boring mills and machining centers used for sale (3,240)

CNC Machining Center Hedelius BC 100-2500 Control: Heidenhain iTNC 530 Year of Make: 2005 Internal machine no. 59 Travels: X-axis 2,500 mm Y-axis 1,000 mm Z-axis 770 mm Clamping area 3,220 x 1,000 mm Table load: approx. 3,000 kg Mount: SK 50 Tool magazine: 30 – compartment Spindle speed: 20 - 5,000 rpm Accessories - Coolant filter system 900 l - Internal cooling - Chip conveyors - Electronic handwheel - Partition wall for pendulum machining - Magnetic plate 2x 1,000 x 800 mm - Table switch TS27R - Prepared for touch probes

380V 16 A Length 0.67 m Width 0.96 m Height 1.50 m Table

A Gebrüder Irle CNC large-format deep-hole drilling machine is available. Drilling capacity steel: 40mm, max. drilling depth: 1600mm, drill spindle adjustment: 350mm, vertical drilling unit adjustment: 700mm, power: 30kW, speed: 2940rpm, field range constant power: 1-3, armature range constant torque: 1-35, max. drill spindle torque: 1500Nm, rated speed: 163rpm, spindle flange diameter: 200mm, quill diameter: 2000mm. Feed: 500mm/min, rapid traverse: 1200mm/min, max. feed force: approx. 34.3kN, display: 0.005mm, vertical adjustment travel: 700mm, longitudinal adjustment travel: 13000mm, transverse adjustment travel: 650mm, swivel: 85°. Clamping plate dimensions X/Y/Z: 12500mm/1000mm, guide bed dimensions X/Y: 3350mm/455mm, controls: Heidenhain TNC 310. Documentation available. An on-site inspection is possible.

A compact Optimum bench column drilling machine is available. Motor power: 750W, drilling capacity steel: 25mm, continuous drilling capacity: 20mm, spindle taper: MK2, T-slots: 12mm, table dimensions X/Y: 280mm/245mm, quill stroke: 80mm, throat depth: 180mm, column diameter: 73mm, spindle to drilling table distance: 425mm, spindle to base distance: 618mm, speed: 2440rpm. Machine dimensions X/Y/Z: approx. 660mm/330mm/1020mm, weight: approx. 70kg. Without a drill chuck and drill chuck guard. Documentation available. An on-site inspection is possible.

Key data: 20 mm

0.75 KW 380 V 16 A Röhm Drill Chuck Supra 1 - 13 mm Speed 210 - 2580 rpm With substructure Length 74 cm Width 30 cm Height 98 cm

x-travel: mmy-travel: mmz-travel: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 135 mmx-travel: 950 mmdistance between columns: 1100 mmy-travel: 700 mmcross rail adjustment - vertical: 780 mmquill travel: 300 mmmax. distance between table and spindle-nose: 1000 mmtable surface area: 1100x842 mmtable load: 1500 kgspeeds: 40-2000 U/minadjustment speed: 5-1500 mm/minelectrics - voltage/frequency: 380/50 V/Hztotal power requirement: 8 kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: 3,3x2,34x2,8 mtotal power requirement: 8 kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: 3,3x2,34x2,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: POSMILL Model: E1100 Configuration: 3-axis CNC Control System: Heidenhain 530 Year of Manufacture: 2010 Find more here - / Contact us at -

Manufacturer: Deckel Maho Model: DMU 60 E Configuration: 3-axis CNC Control System: Mill Plus Year of Manufacture: 1999 Find more here - / Contact us at -

bore capacity in steel (diameter): 30 mmthroat: 275 mmbore stroke: 100 mmtaper MK: 4 MKtable-size: 420 x 340 mmfeeds: nein mm/Uturning speeds: 80 - 2000 U/mintotal power requirement: 0,9 / 1,45 KWweight of the machine ca.: 0,22 tdimensions: 0,85 x 0.6 x 1,9 mPillar drill with:- Variable spindle speed- Digital speed display- Digital depth display- Forward/reverse rotationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmthroat: 300 mmbore stroke: 140 mmtaper MK: 3 MKtable-size: 380 x 360 mmfeeds: über Handrad turning speeds: 85 - 1100 U/mintotal power requirement: 1,3 KWweight of the machine ca.: 0,27 tdimensions: 0,95 x 0,6 x 1,92 mPillar drill with:- Feed via handwheel- Spindle speeds via belt driveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmthroat: 325 mmbore stroke: 170 mmtaper MK: 4 MKtable-size: 570 x 480 mmfeeds: 0,1 - 0,16 - 0,25 mm/Uturning speeds: 60 - 1600 U/mintotal power requirement: 2,9 KWweight of the machine ca.: 0,65 tdimensions: 1,2 x 0,8 x 2,15 mPillar drilling machine with:- Feed- Variable spindle speed- Coolant pump- Machine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Nominal drilling depth 750 mm Full drilling in steel approx. 30 mm Spindle speed max. 5700 min-1 Clamping table 1280 x 420 mm Transverse Sliding Table Coolant tank Miscellaneous Accessories

Control Mitsubishi 64S Travel Distances X/Y/Z 600 x 400 x 460 mm Table size 700 x 410 mm Table load 250 kg Spindle speed 12,000 min-1 Tool magazine for 24 Wkz. BT 40 IKZ 20 bar Suction Chip conveyor

The machine is in good technical condition, after prior agreement it is possible to test it. Matrix NEXUS 2- control system Pallets 2x YES. Chip conveyor Yes ATC- YES High pressure 70 Bar Spindle 10 125 hours •Total machine start-up 32 348 hours Pallet 630 × 630 mm Number of pallets 2 Max. workpiece size Ø 1050 × 1300 mm Max. pallet load 1500 kg X travel 1050 mm Y travel 900 mm Z travel 980 mm 4th axis Yes (NC rotary table) Spindle taper BT50 / CAT50 Spindle speed 8000 rpm (standard) Optional speed 10,000 rpm Spindle power approx. 37 kW Tool magazine 40–120 positions Control system Mazatrol Matrix Nexus 2 Production type Production series machining Typical applications Cabinets, cast iron, steel, automotive Machine weight approx. 20–22 t Automatic pallet change Yes

The machine is in good technical condition, after prior agreement it is possible to test it. 0 Baumuller ball screws, spindle diameter 60 mm, SK 40, power 5.5kw/11 kW, torque 100Nm. Rotary tool changer 12. 3 axes and 4th axis only control board without 4th axis table..

The machine is in good technical condition, after prior agreement it is possible to test it. CONTROL SYSTEM Control language - completely in Czech 3D simulation - yes Programming type - Dialogue and NC TABLE Table dimensions - 1,270 x 610 mm T-slots - 5 x 18 mm Max. table load - 1,350 kg Distance between the spindle face and the table - 150 - 760 mm TRAVELS X-axis - 1,070 mm Y-axis - 610 mm Z-axis - 610 mm SPINDLE Max. spindle speed - 12,000 rpm Spindle taper - SK40 TOOL MAGAZINE Number of tools - 24 Max. tool diameter - 80 mm Max. tool weight - 7 kg

: 40 mmthreading in St 60: M24 threading in GG 20: M30 Short spindle: MK 3 Center of spindle to wall or column: 293 mmspindle turning speed - stepless: 160 - 2250 U/minColumn diameter: 115 mmspindle stroke: 120 mmMachine table - usable table surface: 514 x 360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle-table min.: 117/701 mmfeed: 0,10 + 0,20 mm/UMotor output: 1,45 / 1,9 kWheight of the machine: ca. 1840 mmweight of the machine ca.: 285 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 400 mmz-travel: 330 mmtotal power requirement: kWweight of the machine ca.: 2100 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 85 mmx-travel: 400 mmy-travel: 250 mmz-travel: 140 mmw-axis: 450 mmtable surface area: 600 x 380 mmtable load: 300 kgspeeds: 30 - 2500 U/minadjustment speed: 0,02 - 0,08 mm/mintool taper: SK 30 Control: Elesta CNC 211 total power requirement: 9,2 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 2750 x 1700 x 2700 mm- CNC Control Elesta 211- with misc. tool holdersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BAZ Johnford FMC 850 for sale The machine is built in 1999 and can be viewed under chipboard. Enclosed is a type picture of the machine! Available in mid-June!

bore capacity in steel (diameter): 40 mmarm length: 1050 mmworkpiece height max.: - mmturning speeds: 15 - 2800 U/minfeed range: 0,075 - 0,45 mm/mindimensions: 2450 x 1300 x 2300 mmWeight: 1500 kgControl: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mmy-travel: 400 mmz-travel: 375 mmtotal power requirement: kWweight of the machine ca.: 7150 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1270 mmy-travel: 660 mmz-travel: 610 mmtotal power requirement: kWweight of the machine ca.: 8680 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mmy-travel: 500 mmz-travel: 500 mmcontrol: Heidenhain TNC 430 spindle speed:: 10000 U/minpower capacity - milling spindle: 13/9 kWfeed: 30 m/minrapid traverse: 30 m/minno. of workpieces in the magazine: 24 Stücktool taper: SK 40 table surface area: 800 x 500 mmtable load: 0,5 tOverall size: 1,9 x 3,3 x 2,6 mmweight of the machine ca.: 4500 kgUsed vertical machining centre in good condition.- external eletronic hand wheel- coolant system- servo tool magazinThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25462 Technical data: - Drilling capacity in ST 37 to 32 mm - Drill spindle holder with tightening thread M 12 / MK 3 - Drilling spindle speeds 120 to 1600 rpm - Drilling unit height-adjustable by hand crank - Larger distance table / boring spindle 650 mm - Drilling spindle stroke with fine feed by handwheel 130 mm - Drilling spindle projection 205 mm - Drill milling unit can be rotated 360° - Coordinate table with 3 T-slots 730 x 210 mm - Table travel X-axis 250 mm / Y-axis 200 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 1150 x H 1100 x D 1100 mm - Weight approx. 270 kg

Drilling capacity St 60/GG 22: 40/50 mm Thread cutting St 60/GG 22: M 36/M 45 Table clamping surface: 600 x 1800 mm Height adjustment of the boom: 450 mm small/large drilling radius: 305/1305 mm Spindle holder: SK 40 Quill stroke: 200 mm Spindle speeds infinitely variable: 15 - 2800 rpm Infinitely variable feeds: 5 - 2000 mm/min Spindle drive, frequency-controlled: 5.5 kW electr. Connection: 400 V, 14 kVA Weight: 3400 kg Space requirement: 3800 x 2000 x 2500 mm

Key data: 13 mm

Vario Speed 280 - 4500 rpm 380 V 16 A Length 0.70 m Width 0.57 m Height 2.05 m Steel table Vise Drill Chuck Röhm Supra 1-13 mm

CONTROLS  CNC controls OKUMA OSP-P300MA WORKING RANGE -CUBIC-  X-axis travel: 560 mm  Y-axis travel: 560 mm  Z-axis travel: 625 mmSPINDLE / HEAD  spindle revolutions (max): 15000 /minX/Z SLIDE  number of tool positions (total): 12   number of live positions: 12   - rotation speeds (max): 5000 /min  - drive power: 5.5 kWTOOL MAGAZINE  number of positions: 146 AUTOMATIC WORKLOAD EQUIPMENT  number of store positions: 2   Workpiece diameter max.: 600 mm  worpiece length max.: 900 mm  pallet length: 400 mm  pallet width: 400 mm  number of pallets: 2 ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzATTACHMENTS  chip conveyor: yes   coolant unit: yes   through spindle coolant attachment: yes   closed cabin: yes   European CE standards: yes

x-travel: 1016 mmy-travel: 610 mmz-travel: 760 mmtotal power requirement: ? kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: 3 x 2,5 x 3,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.