boring mills and machining centers used for sale (3,276)

Key data: 3000 mm, 820 mm, 720 mm

48-cavity tool magazine High pressure pump 40 bar Mazak Monitoring B Renishaw RMP60 Probe Tool length measurement NC rotary table with 360,000 positions Chip conveyor, ejection left Cylinder interpolation Rapid Traverse Constant Tilt Angle Milling spindle, synchronized threading 5-axis simultaneous machining

5-axis machining center, year 2004, CNC 840D. Used machine in good condition. More info & price on IndustrialBuyer.

Auction-ID: A1-49016-7

Equipped with cross table and machine clamp Auction-ID: A1-49016-16

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 15441 €: 296.47 €: 40 mm: MK 4 : 300 mm: 1,5 / 3,0 kW: M30 : 610 mm: 850 mm: 1920 mm: 440 kg: 0 - 300 mm/U: 160 mm: 125 mm: 150 - 700 mm: 590 x 450 mmDisplay with the following functions:- Selection of operating mode: manual drilling / drilling with feed / tapping- Spindle speed- Feed rate- Zero point setting- Drilling depth- Piece counter- Chip breaking mode- Jump switch mode (for efficient drilling of square tubes)- Spindle stop (automatically stops the spindle after the drilling cycle)- Free cutting time modeDrilling capacity / normal drilling performance 35/40 (in E335/ST60)Automatic feedDrilling depth adjustment with fine adjustment and undervoltage triggerEMERGENCY STOP pushbuttonStepless speed controlConnection cable (1.5 m) with CEE plugDrill protection with electr. FuseThermal overload protection3 years warranty for single sh ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 3649.63 €: 15 mm: B 16 : 214 mm: 40 - 4000 U/min: 0,54 kW: M10 : 355 mm: 485 mm: 1027 mm: 70 kg: 125 - 490 mm: 300 x 250 mm: 82 mmTHE HEIGHT-ADJUSTABLE HEAD MAKES IT IDEAL FOR SHORTER USERS, E.G., FOR TRAINING WORKSHOPS AND SCHOOLSPLUS - CONTROL PANEL- Drilling mode / Tapping mode- Zero point setting- Drilling depth adjustment- Infinitely variable speed adjustment- Piece counter- Spindle stop function (spindle stops automatically after drilling)Drilling capacity / normal drilling Performance 13 / 15 (in E335/ST60)Manal feedTapping deviceControl panel with OLED displayRobust, high quality drill head hood with ergonomically inclined frontHead height adjustment via toothed rackLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionSpindl ...

Wagner WMC 1800 CNC Machining Center (2013) Manufacturer: Wagner Type: WMC 1800 Year of Make: 2013 Siemens 828 controller Condition: good, used, under production X-travel 1800mm Y-travel 900mm Z-Travel 700mm Tool holder SK40 IKZ 25 bar with belt filter system Tool Measurement Handwheel Documentation Without tools! Auction-ID: A7-49053-7

Heidenhein TN 410 control,table working area 475x4600 mm,travels:X 3900 mm,Y 400 mm,Z 425 mm,distance between spindle nose and table surface 190 - 615 mm,tool magazine capacity 56,maximum table load - 900 kg,spindle taper ISO 40,maximum spindle speed 10500 rpm,main drive motor power 9.2 kW,maximum spindle torque 60 Nmmachine dimensions - 7000x3000x3400mm,control cabinet - 3700x900x1900mm,hudraulic unit - 3500x2000x1500mm Auction-ID: A7-49398-23

RADIAL DRILL SASS mod. TRL 1600 Max. working diameter 90/110 mm Max. spindle/column centre distance 3,020 mm Min. drilling radius 695 mm Max. drilling radius 3.345 mm Min. spindle nose-to-base distance 540 mm Max. distance between spindle nose and base 2.250 mm Spindle - CM 6 110 mm Spindle stroke 550 mm Spindle speed - 24 from 19 to 1.540 RPM Spindle motor power 20 HP Column diameter 650 mm Total weight 15.700 kg Complete with: - Worktop (cube) Auction-ID: A1-48745-25

equipped with automatic cooling system; unused; in suitcase; 5637 Auction-ID: A1-49224-4086

Key data: 1040 mm, 600 mm, 500 mm

Manufacturer: DMG Model: DMC 104V linear Year: 2006 Condition: Used Stock number: 9445 Control system: HEIDENHAIN iTNC 530 Switch-on hours: 60797 h Hours: 23735 h Work table length: 1250 mm Work table width: 600 mm Maximum table load (uniform): 800 kg Maximum spindle speed: 12000 1/min X-axis travel: 1040 mm Y-axis travel: 600 mm Travel Z axis: 500 mm Cone: SK 40 Tool magazine capacity: 30 Machine height: 2800 mm Machine length: 4060 mm Machine width: 2450 mm Machine weight: 8800 kg Equipment: Air conditioning in the electric cabinet Spindle temperature Oil mist extraction Workpiece Probe

Key data: 460 mm, 510 mm, 560 mm

Manufacturer: Kitamura Model: MYCENTER HX 300 iG Year: 2018 Condition: Used Stock number: 9444 Work table length: 305 mm Work table width: 305 mm Maximum spindle speed: 15000 1/min Number of axes: 4 pieces X-axis travel: 460 mm Y-axis travel: 510 mm Travel Z-axis: 560 mm Max. tool diameter: 95 mm Max. tool weight: 10 kg

Manufacturer: HAAS Model: VF 4SS Year: 2017 Condition: Used Stock number: 9443 Control system: HAAS Work table length: 1321 mm Work table width: 495 mm Spindle drive power: 22.4 kW Maximum vertical spindle speed: 12000 1/min X-axis travel: 1270 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Machine weight: 6087 kg Equipment: 2x double 5th axle

Manufacturer: HAAS Model: VF 2SS Year: 2014 Condition: Used Stock number: 9442 Control system: HAAS Work table length: 914 mm Work table width: 356 mm Maximum table load (uniform): 680 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Machine weight: 3539 kg Equipment: 4. Axis

Key data: 762 mm, 406 mm, 508 mm

Manufacturer: HAAS Model: VF 2SS Year: 2013 Condition: Used Stock number: 9441 Control system: HAAS Work table length: 914 mm Work table width: 356 mm Maximum table load (uniform): 680 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Machine weight: 3539 kg Equipment: 2x double 4th axle

Key data: 762 mm, 406 mm, 508 mm

Manufacturer: HAAS Model: VF 2SS Year: 2012 Condition: Used Stock number: 9440 Control system: HAAS Work table length: 914 mm Work table width: 356 mm Maximum table load (uniform): 680 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Machine weight: 3539 kg Equipment: 4. Axis

Manufacturer: DOOSAN Model: DNM 400 A Year: 2011 Condition: Used Stock number: 9438 Control system: FANUC Work table length: 920 mm Work table width: 435 mm Maximum table load (uniform): 600 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 435 mm Travel Z-axis: 510 mm Machine height: 2509 mm Machine length: 2093 mm Machine width: 1962 mm Machine weight: 5000 kg

x-travel: 400 mmy-travel: 400 mmz-travel: 375 mmcontrol: Siemens 840D sl Linear total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: - mmy-travel: - mmz-travel: - mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mmy-travel: 1000 mmz-travel: 1000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 500 mmz-travel: 550 mmControl: Mazatrol Smooth G spindle turning speed - stepless: 15000 U/minspindle motor: 11 kWdistance table - lower edge spindle: 150 - 700 mmrapid traverse: 42 m/mintable surface area: 1050 x 500 mmworkpiece weight max.: 750 kgtool taper: CAT 40 total power requirement: kWweight of the machine ca.: 5,7 tdimensions of the machine ca.: mdimensions of the machine ca.: 3,34 x 2,33 x 2,9 m- CNC control Mazatrol Smooth G- 30-fold tool changer (CAT 40)- NIKKEN 4th Axis -ROBOJOB MA-PAL Robot with Controller & Accessories - Loading & Unloading Pallets - Swarf Conveyor & Swarf Bin. EXOMIST Mist Extractor - Renishaw Tool Setter - Renishaw Probe - Renishaw Receiving Unit - Peripheral Safety Guarding - Selection of Spindle Tooling - Set of Manuals.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition; testing is possible by prior arrangement. It underwent a general overhaul by Retos in 2017.

The machine is in good technical condition; it can be tested by prior arrangement.

A KERN 5-axis CNC machining center with EROWA Robot Compact is offered. Travel X/Y/Z: 500mm/500mm/400mm, simultaneous 5-axis machining, hydrostatic guideways in the X and Y axes, swivel range: -10° to +110°, feed rate X/Y/Z: 30m/min, max. acceleration: 10m/s², max. spindle speed: 40000rpm, spindle power: 37kW, max. torque: 12000rpm, tool taper: HSK-E40, tool magazine: 50, tool change time: approx. 3s, control: Heidenhain iTNC 530 smart.TNC, laser tool measurement, workpiece touch probe, EROWA PowerChuck P, EROWA Robot Compact year of manufacture 2013 with 70 magazine positions, including 55 positions ITS 72 and 15 positions ITS 148, max. transfer weight pallet incl. workpiece: 30kg, automatic loading and unloading of the magazine also possible during machining, machining medium: oil, belt filter system and max. high-pressure supply 80bar, oil mist extraction system and fire extinguish ...

Drilling process: single-lip gundrilling, operating method: rotating tool, number of working spindles: 1, nominal drilling depth: approx. 750mm, drilling range for solid drilling in steel: approx. 30mm, drilling range for counterboring in steel: approx. 40mm, spindle drive: 11kW, max. spindle speed range I: 1800rpm, max. spindle speed range II: 5700rpm, max. feed rate range I: 320mm/min, max. feed rate range II: 160mm/min, rapid traverse: 3.5m/min, clamping table X/Y: 420mm/1280mm, cross-slide table manually operated, max. transverse travel: 400mm, table clamping surface X/Y: 600mm/600mm, high-pressure coolant system for deep-hole drilling oil with 1000l coolant tank, flow rate: approx. 2-94l/min, max. pressure at max. flow rate: 45bar, pump power: 11kW, separate control cabinet. The machine underwent an extensive partial overhaul in 2018, during which the machine was disassembled and cl ...

Travel X/Y/Z: 600mm/400mm/460mm, spindle-to-table distance: 200mm-660mm, table size X/Y: 700mm/410mm, max. table load: 250kg, rapid traverse X/Y: 72m/min, rapid traverse Z: 60m/min, max. spindle speed: 12000rpm, spindle power: 7.5kW, tool taper: BT40, tool magazine: 24+1, max. tool diameter: 80mm, max. tool length: 250mm, tool change time: 1.6s, control: Mitsubishi M64S, through-spindle coolant: 20bar, probing system: Renishaw, machine weight: approx. 4300kg. Including a tool cabinet with approx. 100 tool holders. Inspection possible by arrangement.

bore capacity in steel (diameter): 35 mmthroat: 300 mmbore stroke: 180 mmturning speeds: 55 - 1450 U/mintaper MK: 4 column diameter: 145 mmtotal power requirement: 2,2 kWweight: 500 kgdimensions: 800 x 1000 x 2000 mmFeatures:- Heavy-duty pillar drill - Infinitely variable speed control (V-belt)- Automatic spindle feed with electromagnetic engagement - Pole-changing motor- Right/left rotation of the drill spindle - Fixed drilling depth stop- Machine table with 2 T-slots height-adjustable via hand crank- Coolant system- Machine vise- Drill chuck- Emergency stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 90 mm, 1250 mm, 900 mm

Manufacturer: TOS Model No.: WHN 9B Condition: Used Stock number: 9427 Work table length: 1120 mm Work table width: 1000 mm Maximum table load (uniform): 3000 kg X-axis travel: 1250 mm Y-axis travel: 900 mm Travel Z axis: 1000 mm Machine weight: 12000 kg