lathes used for sale (2,977)

greates pass round over bed: 480 mmswing diameter over bed slide: 300 mmturning length: 1500 mmcentre height: 240 mmcentre distance: 1500 mmspindle bore: 42 mmspindle turning speed range: 14 - 1400 U/mintotal power requirement: kWweight of the machine ca.: 2,4 tdimensions of machine L x W x H: 3,00 x 1,05 x 1,40 mAccessories: 3-jaw chuck 250 mmø, MULTIFIX-head, running centerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 650 mm, 1300 mm, 1 U/min

Circulation diameter over bed 1300 mm, over support 1000 mm Center width 6000 mm Bore 130 mm Speed 1.6 - 630 1/min, infinitely variable in 3 ranges Longitudinal feeds 0.09 - 5 mm/rev Thread metr. 0.56 - 128 mm Thread inches 64 - 0.28 g/" Tailstock quill travel 250 mm Total connected load approx. 52 kW Rapid traverse Rotating bezel 2 fixed bezels closed 1 fixed bezel open Coolant tank with pump

Key data: 530 mm, 500 mm, 4000 1/min

Machine Details Stock-No. 1105-04005 Type of machine CNC Lathe Make COLCHESTER Type TORNADO 300 Year of manufacture 1995 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Great Britain Delivery time immediately Freight basis EX WORK Price Technical details turning diameter 530 mm turning length 500 mm control FANUC OT total power requirement 22 kW weight of the machine approx. 3.3 t Additional information GOOD MACHINE CNC CONTROL FANUC OT Cuck Taikstock VDI 40 Turret 12 P Chip Convoyer echnical information Swing over bed 530 mm Swing over cross-slide 330 mm Distance centre tot centre 500 mm Max longitudinal travel Z-axis 20 m/min Max cross travel X-axis 10 m/min Spindle cone A2-8 Dia of spindle bore 90.5 mm Power on the spindle 22 kW Number of speeds 4000 rpm Command Fanuc Total power needed 53 kVa Length 3500 mm Wid ...

Key data: 300 mm, 450 mm

Control OKUMA ... OSP-P300LA-e Turning diameter ... 300mm Rotation length... 450mm Inclined bed Spindle bore ... 68mm Driven tools 12 Axis X ... 235mm Axis Z ... 520mm Axis C ... 360° Machine weight... 5000kg L x W x H ... 2545x1870x1791mm Main engine power ... 11/15kW Bar feeder Spindle speed ... 38-3800 rpm The machine is in good condition, possible to test under electricity.

turning diameter over bed: 435 mmturning diameter over slide rest: . mmturning length: 750 mmturning speeds: U/mindigital readout: digital readout: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 320 mmturning diameter over slide rest: 200 mmturning length: 900 mmturning diameter in the gap: mmturning speeds: 75 - 2000 U/mincentre height: 160 mmspindle bore: 50 mmtailstock quill taper MT: 3 MKconnected load frequency: 230 Vtotal power requirement: 1,5 kWweight of the machine ca.: 0,29 tdimensions of the machine ca.: 2,0 x 0,8 x 1,56 mProfessional lathe3-jaw chuck4-jaw chuckfaceplatebezel fixedrunning bezelQuick-change steel holder with 4 cassettesHalogen machine lightChip tray, chip protection wallHardened and ground bed tracksComplete coolant systemfeed protectionmachine toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 200 mmturning length: 400 mmcontrol: Siemens type: C 200-4 840 Cspindle passage: 65 mmTool changer: 2 x14 Pos.Turret 12-fold, 12 stations: c-axis: live tooling: 2x Revoler total power requirement: kWweight of the machine ca.: 4 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 300 mmturning length: 360 mmcontrol: Siemens S3 Tswing diameter: 370 mmTool changer: 14 Poslive tooling: turning speeds: 25-4000 U/mintransmission ratio: 2 total power requirement: kWweight of the machine ca.: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 300 mmturning length: 360 mmcontrol: Siemens S3 Tswing diameter: 370 mmtail stock: Tool changer: 14 Postotal power requirement: kWweight of the machine ca.: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 350 mmturning diameter over slide rest: 196 mmturning length: 1250 mmturning speeds: 3250 U/mindigital readout: bed width: 350 mmtotal power requirement: 7,5 kWweight of the machine ca.: tdimensions of the machine ca.: 8x2x1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 80 mmturning length: . mmcontrol: Siemens C 200tool change unit: 14 live tooling: swing diameter: 130 mmspindle passage: 42 mmturret head: 2 total power requirement: kWweight of the machine ca.: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gildemeister Sprint 65 Linear CNC lathe (with 2nd spindle, 3 turrets and Y-axis) Diameter of spindle bore 65 mm Spindle speed 5,000 rpm Spindle motor 25/20 kW Spindle speed counter spindle 5,000 rpm X-axis movement 165 / 165 / 165 Movement Y-axis 80 mm Z-axis travel 220 / 150 / 650 mm Movement of the W-axis (counter spindle to the main spindle) 690 mm C-axis indexing 0.0001° Number of towers 3 Number of tools on turret 12 (3x 12) Tool cone VDI 30 Bar Feeder LNS Quick Load Servo 65 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Gildemeister Sprint 65 Linear CNC lathe (with 2nd spindle, 3 turrets and Y-axis) Diameter of spindle bore 65 mm Spindle speed 5,000 rpm Spindle motor 25/20 kW Spindle speed counter spindle 5,000 rpm X-axis movement 165 / 165 / 165 Movement Y-axis 80 mm Z-axis travel 220 / 150 / 650 mm Movement of the W-axis (counter spindle to the main spindle) 690 mm C-axis indexing 0.0001° Number of towers 3 Number of tools on turret 12 (3x 12) Tool cone VDI 30 Bar Feeder LNS Quick Load Servo 65 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Control Siemens ... Sinumerik 840 D Turning diameter ... 365mm Rotation length ... 450mm Inclined bed Spindle bore ... 52mm Tool turret ... 12/6 Spindle speed ... 0-6000/min. Main engine power ... 12/16kW Axis C ... 360° Max. rod diameter ... 60mm L x W x H ... 4000 x 1640 x 1730mm Machine weight ... 3500kg The machine is in good condition, possible to test under electricity.

CNC Lathe YANG type SML-20 Year of construction: 1999 Travel X: 520 mm Numerical Command FANUC Serial OTD Maxi diameter in brocken bed: Ø 480 mm Maxi turning diameter: 200 mm x length 508 mm Spindle diameter: Ø 42 mm Rotation: 4500 RPM Tailstock CM4 Turret 8 tools Equipped with chip conveyor Equipped with 1 Bar Feeder type DH 65 Weight: approx 2,5 T

Key data: 300 mm, 500 mm, 4000 1/min

Machine Details Stock-No. 1105-04001 Type of machine CNC Lathe - Inclined Bed Type Make HARDINGE Type CONQUEST T 51 Year of manufacture 1997 Type of control CNC Storage location HAGUENAU FRANCE Country of origin UK Delivery time Immediatly Freight basis ex warehouse, loaded Technical details turning diameter 300 mm turning length 500 mm control fanuc 18 T max. swing diameter 400 mm spindle head A 2-5 Bar Material Dia. 51 mm turning speed range 4000 rpm spindle drive 11/15 kW Torque 168 Nm Tool Diameter 32 mm Rapid traverse 30 m/min total power requirement 15 kW weight of the machine approx. 3.2 t dimensions of the machine approx. 2.0 x 1.7 x 1.8 m Accessories cooling attachment Additional information FANUC 18T CONTROL 3 JAWE CHUCK + taistock CHIP CONVOYER

Key data: 320 mm, 600 mm, 3500 1/min

Stock-No. 1105-03841 Type of machine CNC Lathe - Inclined Bed Type Make LEADWELL Type LTC 20 Year of manufacture 1990 Type of control CNC Storage location HAGUENAU FRANCE Country of origin taiwan Delivery time by appointment Freight basis EX WORK Price Technical details turning diameter 300 mm turning length 600 mm control Fanuc O- T Travel -X Axis 175 mm Spindle Bore: Ø 50 mm Number of Turrets: 1 piece No. of tools in turret 1 12 pieces power capacity 11/15 kW spindle nose A2-6 tailstock quill taper MT 4 feed range 1 - 15000 mm/min Rapid Traverse 12 / 15 m/min total power requirement 30 kW Additional information CNC FANUC OT turret 12 tols TAILSTOCK CHUCK Chip Convoyer

equipped with Iemca Boss 332E-r/32 barfeed new in 2008 with 12 mm guide channels - chip conveyor - Fanuc 18i-TB Control

turning diameter: ca. 500 mmswing diameter: ca. 600 mmtravel -x axis: ca. 400 mmtravel -z axis: ca. 600 mmspindle turning speed range: 2000 U/minspindle drive: 63 kWcontrol: SIEMENS control: SINUMERIK System 3 tool turret: 1 x 12 Postotal power requirement: kWweight of the machine ca.: 9,3 tdimensions of the machine ca.: m- R-version, turret right hand side of 3-jaw chuck -Accessories: hydr. 3-jaw chuck 400 mmø, various toolholders for turret, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 mm, 450 mm, 3800 1/min

Control OKUMA ... OSP-P300LA-e Turning diameter... 300mm Rotation length ... 450mm Inclined bed Spindle bore ... 68mm Tool changer... 12 Driven tools... 6 Bar feeder Axis X ... 235mm Axis Z ... 520mm Axis C ... 360° Machine weight ... 5000kg L x W x H ... 2545x1870x1791mm Main engine power ... 11/15kW Spindle speed ... 38-3800 rpm. The machine is in good condition, possible to test under electricity.

Key data: 340 mm, 1000 mm, 5000 1/min

Control: OSP-P200 Turning length: 1,000 mm Turning diameter: 340 mm Vibration diameter above bed 580 mm Speed: 45 – 5,000 rpm Tool turret 12 places (driven) Bar passage 80 mm Direct recording: BMT 60 Equipment: - One touch IGF -Conveyor - Touchsetter - 3-jaw chuck (SMW 315 HB) passage 85 mm - NC tailstock - Multilingual control - Coolant pump 8 bar

Key data: 178 mm, 485 mm, 100 mm

Turning length: 485 mm Rotation diameter: 178 mm above bed / 100 mm over cross slide Spindle Passage: 15.5 mm Spindle speeds: 25 - 2,150 rpm. Tool Container: Tripan Container Equipped with: - Rohm 3-jaw chuck with different jaws - Zahrade Set - Collet set -Operating instructions Country of origin: UK Machine LxWxH: 1180 x 700 x 1200 mm Machine weight: 170 kg

Key data: 600 mm, 1250 mm, 3500 1/min

Machine Details Stock-No. 1105-03997 Type of machine CNC Lathe - Inclined Bed Type Make GILDEMEISTER DMG Type NEF 600 Year of manufacture 2007 Type of control CNC Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight basis EX WORK Price Technical details turning diameter 600 mm turning length 1250 mm greates pass round over bed 600 mm centre height 350 mm Spindle Bore 92 mm turning speed range 3500 rpm Rapid Travel - Longitudinal/Face 20 m/min face stroke 400 mm tailstock quill diameter 100 mm Tailstock Quill Stroke 1150 mm tailstock taper MT 5 Turret (X-Stations) 12 turning diameter over slide 410 mm Additional information acc.: hydr. 3-Jaw Chuck 400 mm, Chip Conveyor, Coolant CNC FANUC 210 IS

turning diameter: 372 mmturning length: 520 mmcontrol: Siemens 820 D inkl Operat weight of the machine ca.: 4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 400 mm, 460 mm, 4000 1/min

Machine Details Stock-No. 1105-03996 Type of machine CNC Lathe - Inclined Bed Type Make LEADWELL Type F 1 Year of manufacture 2016 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time by appointment Freight basis EX WORK Price Technical details turning diameter 440 mm turning length 420 mm control FANUC O I TC Travel -X Axis 140 mm Spindle Bore: 62 mm Number of Turrets: 1 piece No. of tools in turret 1 12 pieces power capacity 11 kW spindle nose A2-5 feed range 1 - 15000 mm/min Rapid traverse 30 m/min Additional information CNC FANUC OI TB 2 AXIS WITH CHUCK AND TAILSTOCK

Key data: 500 mm, 700 mm, 3500 1/min

Make: Spinner Model : TC 110 SMCY Control Siemens 840 D ShopTurn Year of construction 2006 Specifications: Turning diameter 500 mm Circulation diameter 690 mm Turning length 900 mm Y-axis -55/+65 mmmm C-axis 0.001° Spindle passage main spindle 110 mm Spindle passage counter spindle 66 mm Main spindle motor 28 kw High-speed main spindle 3200 rpm. Counter spindle speed 5000 rpm. Rapid traverse x/y/z 24 m/min. Sauter Star Revolver VDI 50 Number of stations 12-fold Driven tools 12 Speed driven tools 4000 rpm. Machine weight approx. 7800 kg Dimensions set-up (L x W x H) with chip conveyor 5500 x 2200 x 1800 mm Accessories: automatic pick-up device Measuring arm Bar feeder preparation Conveyor 3D Renishaw Probe Coolant gun Increased coolant pump Hainbuch Collet Chuck for Main Spindle 3 Jaw chuck counter spindle Various tool holders Documentation

Control: Siemens 840 C Max. turning diameter: 1300 mm Max: Circulation diameter: 1400 mm Axle stroke: Z-1000 mm X-1500 mm Dimensions to top edge of spindle: 940 mm Bearing Ø in front bearing: 710 mm Max. speed: 500 rpm Max. torque: 30 000 Nm Main spindle motor AC max.: 100/40% ED 76/115 kW Chip diameter: 1600 mm Feed intake/centeringØ: 790 mm Max. feed force Z/X axis: 25000 N Axis speed Z-X-axis: 0.01 – 14000 mm/min Z-X-Axis Displacement Measuring System: Angle Position Sensor/Linear Measuring System Tool carrier: Disc turret with B-axis Tool holders: Modular system UTS 50 Machine weight: 30 000 kg The machine is still energized. Viewing possible at any time by arrangement.

Turning diameter 80 mm Bar diameter 20 mm Spindle speed 10000 rpm X1, Y1, Z1, X2,Z2 axes Controller Fanuc FANUC 160iB LNS barfeeder

turning diameter: 100 bis 400 mmtool taper: SO weight: 30 tcontrol: Siemens 840 D Ball machining centerSpecial facilityfor balls 100 to 400 mmA viewing and demonstration is possible by appointment.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC turret lathe Okuma LB15 at call The OKUMA LB 15 CNC lathe has been professionally serviced regularly since its purchase and is in perfect technical condition. It has a hydraulic chuck with a diameter of 250 mm and a turret holder for 12 tools. The turning spindle rotates at a speed of 70-3800 rpm and has a diameter of 75 mm. Technical specifications of the CNC lathe OKUMA LB-15 – CNC control: OSP 5000L-G CNC system (German) – Data transmission: RS232 – Tool turret: 12-position type BOLT ON – Slain chuck: 250 mm – Spindle: 70-3800 rpm (11 kW, 30 min; 7.5 kW – continuous operation) – non-continuous spindle – Diameter of the spindle bore: fi 75 mm (at a depth of 70 mm, measured from the front of the lathe chuck and without jaws) – Diameter of the spindle bore: fi 28 mm (at a depth of 200 mm, measured from the front of the lathe chuck and without jaw ...