sheet metal working used for sale (3,311)

Offer 26300 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 12 mm - Cutting angle adjustable mot. 0,5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 18 pcs - Mot. Back gauge 10 - 1000 mm - Front angle stop - Stroke rate depending on cutting angle and cutting length 7 - 17 rpm - Hydraulic drive 400 V / 22.5 kW - Table height 770 mm - Space requirement approx. W 4100 x H 2030 x D 2030 mm - Weight approx. 8500 kg - with: - E. foot switch - Cut line illumination

Offer 26307 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustable mot. 0,5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 18 pcs - Mot. - Back gauge 10 - 750 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 9 - 17 rpm - Hydraulic drive 400 V / 7.5 kW - Table height 770 mm - Space required including back gauge, without front support arms - approx. W 3750 x H 1600 x D 1650 mm - Weight approx. 4500 kg - with: - E. - Foot - Switch - Cut line illumination

work piece width: max 145 x 150 mmband speed: 1.0 - 8.0 m/minworkpiece height: max. 100 mmtotal power requirement: ca. 5.5 kWweight of the machine ca.: 900 kg.dimensions of the machine ca.: 1560 x 870 x 1920 mmWide-Band Sander for Deburring and Rounding of Laser-Cut Parts - Includes Vacuum Work Table Description Technical Specifications: - Working width: 150 mm- Maximum workpiece height: 100 mm- Max. height adjustment: 100 mm- Complete finishing in a single pass - 1 grinding wheel - 2 disc brushes- Pressure rollers in front of and behind each unit - Adjustable feed speed- Fixed table, constant feed height - Vacuum table- Pressure of the brushes and grinding wheels adjustable . without opening the hoodINCLUDED: DD UNIT: GRINDING WHEEL FOR DEBURRING - Working width: 150 mm- Motor power: 1.1 kW - Grinding wheel diameter: 250 mm INCLUDED: 2PTB UNIT: DISC BRUSHES FOR EDGE ROUNDING - Unit  ...

3-roll hydraulic plate bending machine with pre-pinch Model MCO3034 Davi capacity 3000x20 mm -Plate width 3000 mm -Capacity rolling 20 mm -Prebend 16 mm ------- TECHNICAL DATA Top roll 340 mm Surface on the rolls 3050 mm MINIMUM ROLLING DIAMETER ID 430 MM depending on plate thickness and plate yield strength CONFIGURATION: -Rolls hardened high strength surface -Conical plate bending attachment hydraulic -Digital position readouts 2xplate support left and right side hydraulic ( see photo ) -3 rolls driven hydraulic powered with individual motor & gear box on each roll. -Parallelism between top and bottom rollers by torsion bar. -Rolls installed on bearings -Overload safety hydraulic protection of the rolls -Synchronized speed hydraulic rotation of the rolls. -Hydraulic unit self enclosed into the machine. -Speed  ...

Automatic Coil Cut-to-Length Line manufactured in 2025. This SACFORM CRL1503-6 is designed for processing aluminum, mild steel, and stainless steel with a material thickness capacity of 1-3 mm. It features a maximum coil weight of 6000 kg and a finished sheet length of 500-4000 mm. If you are looking to get high-quality cut-to-length capabilities, consider the SACFORM CRL1503-6 machine we have for sale. Contact us for further details regarding this machine.

Profile cassettes and cutting dies for a roll forming line used in the production of trapezoidal sheet profiles. Two different profiles can be produced: H = 158 mm × W = 750 mm H = 153 mm × W = 840 mm Please refer to the photos for further details. Material Capacity Aluminum and steel Material thickness: 0.75 - 1.5 mm Scope of Supply Cassette 1 for Profile 153 and 158 Cassette 2 for Profile 153 and 158 Cassette 3 for Profile 153 and 158 Cassette 4 for Profile 153 Cassette 4 for Profile 158 Cassette 5 for Profile 153 Cassette 5 for Profile 158 Cassette 6 for Profile 153 Cassette 6 for Profile 158 Cutting die for Profile 153 Cutting die for Profile 158 All tooling comes from ongoing production and is being offered for sale due to a product change within the manufacturing operation. Please note: The offer includes the profile cassettes and cutting dies onl ...

Cassettes + knives for roll forming line for the production of trapezoidal sheets. Two different profiles can be produced. H = 158 mm x W = 750 mm H = 153 mm x W = 840 mm See photos for details. Workable sheet metal : Alu + steel in 0.75 - 1.5 mm Composed of a total : - Cassette 1 for Profile 153 and 158 - Cassette 2 for Profile 153 and 158 - Cassette 3 for Profile 153 and 158 - Cassette 4 for Profile 153 - Cassette 4 for Profile 158 - Cassette 5 for Profile 153 - Cassette 5 for Profile 158 - Cassette 6 for Profile 153 - Cassette 6 for Profile 158 - Knife for profile 153 - Knife for Profile 158 Everything comes from ongoing production, the sale is due to a product change. It is only the cassettes + blades, without drives, reel, scissors, etc. Total weight : approx. 86,000 kg

Offer 26238 Technical data: - Max. working width 3190 mm - Max. material thickness at 40 kg/mm², strength 6.3 mm - Cutting angle 1.2 ° - CNC - Cutting gap adjustment - Strokes 30 to 64 1/min - Stand projection 100 mm - Table height approx. 800 mm - Number of hold-downs 16 pcs - Back gauge 5 - 1000 mm - 3 pieces front support arms 1500 mm - E – Footswitch - Rear tilting roller table - Drive 400 V / 18.5 kW - Space requirement approx. W 3900 x H 1800 x D 2100 mm - Weight approx. 6800 kg - with : - CNC control RAS system - Rear tilting roller table / sheet metal hold-up - Rollable material collection container - Electronic rear space protection / light barrier

sheet width: 1640 mmplate thickness: 3,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 1,60 tdimensions of the machine ca.: mManual and automatic bending cycles possibleBending angle adjustable via potentiometerClamping beam lift and material thickness selectable via switchesManual backgauge with spring fingersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mmplate thickness: 2,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 1,60 tdimensions of the machine ca.: mManual backgauge up to 550 mmSide gauge and table extensionsSharpened bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press brake, bending machine, swing bending machine, die bending machine -Manufacturer: LOTZE Swivel bending machine with segmented upper jaw type 1512000 3.5 -Drive: mechanical, cam control semi-automatic -Max. working width: 2000 mm -Max. sheet thickness: 3.5 mm -Max. intermediate dimension: 180/280 mm -Accessories: 12 segmented upper cheek splints, 3 upper cheek splints -Connected power: kW -Dimensions: 3350/1250/H1600 mm -Weight: kg

Max. bending length: 3240 mm Max. sheet thickness: 4 mm steel Upper beam stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Central lubrication Instruction manual

Key data: 1020 mm, 2 mm

Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Good condition Weight: 400 kg

Key data: 1640 mm, 3 mm

Max. bending length: 1640 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via switches Manual backgauge with spring fingers Weight: approx. 1600 kg

CO₂ laser cutting machine manufactured in 2006. This Prima Industrie Platino 1530 features a laser power of 4 kW, with an X-axis travel of 3,000 mm and a Y-axis travel of 1,500 mm. It includes an automatic loading system, an automatic unloading system, and a vacuum system. If you are looking to get high-quality cutting capabilities, consider the Prima Industrie Platino 1530 machine we have for sale. Contact us for further details.

Universal machine for chipless coldforming of sheet metal, pipes and profiles.Shrinking, Stretching, Doming, Planishing, Finishforming, Flattening, Straightening ECKOLD technology means precise and chipless cold forming of sheet metal, tubes and profiles with minimum noise.The same machine is used for bending profiles and forming sheet metal, for making new parts as well as for repairsand the precise correcting of parts. Available for the machines are a wide range of tools which can be mounted andchanged in a matter of seconds to suit the work in hand with the machine like FWR-1307X and  FWA-1306X this forming technology is unique throughout the world.ECKOLD Kraftformer type type KF 665 are extremely sturdy and durable. They can deliver great pressurecombined with a very sensitive control. Their high degree of versatility is due to the wide range of tools which are easyto change thus g ...

Key data: 1020 mm, 1 mm

used RAS 3-roll round bending machine, with wire inserts, seam groove, transmission gear, Adjustment of the rear roller from the front with scale, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 1020 mm Sheet thickness max. steel 1.25 mm Farbe/Colour grün Weight/Weight 150 kg Dimensions 1300 x 600 x 1100 mm Number of round rollers 3 pieces Roller diameter 56 mm Machine number: 316/10

Key data: 2020 mm, 1 mm

used Teko manual bending machine Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 2020 mm Sheet thickness steel: 1.25 mm Sheet thickness aluminium: 2.00 mm Sheet thickness front: 0.70 mm Colour: green Dimensions: 630 x 660 x 1155 mm Machine weight: 220 kg Upper beam stroke: 140 mm without roller scissors Bending angle (max.): 120 degrees Machine number: 163/141

Key data: 1030 mm

with wire inserts, conical rounds, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 1030 mm Sheet thickness max. steel 0.6 mm Farbe/Colour grün Weight/Weight 220 kg Dimensions 1290 x 600 x 1050 mm Lower roller diameter 40 mm Top roller diameter 40 mm Number of round rollers 3 pieces Machine number 169

cutting length: 2500 mmplate thickness: 3 mmdistance between columns: 2050 mmblade length: 2650 mmtotal power requirement: 3 kWweight of the machine ca.: 2,5 t- The scissors are equipped with an adjustable stop on the back. stop. Each side is equipped with a millimetre counter, so that the guarantee that the cuts are true to size.- Spring-loaded automatic hold-downs prevent the material from shifting during the cutting process. material during the cutting process.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 6080 mmplate thickness: 6.0 mmrear stop: 1000 mmcutting angle: 0.5 - 2.0 °down holder: 29 Stkno. of strokes: ca. 10 Hub/mintotal power requirement: 22.0 kWdimensions of the machine ca.: 7300 x 2150 x 2750 mmweight: 25500 kg Current list price: approx. 150.000 eurosFeatures:- Electro-hydraulic, slide-guided sheet metal shear- Electro-hydraulic cutting angle adjustment- Electro-hydraulic cutting gap adjustment- Electrically driven backgauge with ball screws- Manual central lubrication- Cut line illumination- Ball bearings in the table- Fold-up finger guard, 1.000 mm- Side stop with T-slots, tilting stop, and scale- 5 support arms with T-slots- Photoelectric sensors on the rear of the machine- 1 freely movable foot switch Includes optional equipment:- Pneumatic sheet metal holding deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS  electronic controls OVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 200 mm  sheet thickness max.: 4.5 mm  coil weight max.: 0.5 toDECOILER  coil weight max.: 0.5 to  mandrel expansion range from: 250 mm  mandrel expansion range up to: 550 mmLEVELLER UNIT  sheet width max.: 300 mm  sheet width (min): 20 mm  sheet thickness max.: 4 mm  sheet thickness min.: 0.5 mm  material cross section max. (450 N/mm2): 800 mm²  number of leveller rolls: 7   diameter of leveller rolls: 65 mm  number of infeed-/outfeed rolls: 4   diameter of feed rolls: 65 mm  drive power: 1.5 kW  loop controls: yes ELECTRICAL SPECIFICATIONS  mains voltage: 380 V  mains frequency: 50 Hz

CNC Press Brake manufactured in 2024. This DAMAMT WC67K 63T/2500 CNC features a pressing force of 63 tons and a bending length of 2,500 mm. It includes advanced CNC control with 4+1 axes and motorized V-axis crowning for precision bending. If you are looking to get high-quality bending capabilities, consider the DAMAMT WC67K 63T/2500 CNC Press Brake we have for sale. Contact us for further details.

For sale is a high-performance DIMECO LINAPUNCH MC-F CNC coil punching line for automated processing of strip material directly from the coil. The system is particularly suitable for the cost-effective production of perforated sheets, mounting plates, mounting rails, ventilation components and customer-specific stamped parts in medium and large quantities. Direct processing from the coil significantly reduces material consumption, set-up times and unit costs. LINAPUNCH technology combines the flexibility of a CNC punching machine with the productivity of a continuous coil line. The system works with standardized thick-turret tools and enables highly productive production processes. Technical data Manufacturer: DIMECO Type: LINAPUNCH MC-F Machine Type: CNC Coil Punching Machine/Punching Line Control: CNC, Siemens Simostar 370 Coil Processing Coil inner Ø: 508/610 mm Coil out ...

Max. saw blade diameter: 500 mm Max. feed length: single 650 mm (3 fold feed possible) Pneumatic material feed Pneumatic saw feed Minimum quantity spraying device Unit counter with automatic switch-off Digital display of feed length Cutting height can be quickly adjusted via 4-stage selector switch Including chip extraction 800 kg

Max. bending capacity: 220 kN (22t) Tool height: 120 mm Weight: approx. 500 kg

- New Hydraulic hose- New Sealings- New Covers- Optional Retrofitting possible  - New Controller - New SPS - SIEMENS - Main Power 28 kW- Steel telescopic covers- CE-Safety fence with door  - Optional tooling for Parabolic 1200 mm- Old owner machined 3 mm aluminum parts - Commisioning, Training, Tool, Installation Possible