other metal working machines used for sale (10,887)

Offer 26187 Technical data: - Nominal temperature / continuous temperature infinitely variable up to 900 ° - Temperature control via NABERTHERM Controller C 40 - Heating from both sides, back wall, door and floor - Motorized lifting door - T. max.ca. 120 min - Drive 400 V / 59 kW - Interior dimensions approx. W 1000 x H 550 x D 1900 mm - Usable volume approx. 950 L - Space requirement approx. W 2100 x H 2800 x D 2800 mm - Weight approx. 2900 kg

Key data: 300 °C

Manufacturer: Reinhardt Model: Titan 6700 Year: 2023 Condition: Used Stock number: 9482 Maximum temperature: 50-300 C Working Area: 6.7 m³

ITF Coclea LC 5/4 rotary drum washer was built in 2006 in Italy by I.T.F. S.r.l. Impianti Trattamenti Finiture. The machine is designed to clean large quantities of very small metal parts that are contaminated with oils, greases, emulsions or other contaminants. Cleaning takes place inside a rotating drum, which ensures that the parts are constantly in motion. As a result, all surfaces of the parts are evenly exposed to the cleaning agent, enabling the effective removal of contaminants even from hard-to-reach places. The Coclea LC 5/4 rotary drum parts washer is used in manufacturing plants and wherever the rapid, effective and repeatable cleaning of large numbers of parts is essential. Technical specifications of the ITF Coclea LC 5/4 rotary drum washer - compressed air pressure: 6 bar - control voltage: 24 VAC - power supply of the ITF machine: 3x 400 V

LM 175 S solvent cleaning machine was built in 2000 in Italy by AMA UNIVERSAL. The machine is used for the effective removal of oil, grease and other contaminants from workpieces, machine parts and tools. Cleaning takes place inside a closed work chamber using perchloroethylene (PER). A basket with dimensions of 550 x 300 x 300 mm and a load capacity of 80 kg enables cleaning of a larger number of parts. Once the cycle is complete, the used solvent is fed into the filtration and distillation system, where it is cleaned and prepared for reuse. This solution reduces the consumption of the cleaning medium and helps to lower the machine’s operating costs. The LM 175 S is also equipped with an ultrasonic cleaning system with a power of 1200 W and a frequency of 23000 Hz. The use of ultrasonics helps to remove contaminants even from hard-to-reach surfaces, including holes, gaps and variou ...

MONTASTAMPI M30 die splitter was built in 2000 in Italy by ATTREZZERIA UNIVERSAL di Caramaschi Armando S.a.s. The machine is used to split and rotate stamping dies used in metal forming. It eliminates the need for manual handling, replacing traditional methods of spliting dies using cranes or other handling equipment. As a result, it is ideal for production facilities that use large-scale stamping tools. The MONTASTAMPI M30 enables the handling of large-sized and heavy stamping dies. The dies are attached to specially designed clamping systems, which ensure high stability during operation of the machine. The die rotation process is precisely controlled, which enhances ease of operation and ensures the safety of both the machine and the operator. The MONTASTAMPI die splitter weighs 6000 kg. Technical specifications of the MONTASTAMPI M30 die splitter - maximum load on the upper pla ...

SCHLEICHER WV-PL 160/800 coil feeding line was built in 1987 in Germany by H. Schleicher GmbH & Co. Maschinenfabrik. The line is used for the automatic feeding of material from a coil to presses and other machines used in metal forming. The automation of this process stage improves mass production, increases its efficiency and reduces the need for manual work. The SCHLEICHER WV-PL 160/800 coil feed line consists of a roller feeder, a straightening machine and a sheet metal decoiler. It is designed for coils with a maximum width of 800 mm and a weight of 200 kg. A 4 mm thick material strip is decoiled and straightened, then fed directly into the machine’s working area. The precisely adjustable feed rate ensures uniform strip feeding, which translates into process repeatability and stable operation of the entire line. All this makes the SCHLEICHER press feed line an excellent choice f ...

Automatic powder coating line was built in 2018. After a test launch, it has never been used. The powder coating line is designed for the automatic powder coating of metal components with a maximum length of 1500 mm and a width of 380 mm. It enables the performance of the entire technological process, from surface preparation, through the application of powder coating, to the final curing of the coating. The preparation of workpieces for coating takes place in a three-zone chemical section with immersion tanks. There, the elements are cleaned prior to the application of the coating. The process uses demineralised water, which ensures proper surface preparation and enhances coating adhesion and durability. Transportation of parts between successive stages is performed using a Power Free overhead conveyor system with height adjustment. Powder coating takes place in KC-08 spray boo ...

CNC vertical machining center Type: VF-2ss Manufacturer: Haas Year: 2010 Control: Haas Spindle hours: 1049 Included 4th axis X: 762 mm Y: 406 mm Z: 508 mm Spindle speed: 12000 rpm Spindle taper: ISO 40 Table: 914 x 356 mm Max table load: 1361 kg Tool magazine: 24 positions Chip conveyor Tool probe Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

CNC vertical machining center Type: DM-2 Manufacturer: Haas Year: 2019 Control: Haas Spindle hours: 3700 X: 711 mm Y: 406 mm Z: 394 mm Spindle speed: 15000 rpm Spindle taper: ISO 40 Tool magazine: 18+1 positions Chip conveyor Tool probe Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

CNC vertical machining center with pallet exchange Type: VF-2 Manufacturer: Haas Year: 2007 Control: Haas X: 762 mm Y: 406 mm Z: 508 mm Table: 914 x 356 mm Max table load: 1361 kg Max spindle speed: 8000 rpm Tool magazine: 24 positions Automatic pallet changer Chip conveyor Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Haeger Model : 824-WT-3H Type of machine: press-fit insertion machine Year of manufacture: 2007 Operating hours: 5290 h Amps: 9.6 Frequency: 50/60 Hz Voltage: 380/480 Phase: 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: TRUMPF Model: TruMatic 7000-1300 Type of machine: Punch and laser cutting combination machine Year of manufacture: 2009 Technical Specifications: - Operating hours, machine: 53,608 h - Operating hours, laser on: 48,375 h - Operating hours, beam on: 9,876 h (as of 23.10.2017) - Laser power: 4000 Watt - Max punching force: approx. 220 kN - Working area, laser operation: approx. 2540 x 1280 mm - Working area, punching operation: approx. 2540 x 1370 mm - Control system: Bosch MTX compact - Max sheet thickness: 8mm - Floor space required: approx. 7950 x 6700 mm - Machine weight: approx. 23,000 kg - Total connected load: 87 kVA Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Baykal Type of machine: mechanical guillotine shear Year of manufacture: 1996 Technical Specifications: - Cutting length: 2520 mm - Operating voltage: 380/50/3 (V/Hz/Ph) - Motor power: 7.5 kW - Strokes per minute: 48 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: YANCHENG Model: XYJ-3/100 Year of Manufacture: 2016 Type of Machine: stamping machine press Capacity: 100T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 2 - Width 2 - Height 1.6 (cm or m) - Weight 1000 kg - Power 11 (Kw or KVA, ) - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: YANCHENG Model: XYJ-3/100 Year of Manufacture: 2017 Type of Machine: stamping machine press Capacity: 100T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 2 - Width 2 - Height 1.6 (cm or m) - Weight 1000 kg - Power 11 (Kw or KVA, ) - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2016 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2017 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2018 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2019 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2020 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2021 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2022 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: WUXI Type of Machine: Hydraulic Press machine (350 T) Year of Manufacture: 2023 Capacity: 350T Materials Processed: Wood Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3 - Width 1 - Height 4 (cm or m) - Weight 13000 kg - Voltage 220 Volts - Frequency 60 Hz - Phases 3 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: MAKA Model: DC 7 D Year of Manufacture: 2016 Type of Machine: Milling machine Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 10, Width 4, Height 3 (cm or m) - Weight 4000 kg - Voltage 480 Volts - Current 65 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: MAKA Model: DC 7 D Year of Manufacture: 2017 Type of Machine: Milling machine Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 10, Width 4, Height 3 (cm or m) - Weight 4000 kg - Voltage 480 Volts - Current 65 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: MAKA Model: DC 7 D Year of Manufacture:2018 Type of Machine: Milling machine Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 10, Width 4, Height 3 (cm or m) - Weight 4000 kg - Voltage 480 Volts - Current 65 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: MAKA Model: DC 7 D Year of Manufacture: 2019 Type of Machine: Milling machine Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 10, Width 4, Height 3 (cm or m) - Weight 4000 kg - Voltage 480 Volts - Current 65 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: MAKA Model: DC 7 D Year of Manufacture: 2022 Type of Machine: Milling machine Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 10, Width 4, Height 3 (cm or m) - Weight 4000 kg - Voltage 480 Volts - Current 65 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: MAKA Model: DC 7 H Year of Manufacture: 2022 Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 10, Width 4, Height 3 (cm or m) - Weight 4000 kg - Voltage 480 Volts - Current 68 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: MAKA Model: DC 7D H Year of Manufacture: 2023 Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 10, Width 4, Height 3 (cm or m) - Weight 4000 kg - Voltage 480 Volts - Current 68 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines