sheet metal working used for sale (3,295)

sheet width: 1020 mmplate thickness: 2,0 mmdistance between columns: 1050 mmdaylight opening: 46 mm: 135 °total power requirement: Handbetrieben weight of the machine ca.: 0,35 tdimensions of the machine ca.: 1,3 x 0,75 x 1,2 mSegment bending machine, new.Segment widths:25, 30, 35, 40, 45, 50, 75, 100, 150, 200, 270Including material stop, max 660mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1070 mmplate thickness: 4 mmdistance between columns: 1100 mmdiameter of upper rolls: 110 mmtotal power requirement: 5,0 KWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 2,0 x 0,9 x 1,1 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1070 mmplate thickness: 9.0 / 10,0 mmdistance between columns: 1070 mmdiameter of upper rolls: 190 mmpre-bending capacity: 9,0 mmconnected load: 5,3 kWweight of the machine ca.: 2,4 tdimensions of the machine ca.: 2,7 x 0,92 x 1,2 mm- Electrically adjustable rear roller- Electrically adjustable lower roll (material clamping)- Digital readout for rear roller movement- Digital readout for lower roll movement (material clamping)- Hardened rolls- Conical rolling- Swiveling top roll- Brake motor- Emergency stop- Documentation- 400VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 6400 mm, 1 mm

used Jorns double bending machine, with the following equipment: - 4 pneum. Clamping finger with short-part clamping finger - Attachment rail - Foot control - Sheet metal cassettes - Upper beam with rebate groove - Hydr. Material thickness adjustment - Clamp and angle stop (Matic) Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 6400 mm Sheet thickness max. steel 1.5 mm Sheet thickness max. aluminium 2.0 mm Sheet thickness max. VA 1.0 mm Back gauge (min.) 15 mm Back gauge (max.) 1125 mm Colour anthracite/light grey Total power requirement 20 A Dimensions 7332 x 3721 x 2040 mm Weight 9250 kg Upper beam stroke (opening width) 200 mm Bending angle (max.) 145 degrees Crowning manual without roller scissors Number of stands 5 pieces Insertion depth 1150 mm Machine number K13036

BODOR P3015 fiber laser was built in 2020 in China by Jinan Bodor CNC Machine Co.,Ltd. Distinguished by its use of the most advanced technology available on the market, the machine is the perfect choice for even the most intensive challenges. It enables the precise machining of sheet metal with a maximum length of 3000 mm and a width of 1500 mm by means of a stable 2 kW fibre optic beam. During the machining process, the cutting head with autofocus automatically adjusts the focal position depending on the thickness of the material. The nozzles, in turn, are automatically changed, calibrated and cleaned to ensure reliable operation throughout their service life. All this is completed by the 360° anti-collision system developed by BODOR, which predicts and detects any obstacles. The BODOR P 3015 fibre laser is also extremely easy to operate. The machine operator has an advanced nume ...

BODOR T230 tube and profile fiber laser was built in 2020 in China by Jinan Bodor CNC Machine Co.,Ltd. The machine, which is distinguished by its use of the state-of-the-art technology available on the market, is the best choice for even the most demanding tasks in many industries. It enables precise cutting of tubes and profiles with a square cross-section by means of a stable 1 kW fibre-optic beam. During the machining process, the cutting head with auto focus function stores the focal length values in the control system separately for each type of material. The intelligent technology developed by BODOR, in turn, reduces the piercing time by 90%, regardless of the thickness and type of material. All these solutions reduce energy consumption and the amount of cutting gas to a minimum. The T230 tube laser cutting machine is also extremely easy to operate. The machine operator has an a ...

IZAN MAKINA IZFORM IZ5 roll forming line was built in 2019 in Turkey by İzan Makina – İmalat İnşaat İç ve Dış Ticaret Limited Şirketi. This line, distinguished by the use of the state-of-the-art technology available on the market, is designed for frame constructions. Its extensive machining capabilities allow for the precise, fully automatic forming of C- and U-type cold-formed profiles of various dimensions. These elements are used, among others, in partition walls and bathroom modules. The IZAN MAKINA IZFORM IZ5 profiling machine is offered with extensive equipment, including advanced BIM software and a sheet metal decoiler with a maximum capacity of 3 tonnes. The IZAN MAKINA IZ5 rool forming machine is currently configured for the production of C75x1.2mm and C100x1.2mm profiles. The production cycle is performed by means of a reliable tool head with the following machini ...

METAL TECHNIKA EasyCut fiber laser was built in 2020 in Poland by Metal-Technika. The machine, designed to cut sheet metal with a maximum weight of 1000 kg, is an excellent choice for any industrial plant. Laser cutting is performed by a stable, 4 kW fibre optic beam, which is generated by a resonator of the highest energy efficiency. The cutting head with movable optics, in turn, ensures optimum laser beam geometry for any type of material. All this is complemented by extensive equipment, consisting of, among others, an automatic pallet exchange system and an advanced CNC control with all the necessary functions. The METAL TECHNIKA fibre laser weighs 15000 kg. Technical specifications of the METAL TECHNIKA EasyCut laser cutting machine - laser power: 4 kW - feed rate in the X/Y/Z axis: 3000/1500/160 mm - positioning speed with simultaneous operation of the X and Y axis drives: 120 ...

Profile steel shear, profile shear, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shear -Manufacturer: Mubea, hydraulic profile steel shear type HIW1000 -Drive: hydraulic -Pressure force: 100 tons -Equipment: large support table with stops for die-cutting, various stamps and dies -Production: Punching, shearing, cutting, notching -Dimensions: 2360/760/H1800 mm -Weight: 2700 kg

hollow: 1500 mmplate thickness: 0,5-50 mmPayload: 300 kg/lfmfeed stepless: 0-4 m/minControl: NC total power requirement: 33 kWweight of the machine ca.: 4.200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 35.0 tchamfer lenght: 1250 mmdistance between columns: 1095 mmstroke - stepless adjustable: 215 mmcolumn arm: 410 mmtable height: 800 mmdayligth: 455 mmworking feed: 10.0 mm/secreturn speed: 56.0 mm/secwork height max.: ca. 875 mmControl: DM 51 Number of working hours: ~ 13.300 hoil volume: 80.0 loperating pressure: max. 240 barvoltage: 380 Vtotal power requirement: 4.0 kWweight: 2500 kgrange L-W-H: 1700 x 1450 x 2250 mmFeatures:- Robust CNC-controlled hydraulic press brake- With DELEM CNC control unit DM 51” Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1+Y2 axis) Program + tool storage possible Swiveling control panel, front left- CNC electric motor-driven backgauge (X axis)- CNC electric motor-driven height adjustment of the stop (R axis)- 2x manually adjustable stop fingers- 1x split set of deer foot tools - top- 1x split set of Multi V tools ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 42400 €: 809.84 €: 2540 mm: 4.5 mm: Hydraulisch : 135 °: 3900 mm: 1700 mm: 1900 mm: 5100 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° € 45.100,--OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm € 11.400,--(sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 41200 €: 786.92 €: 2540 mm: 3.5 mm: Hydraulisch : 135 °: 3.7 kW: 3850 mm: 1700 mm: 1860 mm: 3900 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° € 42.900,--OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm € 11.400,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 19600 €: 376.32 €: 55 to: 500 mm: 5 : 40/10 bzw. 20/20 mm: 20 mm: 37 1/min: 300x15 / 200x20 mm: 10x42x90 mm: 5 kW: 2100 mm: 1160 mm: 2090 mm: 1750 kg2 foot pedals for independent work at 2 stationshydr. driveflat bar shearangle bar shear with minimum deformationby diagonal moving of the bladeround and square bar shearrectangular notching unitpunching unit up to diam. 40 mmfast hydraulic, Ankörnvorrichtungoilfillingtable at the punching station with gaugetable at the notching unit with gaugetable at the flat bar shearuser manual in GERMAN and ENGLISHOPTION:Kit € 970,00length stop 1000 mm with contact switch, for angle, flat or bar stationmagnetic machine lamp10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 182088 €: 3441.46 €: 3 kW: Wechseltisch : 16 mm: 8 mm: 8 mm: 5 mm: 8 mm: 25,4 kW: 3060 x 1525 mm: 3060 mm: 1525 mm: 125 (275) mm: 3048 x 1524 mm: 240 kg/m²: 2160 kg: 100 m/min: 100 m/min: 141 m/min: 14 m/s²: +/- 0,05 mm: +/-0,05 mm: 25 sFIBER LASER HESSE HD-FN MADE BY DURMAThe HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading.The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems.Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment.The system consists of the following components:Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems)Encapsulated cutting room with p ...

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 38900 €: 742.99 €: 64 mm: 4000 mm: 950 mm: 1250 mm: 850 kg: 10 cm³: 64 x 3,3 mm: 2 mm: 60,3 x 2,2 mm: 60 x 60 x 2 mm: 40 x 60 x 4 mm: 60 x 40 x 3 mm: 76 mm: 200 mm: 20 mm: 210 °: 4.2 kW: 15 lwith mandrel 3 m lengthFST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slideProgrammable C-axis bendingPositioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stopsMultifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu30 programs of 9 bends each can be memorizedScreen for digital display for carriage feed (Y1 Axis) and rotation (B Axis)External pressure gauges for easy setting of the system and closing pressureVariable bending speed up to 4 rpm (Inverter vers ...

: gebraucht : 1988 : 070009 : prompt, Zwischenverkauf v : Deutschland : 1600 €: 400 mm: 700 mm: 1500 mm: 2050 mm: 820 mm: 1000 mmwith brakewith 2 spare mandrelsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 42700 €: 815.57 €: 3100 mm: 2.5 mm: Hydraulisch : 135 °: 4300 mm: 1770 mm: 1890 mm: 4000 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° € 45.300,--OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm € 12.100,--(sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. hole Ø round: 25 mm max. hole Ø slotted hole: 25 x 18 mm Max. material thickness: 16 mm Punching time with AHP-M pump: 10 s Jaw depth: 10 mm Punching force: 44 t Punch stroke: 25 mm Weight: 47.3 kg

Offer 25500 Specifications: - Cutting length 3050 mm - Cutting thickness at 400 N/mm², strength 13 mm - Cutting thickness at 400 N/mm², strength up to 1000 mm, length 15 mm - Cutting angle 0.5 - 3 ° - Number of sheet hold-downs 18 pcs - Stroke rate 10 - 23 min -Mot. Back gauge up to 1000 mm - Rear area protection with light barrier - Front angle stop 1000 mm - HSLX version: - CNC control HACO SC 5 controller when entering the sheet thickness in mm -Auto. Cutting angle adjustment according to sheet thickness - Cutting length limitation -Auto. Positioning of the backgauge (8 programs – 80 sets) with - Digital display and autom. Backgauge retraction - Possibility of mot. Adjustment of the backgauge by 2 push buttons - Drive 400 V / 22 kW - E - Footswitch - Space requirement without support arms approx. W 4200 x H 2250 x D 2200 mm - ...

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Dimensions: 20 x 160 mm -Recording: 35 x 31 mm -Length: 2680 mm -Weight: 110 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 5 mm -Dimensions: 45 x 220 mm -Length: 2400 mm -Weight: 120 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 8.5 mm -Dimensions: 50 x 180 mm -Recording: 15 x 17 mm -Length: 3250 mm -Weight: 140 kg

Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 13.5 mm -Dimensions: 50 x 180 mm -Recording: 15 x 17 mm -Length: 3250 mm -Weight: 140 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90° 5/8/9/12 mm -Square: 54 x 45 mm -Length: 2550 mm -Weight: 70 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 30° 12 mm -Square: 80 x 80 mm -Length: 2500 mm -Weight: 120 kg

Long knife, sheet metal and round steel shears-Sheet metal shears: stable-Material: flat steel-Round: up to 15 mm-Square: up to 15 mm

Beading machine, flanging machine, seam closing machine, motorized beading machine -Max. Sheet metal capacity: 1.25 mm -electrically driven: 1.1 kW -Projection: 50 mm -Dimensions: 900/800 / H1100 mm -Weight: 250 kg

Electric clutch, electromagnetic clutch for guillotine shears, tin snips, tin guillotine shears, crank guillotine shears, eccentric press -for: guillotine scissors crank guillotine scissors -Equipment: clutch, transformer, control -Manufacturer: LABOD electronic -Type: GN 6 DZ.4Q.80 -Total net weight: 160 kg

Sheet metal package pallet, sheet metal traverse, sheet metal package shelf -Load capacity: 10 to -for crane/forklift operation -Dimensions: 3000/1800/H420 mm -Number: 3x available -Price: per piece -Weight per piece: 300 kg