other metal working machines used for sale (10,915)

Inv. Num. : 9172 Type: EDNC 65 Producer: MAKINO Created: 1998 Parameters: Max. travel length of the X-axis: 650 mm Max. travel length of the Y-axis: 450 mm Max. travel length of the Z-axis: 350 mm Maximum electrode weight: 100 kg

This PROFILATOR VF-320-L was manufactured in 2015. A Modular Gear Machining Center, it features a flexible system for dry machining with multiple process modules tailored to specific needs. Key features include programmable synchronization, modular design, and suitability for dry machining. Ideal for automotive gearbox components and high-precision gear components. If you are looking to get high-quality gear machining capabilities, consider the PROFILATOR VF-320-L machine we have for sale. Contact us for more information.

Manufacturer: Traub Model: TNK 36 Year of Manufacture: 2003 Operating Hours: approx. 124,705 h (as of May 2026) Total Connected Power: 33 kW Voltage: 400 V / 50 Hz Condition: No known defects. Available for live demonstration. CNC Control - Control: TX8i (64-bit) - Screen: 10.4 inch flat panel display - Interface: V24 RS232 in control cabinet - MDE Interface: Machine running / piece counter - Tool monitoring included - Thread cutting without compensation chuck - Programming: At machine control or via WinFlex IPS software on PC Main Spindle - Spindle Bar Capacity: 36 mm - Max. Speed: 6,300 rpm - Drive Power: AC 6.7 / 10.7 kW - C-axis included - Hainbuch collet chuck system (manual change device included) Counter Spindle - Motor spindle with C-axis - Counter-clamping pressure device - Workpiece ejector - Hainbuch Axfix collet chuck - Upper tool carrier with driven tools and ele ...

Manufacturer: Perndorfer Model: WSS5020/1HD18 5/1ASK Year of Manufacture: 2011 Operating Voltage: 400 VAC Frequency: 50 Hz Back-up Fuse: max. 40 A Control Voltage: 24 VDC BHDT High-Pressure Intensifier - Manufacturer: BHDT - Type: Intensifier - Max. Working Pressure: 400 MPa (4,000 bar) - Max. Flow Rate: 3.8 l/min - Manufacturing Week/Year: 47 / 2011 NOT IN WORKING CONDITION / 100 HOURS ON METER Find more here - .ucymachines/ Contact us at - sales@ucymachines

Clamping plate, plate field, welding table, welding table, clamping plate, scribing and measuring plate, measuring table, straightening plate, short-stroke heavy-duty cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine bending/straightening press -Mounting plate: Mounting plate with straightening press -Length: 4025 mm -Width: 1990 mm -Stamp diameter: 63 mm -Stroke: 110 mm -Lifting capacity: 20 t -Overall dimensions: 1990/4025/H1920 mm -Weight: 5060 kg

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Material: Cast iron -Quantity: 16x mounting cubes available Price: per piece -Dimensions: 500/700/H500 mm -Weight: 277 kg

power capacity: kWfeed pressure: 10 barvolume capacity: 5,0 m³/mintotal power requirement: 7,5 kWweight of the machine ca.: 0,4 kgScrew Compressor- Operating hours (readout): 17,442 / 22,500- Sound-dampening enclosureThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3 assen: Y1 / Y2 / X Amada bomberingCapacity: 100 ton x 3100 mm Backgauge: CNC Control: EMA Passage between uprights: 2600 mm Max stroke: 105 mm Max distance between table -- ram: 370 mm Depth of throat: 400 mm Table width: 90 mm Locking speed: 85 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 10 kW Length: 3640 mm Depth: 2210 mm Height: 2340 mm Weight: 6,5 ton

This 5-axis Brother HS-70A wire EDM machine was manufactured in 2003. It features a CNC-A50 control, working strokes of 410 x 260 x 170 mm, and can handle workpieces up to 350 kg. The wire diameter ranges from 0.1 to 0.3 mm, supporting precise cutting. If you are looking to get high-quality EDM capabilities, consider the Brother HS-70A machine we have for sale. Contact us for more information about this machine.

Schuster VTM 350 Year of manufacture 2005 see pdf on the for specifictions The machine is in working, good condition The 2005 Schuster VTM 350 is a vertical turning lathe designed for precision machining of medium-sized components. This machine integrates advanced features to enhance productivity and accuracy in various industrial applications. Key Specifications: - Maximum Turning Diameter: 200 mm - Maximum Workpiece Height: 350 mm - X-Axis Travel: 200 mm - Z-Axis Travel: 400 mm - Spindle Speed: Up to 8,000 rpm - Tool Turrets: Two turrets, each accommodating 12 tools - Spindle Motor Power: 20 kW - Machine Dimensions (L x W x H): 3,000 mm x 1,700 mm x 3,350 mm - Machine Weight: Approximately 6,000 kg Features: - CNC Control System: Equipped with the Rexroth Indramat System 200 BTV 20, providing precise control over machining operations. - Stepless Feed Rates: Allows feed rates u ...

Futureline 650 2004 Stama MC 021 + Fanuc Robodrill Year of manufacture 09/2004 The machine is in working, good condition The 2004 Stama MC 021 is a vertical machining center equipped with a Fanuc Robodrill system, designed for high-speed, precision milling and drilling operations. This machine is integrated into the Schuster Futureline 650 production line, enhancing its automation capabilities for efficient manufacturing processes. Key Specifications: - Model: Stama MC 021 - Year of Manufacture: 2004 - Control System: Fanuc 16i-MB CNC - Axis Travels: - X-axis: 500 mm - Y-axis: 400 mm - Z-axis: 330 mm - Table Dimensions: 650 mm x 400 mm - Maximum Table Load: 250 kg - Spindle: - Taper: SK 30 - Speed: Up to 20,000 rpm - Motor Power: 7.5 kW - Tool Magazine Capacity: 21 tools - Additional Features: - Integrated chip conveyor - Cooling through spindle (IKZ) - Optional NC dividing head for ...

Hello

Machine very well maintained, operating in a clean workshop and used for small-series production. Hard drive recently replaced. Inspection possible.

Stabilized Courses X 350 Y 250 Z 300 Table 500 x 400 mm. Maximum part size to be machined 790 x 530 x 275 mm. Workpiece basin dimensions 790 x 530 x 350 mm. Linear guides. Maximum workpiece weight 500 kg. 80 A ISPG generator ITS HEAD AXIS C 16 ELECTRODE CHANGER with MINI 32 system. 410 liters dielectric tank.

Small manual machine

Used industrial machine offered by IBEXTRA.

Used industrial machine offered by IBEXTRA.

This 5-axis +GF+ AgieCharmilles AGIECUT PROGRESS V4 was manufactured in 2007. It features a maximum workpiece dimension of 1,300 mm x 1,000 mm x 510 mm and can handle a maximum workpiece weight of 3,000 kg. The machine offers impressive axis travels, including X-axis travel of 800 mm and Y-axis travel of 550 mm. If you are looking to get high-quality wire EDM capabilities, consider the +GF+ AgieCharmilles AGIECUT PROGRESS V4 machine we have for sale. Contact us for further details.

CNC milling machine Type: EMCOMAT FB-450 MC Manufacturer: EMCO Year: 2019 Control: Siemens Sinumerik 828D X: 450 mm Y: 350 mm Z: 400 mm Table size: 800 × 400 mm Maximum table load: 300 kg Spindle-table distance: 230 – 630 mm Rapid traverse X/Y/Z: 5000 mm/min Working feed: 10 – 2000 mm/min continuously Spindle speed: 10 – 5000 rpm Main motor power: 10 kW Tool clamping: SK40 Horizontal and vertical milling Vertical head tiltable by ±90° Dimensions: 1980 × 2030 × 1990 mm Machine weight: 2270 kg In good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Material: Cast iron -Quantity: 5x mounting cubes available -Price: per piece -Dimensions: 510/810/H510 mm -Weight: 746 kg

Bezel, setting stick, lynette -Max. passage: Ø 320 mm -Peak height: 315 mm -Technical drawing: see photos -Dimensions: 100/420/H600 mm -Weight: 33.7 kg

Offered is a precision sheet metal straightening machine. Material width: 1500mm, material thickness: 1-2mm, suitable for: aluminum, control: Siemens Simatic OP177B. Equipped with roller conveyor discharge frame. Additionally available spare parts: Siemens Control Unit 24V DC (6SL3040-1NB00-0AA0), Siemens compact asynchronous motor 15kW (1PH7133-2DF02-0BA0), Siemens synchronous servo motor (1FK7042-5AK71-1KG0), Siemens Sinamics Basic Line Module (6SL3130-1TE22-0AA0), Siemens Simatic Panel OP177B, INA cam rollers. Weight: approx. 6700kg, overall dimensions X/Y/Z: approx. 2400mm/1600mm/1800mm. Inspection possible by arrangement.

Bombled Paris 2500 x 3 mm

LVD MVN 3100 x 4 mmCutting length: 3100 mm Max sheet thickness st 45: 4 mm Depth of throat: 100 mm Strokes/min: 20 > 70 str/min Adjustable cuttingedge: 0.5 to 1.5° Electric motor (power): 15 hp Length: 3720 mm Depth: 1415 mm Height: 1830 mm Weight: 4500 kg

Rated temperature: 1100°C Usable dimensions (WxDxH): 200 x 300 x 150 mm electr. Connection: 230 V, 1.4 kW Heating time: 100 min. Footprint: 752 x 576 x 700 mm Weight: 78 kg

Offered is a continuous parts cleaning system for metal parts. Control system: conventional. Equipped with conveyor belt, integrated filter and pump units, control cabinet, steam damage extraction blower. Weight: approx. 1800kg, overall dimensions X/Y/Z: approx. 4500mm/1600mm/2100mm. Inspection possible by arrangement.