other metal working machines used for sale (10,923)

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1500 mmwidth: 1000 mmweight of the machine ca.: 0,9 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

elektrische achteraanslag elektrische diepteregeling amada tooling opname bovenaan Buigvoorbeeld: 10 mm over een lengte van 3 meterCapacity: 160 ton x 3100 mm Backgauge: elec Max stroke: 300 mm Depth of throat: 340 mm Table width: 200 mm Length: 3400 mm Depth: 2000 mm Height: 2600 mm Weight: 8 ton Capacity: 160 ton Bending length: 3100 mm

Bekamak BMSY-440DGHDepth of throat: 610 mm Max height of workpiece: 440 mm Sawspeed: 15 > 120 m/min Length of band saw: 5200 x 34 x 1,1 mm Power needed: 3 kW Length : 2800 mm Depth : 1210 mm Height: 1870 mm Weight: 1540 kg

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, milling holder, milling tool, long milling arbor, attachment holder, cutter head holder, cutter head holder -Milling chuck: SK40 chuck, 3 pieces -Type: 40x16x63 TGL 30 1359 -Hole: Ø 16 mm -Dimensions: 203/60/55 mm -Weight: 1.2 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, quick-change thread cutting chuck -Manufacturer: Bilz, Thread cutting chuck, quick-change thread cutting chuck, 3 pieces -Type: WFLK 115 B TR 28X2 -Submission/Price: complete -Transport dimensions: 120/40/H135 mm -Weight: 1.9 kg

Tool holder, milling chuck, collet chuck, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Tool holder: Adjusting sleeves Ø28 mm 9 pieces -Recording: 5x MK2 / 4x MK1 -Submission/Price: complete -Transport dimensions: 200/90/H120 mm -Total weight: 3.6 kg

The machine is in good technical condition; it can be tested by prior arrangement.

Measuring range width/ length/ height 1600/ 1800/ 1000 mm Dimensions Width/ Length/ Height 2450/ 2940/ 3800 mm max. workpiece weight 3500 kg Measuring machine weight 8500 kg Creep speed 0 - 5 mm/s Setup operation 0 - 70 mm/s Series measurement operation Axis max. 300 mm/s Vector max. 425 mm/s Software version Calybso 2023/ Service Pack 2 --- version 7.6.08 Various probes Transducer

Laser cutting machine Trumpf Trumatic L 4030

Usable furnace width: 600mm, usable furnace height: 310mm, clear passage height: 350mm, furnace zone length: 3500mm, number of heating zones: 3, radiant tube control: On/Off, radiant tube monitoring: via UV cell, max. temperature: 1050°C, operating temperature: approx. 800-1000°C, material processed: transformer and slit-strip cores, net/gross throughput: 750/860kg/h, max. grate load: 250kg, permissible grate weight: 50kg, cycle time per grate: approx. 20min, heating, equalizing, holding: approx. 850°C, approx. 120min, cooling: from approx. 850°C to below approx. 200°C in approx. 180min, number of grates: inlet lock: 1, annealing furnace: 6, furnace neck: 1, cooling section: 9, outlet lock: 0, grate return transport (buffer): 18, grate width: 600mm, grate length: 600mm, grate height: 60mm, overall grate height: 210mm, frame height: 150mm, weight per grate: approx. 50kg, annealing fu ...

A Bosch OBD 10/53L 12 and a Bosch OBD 15/54L 17 are available, strip width: 250mm, usable height: 260mm, number of furnace doors: 3, doors: inlet, intermediate and outlet door, strip speed: 1.8m/min, cycle time: 25min, cycle distance: 700mm, operating temperature of decarburizing zone: 760°C, operating temperature of bluing zone: 550°C, heating capacity of decarburizing zone: 84kW, heating capacity of bluing zone: 18kW, evaporator heating capacity: 3kW, evaporator water consumption: approx. 0.5l distilled water/h, energy consumption: approx. 45kWh/100kg net weight, total decarburizing time: 150min, cycle time: 25min, cycles in the decarburizing zone: 6, decarburizing zone temperature: 760°C, holding time: 30min, propane/air ratio for protective gas generation: 1:18, protective gas quantity: approx. 35Nm³/h, propane quantity: 2Nm³/h, air quantity: 36Nm³/h, combustion tower temperatu ...

dimensions:: innen 1160 x 870 x 850 mmAir consumption: 400 - 800 l/min.air pressure: 3,4 - 8,0 barworkpiece weight: max. 150 kgtotal power requirement: 1,2 kWweight: 160 kgrange L-W-H: 1320 x 1200 x 1760 mmFurnishing:- Very large front flap that opens upwards- Suitable for various blasting materials e.g. quartz, glass ball, plastic ball, etc.- Integrated suction system with exchangeable air filter- Jet gun without a finger trigger The air flow is controlled by a foot pedal- Four fluorescent tubes (230 volts) in a separate housing with protective screen and exchangeable protective film- Switch for suction and cabin lighting Regulation of the working pressure via pressure regulator with manometer- Jet head (grain size 0.125 - 0.42 mm can be used)- Cross struts on the feet easy transport with the pallet truck- Container for blasting material- dust extraction- foot switch- Operating instruct ...

width of the strips: mmband length: mmband speed: m/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10 barliter capacity: 2,71 m³ / minmotor speeds:: 3000 U/mindimensions: 1300 x 1000 x 1900 mmtotal power requirement: 18,5 kWweight of the machine ca.: 500 kgFeatures:- Focus Control 2.0 control system- Network pressure sensor- Belt-driven drive system- SoundproofedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 150x1750 mmspeed: 15/30 m/s: 83 dBengine output: 1,27/1,7 kWweight: 145 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmburner heads: 1 Control: CNC workpiece weight: 900 kgtraversing speed: 91 m/mindimensions of the machine ca.: 5562 x 2270 x 2388 mmLaser cutting machine with manual shuttle tableConfiguration1. BodorPower laser source 6 kW2. Bodor Genius laser cutting head with autofocus3. Bodor Thinker 3.0 control system4. Bed made of tenon and mortise structure5. Bodor servo motor and driver6. Nitrogen control valve7. Bodor Lightning perforation technology8. Automatic layout of residual material9. 21.5-inch monitor with touch function10. Automatic adjustment of cutting gas pressure11. Active anti-collision function12. Intelligent vibration protection13. Anti-burn mineral casting14. Bodor Mango® Ergonomic Remote Control15. Gas-saving nozzles with stable flow16. Intelligent maintenance reminder17. WIFI internet connection18. Water cooling19. Extraction system20.  ...

total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 430 mmtable width: 300 mmx-travel: 260 mmy-travel: 160 mmz-travel: 300 mmweight of the machine ca.: 0,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

groove width: mmx-travel: 1000 mmthroat: mmtable length: 1300 mmtable width: 300 mmtotal power requirement: 14 kWweight of the machine ca.: 3.2 trequired space: 2.9x3.1x2.7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 2000 mmwidth: 1000 mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

movement of X-axis: 500 mmmovement of Y-axis: 350 mmvert. movement Z-axis: 256 mmworkpiece weight max.: 800 kgweight of the machine ca.: 4.5 t: +/- 70 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.