maximum bending angle: 190° Machine weight: 4400 kg In good condition, fully functional Find more here - .ucymachines/ Contact us at - sales@ucymachines

sheet width: 2000 mmplate thickness: max. 4000 mmmake: 2974 rear stop: ja foot pedal: ja degree: steuerbar weight of the machine ca.: 3,93 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Workbench, work table, assembly bench, assembly table, work table, base -Base frame: Work table tubular frame frame with mounting plates for swivel casters -Width: 1200 mm -Depth: 800 mm -Height: 720 mm -Quantity: 1x workbench available -Weight: 29 kg

Key data: 600 mm, 400 mm, 310 mm

High-quality FANUC wire EDM machine in top condition. The machine is well-maintained, ready for operation and is suitable for precise wire EDM work in tool, mould and precision machine construction. Manufacturer: FANUC Model: ROBOCUT α-1iD Type: A04B-0320-B001 #E5 Machine No.: P089D1671 Year of manufacture: 09/2008 Control: FANUC Series 310iS-WA Machine Type: CNC Wire EDM Machine X-axis: 600 mm Y-axis: 400 mm Z-axis: 310 mm U-axis: 200 mm V-axis: 200 mm Rapid traverse X: 900 mm/min Rapid traverse Y: 900 mm/min Rapid traverse Z: 900 mm/min Rapid traverse U: 450 mm/min Rapid traverse V: 450 mm/min Max. workpiece weight: 1,000 kg Machine weight: 3,000 kg Mains connection: 200 V AC, 3-phase, 50/60 Hz Connected load: 13 kVA Automatic threading of the wire Processing in a full bath Suitable wire diameter: 0.10-0.30 mm Condition: Top Condition Location: Freiburg

Manufacturer: SURFIN Year 2020 Condition Used Stock number 9377 Air capacity: 26000 m³/h Internal dimensions of the machine (LxWxH): 6000 x 4000 x 2800 mm Drying up to 60 °C, Electrical connection: 24 kW, Including E1 – air supply and E2 – exhaust air; E3 – Exhaust gas discharge optional by arrangement.

Some information about the condition: Classic-3S • High-pressure pump defective (pictures attached), machine ran without any worries so far • 08.08.2023: X+Y spindles overhauled, therefore backlash-free • 07.10.2024: new U-motor installed Progress 2 • Machine functional, cuts easily at low generator levels and when finishing • Problems occur at high roughing levels because the lower gap box has a defect • 26.06.2023: X+Y spindles overhauled, therefore backlash-free • September 2024: new U-motor installed • September 2025: new stern-motor installed and timing belt renewed

CONTROLS  electronic controls ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1500 mm  space requirements -front/back-: 1250 mm  total height: 2100 mm- Polishing cell C710 (1970 houres in production)Equipment of the machine:Collaborative UR3 e-series robot with intuitive HMIAutomatic compensation for tool wearPolishing station Crevoisier C5100 (drive polishing tools)Spindle for holding standard Crevoisier colletsIntegrated suction with 14m/sRenishaw measuring probe for position detectionPalletizing for approx. 40 STK 2 Pal.Two polishing paste dispensers with a capacity of three liters each

Workbench, work table, assembly bench, assembly table, worktable, wooden workbench table, aluminum workbench table -Workbench: Workbench table with drawers / solid construction, height adjustable -Width: 2000 mm -Depth: 800 mm -Height: 760 mm, adjustable, see photos -Weight: 74 kg

Max. bar length: 1400mm, bar diameter: 6.35-80mm, weight: 450kg, accessories: cabling, servo amp, bar pusher 52D=12, bar pusher 52D=15, bar pusher 52D=21, with delivery note, copy of the invoice, various manuals, operating and maintenance instructions. An on-site inspection is possible.

A two-station tube deburring machine is offered. Tube diameter: 8mm. Processing stations: 2. Including deburring tools and control cabinet. An on-site inspection is possible.

Technical data: Manufacturer: Keyence Type: XM-C1000 Series 3D Projector Control: Keyence Measuring range: 600 x 300 x 200 mm Smallest display unit: 1 μm Smallest angle: 0.0001° Table load: max. 25 kg individual components 3D Manufacturing Probe: XM-P2000 Coordinate Measuring Machine| XM-C1000 3D Fabrication Measurement System Monitor: XM-M1200 3D Manufacturing Metrology Control Unit PC: XM-1600 Model RO66-55 3D Manufacturing Measurement System Camera and Table: XM-S1200 Condition Condition: Used Functional: tested and fully functional Other equipment and accessories included: incl. mobile tool trolley incl. per original packaging box

A CNC sinker EDM machine is offered. Travels X/Y/Z: approx. 565mm/400mm/415mm, table size: 840mm/600mm, max. workpiece weight: approx. 1000kg, max. dielectric fluid level above the table: approx. 360mm. Machine dimensions X/Y/Z: approx. 1110mm/1840mm/2780mm, machine weight: approx. 2750kg. An on-site inspection is possible.