other metal working machines used for sale (10,917)

Key data: 3700 kg, 775 mm

Fully Automated Forging Hammer Line (2002) BECHE KG H 5B (55 KJ) Line Description ‍ The complete line consists of the following machines: ‍ Tilting Device, Stahlmann Step conveyor, Stahlmann Cold Belt Conveyor with Lifting Device Conductive Heating System, Stahlmann, E89, 2019 Heated Conveyor Belt Forging Robot, Lasco / Kuka, KR 60-3F, 2019 Central Control Cabinet Safety Fence with Safety Doors Short-Stroke Die Forging Hammer, Müller Weingarten (Beche), KG H 5B, 2002 Extraction robot, Kuka, KR 60-3F, 2019 Discharge station, Stahlmann ‍ Technical Details ‍ (2002) Short-Stroke Die Forging Hammer BECHE KGH 5B ‍Machine identification data Name: Short-Stroke Die Forging Hammer Model: KGH 5B Machine number: 127050 Year of manufacture: 2002 ‍ Operational parameters Working capacity max. 55 kJ Max. impact frequency 99/min Max. usable imp ...

Key data: 3700 kg, 775 mm

Fully Automated Forging Hammer Line (2004) BECHE KGH 5B (55 KJ) Line Description ‍ ‍ The complete line consists of the following machines: ‍ Tilting device, Stahlmann Conductive heating system, Stahlmann, D400G21/39000 XSH, 2004 Frako reactive power compensation Automation system, Lasco, 2009 2 Forging robots, Kuka, KR 30-3F Conveyor belt with lifting device Control cabinet with higher-level control system Short-stroke drop hammer, Beche, KG H 5.0B, 2004 Discharge robot for removal, Kuka, KR 30/2, with bucket, 1999 ‍ Technical Details (2004) Short-Stroke Die Forging Hammer BECHE KGH 5B ‍Machine identification data Name: Short-Stroke Die Forging Hammer Model: KGH 5.0B Machine number: 155002 Year of manufacture: 2004 ‍ Operational parameters Working capacity max. 55 kJ Max. impact frequency 99/min Max. usable impact rate 55/min Maximum ...

Key data: 5600 kg, 810 mm

Fully Automated Forging Hammer Line (2009) LASCO HO-U 800 (80 KJ) The complete line consists of the following machines: ‍ Tilting device, Stahlmann Step conveyor, Stahlmann Induction heating unit, ABP, EBS 345-W, 2009 Quick-release conveyor Automation unit, Lasco, 2009 2 Forging robots, Kuka KR 30-3F, 2013 2 Bases, weight each: 336 kg Conveyor belt with lifting device, safety enclosure with doors Top pressure drop forging hammer, Lasco, HO-U 800, 2009 Picking robot, Kuka, KR 150/2, 1998 Dispensing station, consisting of: Discharge conveyor and blow-off control, Manufacturer Schramm ‍ ‍ Technical Details ‍ (2009) Short-Stroke Die Forging Hammer LASCO H-OU 800 ‍Machine identification data Name: Short-Stroke Die Forging Hammer Model: HO-U 800 Machine number: 00.08175 Year of manufacture: 2009 ‍ Operational parameters Working capacity max. 80  ...

Fully Automated Forging Hammer Line (2023) SCHULER KG H 6.3 B (63 KJ) Line Description The complete line consists of the following machines: ‍ Tilting Device, Stahlmann Step Conveyor, Stahlmann Cold conveyor belt Conductive Heating System, Stahlmann, E89, 2023 Transfer Gripper Hot Conveyor Belt with Lifting Device 2 Forging robot, Kuka, KR 30-3F, 2010 Safety Fence with Safety Doors Short-Stroke Die Forging Hammer, Schuler, KG H 6.3 B, 2023 Discharge / Extraction Robot, Kuka, KR 150/2, 2010 Output Station, Stahlmann, 2010 ‍ ‍ Technical Details ‍ (2023) Short-Stroke Die Forging Hammer SCHULER KGH 6.3B ‍Machine identification data Name: Short-Stroke Die Forging Hammer Model: KGH 6.3B Machine number: 119820 Year of manufacture: 2023‍ Operational parameters Working capacity max. 63 kJ Max. impact frequency 98/min Max. usable impact rate  ...

HECKERT ZFWVG 250 x 1250 Thread Milling and Spline Hobbing Machine Max. workpiece diameter 250 mm Workpiece diameter over bed 500 mm Center height over bed 260 mm Threading/hobbing length 1250 mm Min/Max. module 2/18 Workpiece spindle bore 102 mm Bore of the collets 100 mm Tailstock quill stroke 100 mm Speed 45 – 560 rpm Lead of leadscrew 1,2 '' links / left mm Workpiece turning speeds 0,0032-2,65 U/min Rolling feed 0,027-5,66 mm/WU Longitudinal hob feeds 0,3-198 mm/min Main drive 4 kW Feed motor 25 NM Coolant pump 0,09 kW Lubrication pump 0,37 kW Total power requirement 9,5 kW Weight of the machine ca. 3,40 t Accessories; -heavy duty head -standard head -steady rest -change gears set -centers and arbors -spindle spare -counter weight Will be re-paint in original brown colour.

length: 560 mmwidth: 730 mmheight: 1150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

enlargement: 10-100x diameter: 200 x 150 mmweight of the machine ca.: 0.15 tdimensions of the machine ca.: 0.4 x 0.5 x 0.5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 6 St.: 70/100 kg: ca. 820 x 740x 560 mmweight: ca.110 kgdrawer measurements: 450 x 600 mmColour: 7035/5012 RALThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: ca. 1500 mmwidth: ca. 700 mmheight over floor: ca. 840 mm: 2 St.With 2 drawers, interior height approx. 140 mmand 2 storage compartments, door height approx. 380 mmMobile on casters, casters can be lowered so that the table remains stable when workingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories:, Total enclosure,, Cooling unit for dielectric,, automatic fire extinguishing system,, Mist extractor, Probe,, Machine lamp,, automatic central lubrication,, Workpiece carrier ISO50,, Measuring mandrel,, Tailstock., Cutter outside diameter: Max. 250 mm, Cutting length: max. 260 mm, Shank tool diameter: 10 - 250 mm, Outside diameter disc-shaped tools: Max. 250 mm, Tool weight max.: 20 kg, X axis travel: 275 mm, Y-axis travel: 300 mm, W-axis travel: 200 mm, A-axis mounting cone: ISWO 50, E-axis swivel range: 180 °, Required space for the machine: 2535 x 2200 x 2220 mm, Weight approx.: 4500 kg, Connected load: 4.5 kW (400 V / 50 Hz), colour: gray RAL 7045/7047

Manufacturer: POS Model: POSmill E1100 Year of Manufacture: 2015 Axis Travel - X-axis: 1,100 mm - Y-axis: 600 mm - Z-axis: 510 mm Control System - Control: Heidenhain iTNC 625 Tool Changer - Automatic tool changer: 40-position Electrical Data - Rated power: 300 kVA - Voltage (3-phase): 400V / 50 Hz - Fuse: 250 A Machine Weight - Net weight: 8,800 kg Find more here - / Contact us at -

Key data: 3 , 2000 kg, 2500 mm

Description, subject to prior sale Robot type: IGM RE 497-S in hanging Position Control: full digital PC-Robotcontrol, Type RCE Software: WIN 10 & Linux based System + igm Robot software K6 Welding process: 135 (GMAW), single-wire, Ø1.2 mm Welding power source: digital Invert Welding Power Source TPS 500i (500 A at 40% duty cycle) Robot periphery: Rotating boom for floor installation with 2.5 m boom length No. of Working-stations: 1 Working station: 3-axis L-Manipulator with lifting device with 2 tons nominal load capacity Security Technology: Pistol-Security-Shut-down in wrist axis Emergency Stop on Hand tablet, on Manipulators and Control Panel three-coloured warning light for the operating Status partition Security Door Technical indications, subject to error.

Heckert ZFWVG 250 x 2000 Thread Milling and Spline Hobbing Machine. Max. workpiece diameter 250 mm Workpiece diameter over bed 500 mm Center height over bed 260 mm Threading/hobbing length 2000 mm Min/Max. module 2/18 Workpiece spindle bore 102 mm Bore of the collets 100 mm Tailstock quill stroke 100 mm Speed 45 – 560 rpm Lead of leadscrew 1,2 '' links / left mm Workpiece turning speeds 0,0032-2,65 U/min Rolling feed 0,027-5,66 mm/WU Longitudinal hob feeds 0,3-198 mm/min Main drive 4 kW Feed motor 25 NM Coolant pump 0,09 kW Lubrication pump 0,37 kW Total power requirement 9,5 kW Dimensions 3700x2400x1600 mm Total weight 5200 kg Accessories; -heavy duty head -standard head -steady rest -flange -change gears full set

On behalf of the customer, we offer an EOS M280. The system is in good overall condition; the laser has been replaced and currently operates at 367.6W at 100% output (measurement from January 2026, Primes laser power meter). In terms of performance, only conditionally suitable for aluminum and copper materials., - Laser hours approx. 34,000 h (February 2026), - Machine hours approx. 45,700 (February 2026), - PSW version 3.7, - Machine comes with parameter editor for freely setting the parametersOther material licenses on the machine:, - GP1 Surface (20µm), - In718 40µm, - MP1 50µm, - MS1 40µm, - MS1 50µm, - GP1 Start 40µm, - 200° heating installed, - no leaks (low gas consumption and low O2 content during the process

x-travel: 550 mmy-travel: 400 mmz-travel: 360 mmb-axis: +/- 110 °c-axis: 360 ° 0Control: HEIDENHAIN iTNC 530 spindle taper: HSK63 spindle turning speed - stepless: 20000 U/mintools in tool magazin: 48 weight of the machine ca.: 10 tdimensions of the machine ca.: 3 x 5 x 3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1200 mmwidth: 800 mmweight of the machine ca.: 0.55 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1600 mmwidth: 1400 mmweight of the machine ca.: 2.1 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1300 mmwidth: 1100 mmweight of the machine ca.: 1.5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Portable 7-axis coordinate measuring system ROMER Infinite 1.0 SC 5028SC. Measuring range diameter: 2800mm, point repeatability: approx. +/-0.045mm - 0.050mm, volumetric length measurement uncertainty: approx. +/-0.064mm - 0.075mm, wireless communication: Wi-Fi 802.11b/g, battery operation, software base: WinRDS driver compatible with measurement software solutions PolyWorks, PC-DMIS, PowerInspect, Metrolog. Including integrated balancer, transport case, probe set 6mm, 15mm, tip, mounting plate with 3 magnets, calibration bar with calibration certificate. Inspection by appointment possible.

Variabele snelheid met frequentie verzendenDistance between centers: 1000 mm Swing over bed: 402 mm Swing over cross-slide: 380 mm Swing in gap: 560 mm Diametre of main spindle bore: 42 mm Power on main spindle: 4 kW Number of speeds: 40 > 2800 rpm Digital screen: yes Length: 2390 mm Width : 910 mm Height: 1625 mm Weight: 1190 kg

Waterjet cutting machine with plasma Manufacturer: TCI Cutting Type: BP-C 4020 Year of Make: 2019 CNC control: TCI CNC 4.0 Working area: 4x2 m Equipment: 1 cutting head KMT OEM SL-VI 50 hp 4,000 bar with high-pressure pump 1 Plasma cutting head with Hypertherm XPR300 power source TCI SRA 4.0 High Voltage Control System Abrasive transfer system Abrasive measuring system Anti-collision system Water treatment plant TCI HIDROSYSTEM 2.0 Sludge removal system Lantek Expert 2D software with automatic nesting function

CNC ball and dome honing machine with turbo separator Workpiece diameter ( balls ) ○22- ○64 mm Workpiece diameter (carrots) ○22- ○64 mm Control: GE FANUC / Series 321i-A Measuring unit: Marposs Type 7/ MHIS For indoor and outdoor measurement Further technical data on request

- 2 matching pieces availebel- Cast iron not fabricated with welded construction- Made in ITALIA grey cast iron very ridged

his Mazak VCN 510C is a vertical machining center manufactured in 2003, designed for precision 3-axis machining operations. It features a robust construction with a machine weight of approximately 6000 kg, ensuring stability during high-speed machining. Technical data Travel distances: X 1050 mm / Y 500 mm / Z 500 mm Spindle: 12,000 min⁻¹, SK40 Tool magazine: 30 positions Control: Fusion Table size: approx. 1300 × 550 mm Cooling: 15 bar IK Machine weight: approx. 6,000 kg Machine is in daily use, ready for immediate operation Chip conveyor IKZ Documentation available Find more here - / Contact us at -

CNC vertical machining center Type: Vesta-1000 Manufacturer: Hwacheon Year: 2016 Control: Fanuc Series 0i-MD X: 1000 mm Y: 550 mm Z: 500 mm Distance table-spindle: 130 – 630 mm Working surface: 1100 × 502 mm Table load capacity: 700 kg Spindle speed: 12000 rpm Rapid traverse (X / Y / Z) m/min 36 / 36 / 30 Working feed (X / Y / Z) mm/min 1 – 24,000 Feed motor (X / Y / Z) kW 1.8 / 1.8 / 3.0 Automatic Tool Changer Tool taper: BT40 Tool changer: 24 positions Cooling through the center of the tool 30 bar Power consumption: 30 kVA Coolant tank capacity: 380 l Chip conveyor 4th axis TSUDAKOMA Wireless workpiece probe + tool probe. Dimensions:3335 × 2200 x 2670 mm Weight: 6500 kg Machine in good condition, under power Find more here - / Contact us at -

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 750 mm, 650 mm, 60 A

Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 1770 A, 1220 , 70

The OPS INGERSOLL EDM machine GANTRY 1200 HSJ / 64 bit, built in 2006, has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts have been carefully checked. The following overhaul work was carried out on the above-mentioned machine: Replacement of ball screw and ball bearings of the X, Y and Z axis. Replacement of all (4) ball screws of the tank drive. Inspection and test of the C-axis for tightness and accuracy Geometric verification of all axes according to OPS INGERSOLL protocol. Basic cleaning of the complete machine base. Cleaning of the complete working tank including replacement of the felt scrapers. Complete painting of the machine. Overhaul of the dielectric pumps.  ...

OPS INGERSOLL GANTRY EAGLE 800 Year of construction 2013 EAGLE Powertec PC/NC Controller 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn Quick Programming Powertec Handheld Multifunctional Handheld Controller Manual EDM with Powertec Handheld EAGLE Powertec - Fine Finishing Generator PT 60, 60 Ampere High Speed Jump max. 18,000 mm/min. Travel (X, Y, Z) 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-fold pick-up disc magazine Work container (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Top load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system incl. fire damper Electrode clamping system EROWA ITS ECOTEC Energy Saving Func ...