sheet metal working used for sale (3,319)

Release Station 1: Max. sheet thickness: 6 mm steel, 4 mm stainless steel Fixed 90 degree angle with stops Knife length 225 mm Station 2 Incision: Max. cutting width: in one cut 25 mm at 100 mm cutting depth Max. sheet thickness: 4 mm steel Weight: 800 kg

Key data: 1020 mm, 3 mm

Max. bending length: 1020 mm Max. sheet thickness: 3.5 mm steel Bending rail ground Weight: approx. 1000 kg

pressure: 125 tchamfer lenght: 3550 mmdistance between columns: 3050 mmstroke: 250 mmtable width: 120 mmtable height: 900 mmcolumn arm: 320 mmreturn speed: 100 mm/secworking feed: 10 mm/seccontrol: Cybelec DNC 70 quantity of oil: ca. 250 ltotal power requirement: 11 kWweight of the machine ca.: 11 tdimensions of the machine ca.: 4 x 2 x 3 m new control Cybelec CypTouch 12 - 3 axes Hydraulic tool clamp Crowning Swivel control, right front free-moving foot control lateral protective device (protective grille) rear protective device (protective grille)Machine is available in about 1-2 months The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 6,0 mmdistance between columns: 3000 mmcutting angle: 0,5 - 3 °no. of strokes: 9 / 14 Hub/mindown holder: 18 total power requirement: 10 kWweight of the machine ca.: 4800 kgdimensions of the machine ca.: 3750 x 1600 x 1650 mmFeatures:- Hydraulic / slide-guided sheet metal guillotine shears- Electric backgauge 10-750 mm- Electric cutting angle adjustment- Manual cutting gap adjustment- 1x side stop- Front finger guard- Foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3060 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmdistance between columns: 3100 mmdown holder: 16 Stückno. of strokes: max. 10 - 15 Hub/minoil volume: 160 ltr.cutting angle: 1.6 °back stop - adjustable: 6.0 - 750 mmControl: ELGO P9521 total power requirement: 18.5 kWweight: 6300 kgrange L-W-H: 3900 x 2300 x 1630 mmFeatures:- Robust electro-hydraulic swing beam shear- ELGO digital display model P9521, for electric backgauge Backgauge travel X = 750 mm Backgauge-free ball screw drive Travel speed 100 mm/s- 1x stable side stop With T-slot, flip-stop, and millimeter scale- 2x stable front support arms- Electric cutting length limiter Cutting length limiter to increase the stroke rate/min.- Manual cutting gap adjustment Centrally operated on the right side stand- Front support plates- Front finger/interference guard- Inching operation with push buttons on the left c ...

Offered is a hydraulic punching machine: Punching force: 100tons (Tm), max. punching cross-section: 2350mm², punching capacity (standard): Ø50mm at 15mm material thickness, punching depth: 500-800mm, incl. special accessories: round punch: max. Ø80mm at 9mm, max. Ø100mm at 7.5mm, square punch: 50mm at 12mm, 60mm at 9.5mm, 70mm at 8mm, rectangular punch: max. 90 x 25mm at 10mm. Inspection possible by appointment.

The MAXPRO200® plasma cutting system achieves impressive cutting speeds, consistent cutting quality and an exceptional service life of the wear parts in air or oxygen plasma gas. The optimal cutting parameters are automatically set and controlled in one step to simplify operation even more. Designed for mechanized and manual cutting and gouging at high loads and stresses, the MAXPRO200 delivers reliable performance across a wide range of industrial applications. The package offered here consists of: 1. SWIFT-CUT CNC FLAME CUTTING TABLE 1-a. Control Console 1-b. Software 1-c. Cutting table with gantry guide 2. HYPERTHERM MACHINE BURNER 2-a. Hypertherm MaxPro200 2-b. MaxPro200 Wear Parts Kit 3. MACHINE OPTIONS 3-a. Swift-Mark Marking System 3-b. Original Equipment Kit 3-c. LAN port

Offer 26091 Technical data: - Max. working width 3200 mm - max. material thickness at 40 kp / mm² strength 2.5 mm - Bending angle adjustment electronically pre-selectable 0 - 180 ° - Operation via hand or foot switch - Largest opening width / stroke of the upper beam 200 mm - Height adjustability - bending beam 80 mm - the lower beam 90 mm - Upper bolster drive approx. 400 V / 1.8 kW - Bending beam drive approx. 400 V / 2.6 kW - Space requirement approx. W 4200 x H 1550 x D 2200 mm - Weight approx. 3800 kg

Offer 26093 Technical data: - Max. cutting length 3050 mm - Max. material thickness at 40 kg/mm², strength 2.5 mm - Cutting gap adjustment - Cutting angle 1°35 - Strokes 50 1/min - Stand projection 100 mm - Table height approx. 750 mm - Front angle stop 850 mm - 2 pieces support arms 500 mm - man. Backgauge can be operated from the front 5 - 750 mm - Sheet metal holding pneum. Supports - E – Footswitch - Drive 400 V / 5.5 kW - Space requirement approx. W 3800 x H 1500 x D 1400 mm - Weight approx. 2900 kg

sheet width: 1270 mmplate thickness: max. 4,5 mm: 4 mmroll diameter: 120 mmroll speed: 8 U/minmin. bending diameter: 180 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1250 kgdimensions: 2470 x 750 x 1000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 10 mmcontrol: Elgo 87 P2 : 11 - 31 Hub/mincutting angle adjustment: 1 - 4 °Number of hold downs: 16 Stück: 900 kg: 11 kWtable width: 700 mmtable height: 800 mmrange L-W-H: 4000 x 2220 x 1830 mmweight: 6300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 6 mmrear stop: 1000 mmcutting angle: 0,5 - 3 °down holder: 18 Stkno. of strokes: 9-17 Hub/mintotal power requirement: 7,5 kWdimensions of the machine ca.: 3800 x 2000 x 1600 mmweight: 4500 kgEquipment:- electric backgauge- electric cutting angle adjustment- manual cutting gap adjustment- SP 9 control unit- Safety guard behind the machine incl. light barrier- front finger guard- 1x side stop- operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 6 mmrear stop: 1000 mmcutting angle: 1,2 °down holder: 14 Stkno. of strokes: 18 Hub/minoil volume: 150 ltotal power requirement: 11 kWdimensions of the machine ca.: 3900 x 1900 x 1600 mmweight: 5500 kgEquipment:- Hydraulic swing cut shears- ELGO control system- Electric backgauge 1000 mm- Manual cutting gap adjustment- Cutting length limitation- Ball rollers in the table- 2x front support arms- 1x front side stop with scale- Front finger guard, hinged- Rear safety device (protective grille + light barrier)- Foot switch- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 16 mmdistance between columns: 3100 mmno. of strokes: 16 Hub/minback stop - adjustable: 10 - 1000 mmcutting angle: 0,5 - 2,5 °down holder: 13 Stückoil volume: 300 ltotal power requirement: 22 kWweight: 14000 kgdimensions: 4100 x 2300 x 2000 mmFeatures:- Electro-hydraulic slide-guided sheet metal shear- With ELGO P9724 NC digital control unit Input of target/actual values from the backgauge possible Digital display- Electro-hydraulic cutting angle adjustment- Electro-hydraulic cutting gap adjustment- Front finger guard- 1x sturdy side stop, with T-slot & mm scale- 3x front support arms- Hydraulic sheet metal hold-down- 2x emergency stop buttons at the front- Rear safety guard (protective grille)- Original operating manual Special accessories included:- Backgauge system conveyor belt with pneumatic sheet metal holding device Conveyor belt with pneuma ...

material width: 650 mmcoil weight: 15 tmaterial thickness: 16 mmThe year of construction is estimated, the system is as good as newThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 9052 Type: OmniMat L 5000 Producer: Messer Created: 2012 Parameters: Work table length: 6000 mm Work table width: 3000 mm Maximum sheet thickness when cutting: 80 mm Maximum sheet thickness when cutting (stainless steel): 45 mm Maximum sheet thickness when cutting (aluminium): 40 mm Maximum thickness of cut sheet (carbon steel): 50mm Plasma source: HPR 400 XD Machine weight: 2250 kg

Offer 26017 Technical data: - Max. projection 250 mm - Working depth 217 mm - Roller center distance 80 mm - Max. material thickness at 40 kg/mm² strength 1.75 mm - Working speed infinitely adjustable - Right + Left Rotation - Drive 400 V 1.1 / 1.4 kW - Space requirement approx. W 500 x H 1450 x D 655 mm - Weight approx. 250 kg - with: - E - foot switch - Roller sets - Anchor apron

Technical data Press force approx. 3200 k Bending length approx. 4420 mm TASC 6000 control system Projection 420 mm Free stand passage approx. 3680 mm Usable installation height approx. 615 mm Weight machine approx. 23400 kg Facilities - Stable machine frame press beam, stress-relieved annealed with high bending strength - Spherical bearing of the press beam (inclined position)- Electro-hydraulic upper drive with 4-cylinder technology - Optical set-up and positioning aid - Generous edge clearance - Flat Front Cover Narrow Block Hydraulic Electronic Pressure Compensator - Measuring system with glass scale and suspension compensation - Hydraulic oil in the machine (lifetime lubrication)- Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Extended equipment - 6-axis backgauge system - Hydraulic upper tool clamping - CNC crown ...

TOOLMET GATO GC-G-M-2040 oxy-fuel cutting machine was built in 2020 in Poland by Toolmet Sp. z o.o. This extremely efficient machine is an excellent choice for businesses placing emphasis on high accuracy and repeatability of the produced parts. It enables precise, 4-axis shape cutting of workpieces made of thick steel sheets. The machining process is performed fully automatically by means of a reliable gas torch according to pre-programmed cutting programmes. The work table with a length of 4000 mm and width of 2000 mm is equipped with a sectional extraction system with 6 pneumatically controlled sections. This solution effectively eliminates any contamination generated during the cutting process, ensuring a high level of safety and great user comfort. In order to guarantee smooth movements and high positioning accuracy, a lubrication-free drive system and powerful servo motors in all l ...

pressure: 36.0 tstroke: 250 mmflat steel: 200 x 10 mmworking feed: 6.0 - 24.0 mm/minreturn speed: 60.0 mm/minwork height max.: 900 mmtable:: 580 x 1170 mmtotal power requirement: 4.1 kWmotor: 400 Volt 50 Hzoil volume: 60.0 ltr.weight: 1100 kgrange L-W-H: 680 x 1170 x 1130 mm Current list price approx. € 28.000 Special price on requestFeatures:- Electro-hydraulic horizontal bending machine- Large, robust machine table made of hardened steel- Machine made of hardened and ground forged steel- Digital display for stroke setting- Several/various bending tools- Infinitely variable adjustment of bending speed and pressing force- 1x freely movable double foot switch- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydropneumatic mode of operation Punching force: 50 kN Working stroke: 35 mm Projection: 110 mm Installation height: 140 mm

Max. cutting length: 2040 mm Max. sheet thickness: 2 mm steel Manual backgauge up to 500 mm Side stop and table extensions Knife sharpened 1900 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 50 mm -Load capacity: 4500 kg -Weight: 31 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 30 mm -Load capacity: 3000 kg -Number: 2x terminals available -Price: per piece -Weight: 14 kg/piece

Separating tool, punching tool, punch, punching die, punching punch, gill forming tool-Punching tool for: holding matrices-Bore diameter: 70 mm-Dimensions: 220/317/H115 mm-Weight: 32 kg

sheet width: 1250 mmplate thickness: 10 mmnumber of rolls: 21 Stückroll diameter: 80 mmband speed: 12 m/minstraightening cross-section: 5700 mm²Control: total power requirement: 60 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area: 3000 x 1500 mm: 5000 W: 25 mmsheet thickness for stainless steel: 20 mmSheet thickness aluminum: 12 mmmachine weight ab.: 12.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Ballscrews in X-Backgauge- X STroke 0 - 1000 mm- REHBERG Table rollers- Extra Heavy Duty machine for cutting 6 stainless steel- Strokes 56.325 ( 04.2026)- Full set documentation

pressure: 135 tchamfer lenght: 3050 mmdistance between columns: 2600 mmstroke of upper beam: 265 mmthroat: 450 mmdayligth: 530 mmworking feed: 10,0 mm/secajustment speed: 160 mm/secreturn speed: 100 mm/secControl: CYBELEC ModEva 10S work height max.: 900 mmtable width: 104 mmback stop - adjustable: 800 mmoil volume: 250 ltotal power requirement: 18,5 kWweight: 10900 kgrange L-W-H: 4250 x 1700 x 2850 mm from a maintenance workshop - good condition () New price ~ 84.000 eurosFurnishing:- with DELEM numerical CNC control model DA 66W 2D graphical programming automatic bending sequence calculation and collision detection high-quality color LCD screen (TFT)- pivoting control, front right- controlled axes : Y1 + Y2 + X + R + CNC crowning (WILA)- CNC electric backgauge (X axis) Travel speed 500 mm/sec.- CNC electric height adjustment (R axis) Travel speed 350 mm/sec. Travel range 250 mm- 4x man ...

Working lenght 2540 mm Material thickness max (400 N/mm²) 2.5 mm Upper beam upstroke max 280 mm Gauging system (rectangular) 6-1550 mm Gauging system (T-shape) 6-3050 mm