other metal working machines used for sale (10,903)

weight max. in kg: 2000 kgtable length: 1300 mmstroke height: 190-1010 mmtable width: 800 mmstroke of worktool slide: 22 mm/sek.weight: 280 kgFurnishing:- For ergonomic work at the optimal working height- With closed platform- Separate control unit with 3 meter cable, control buttons and emergency stop switch- Stepless lifting and lowering- Stable powder-coated steel construction- Guaranteed stability- Circumferential safety strips- Meets the safety criteria of EN 1570- High pressure cylinder with double safety functionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10.0 barEffective free air delivery: 700 L/minmotor: 400 V0: 250 Literweight of the machine ca.: 397 kg.total power requirement: 5.5 kWrange L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price: 8.848 euros / special price on request Made in GermanyFurnishing:- with container and dryer / can be used immediately- Microprocessor control SOLID base control- Network pressure sensor- Belt driven drive system- low compressed air temperature due to effective aftercooler- lying underneath compressed air tank- including cold compressed air dryer automatically working with pre- and post-filter ( mounted )(also available with 7.5 bar)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10.0 barEffective free air delivery: 1.950 L/minmotor: 400 V0: 250 Literweight of the machine ca.: 467 kg.total power requirement: 15.0 kWrange L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 13.576 euros / special price on request Made in GermanyFurnishing:- with container and dryer / can be used immediately- Microprocessor control SOLID base control- Network pressure sensor- Belt driven drive system- low compressed air temperature due to effective aftercooler- lying underneath compressed air tank- including cold compressed air dryer automatically working with pre- and post-filter ( mounted )(also available with 7.5 bar)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10.0 barEffective free air delivery: 1.000 L/minmotor: 400 V0: 250 Literweight of the machine ca.: 410 kg.total power requirement: 7.5 kWrange L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 9.450 euros / special price on request Made in GermanyFurnishing:- with container and dryer / can be used immediately- Microprocessor control SOLID base control- Network pressure sensor- Belt driven drive system- low compressed air temperature due to effective aftercooler- lying underneath compressed air tank- including cold compressed air dryer automatically working with pre- and post-filter ( mounted )(also available with 7.5 bar)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 3000 mmWheel width: 500 ( 450 ) mmwork height max.: 880 (+/- 60) mm MADE IN GERMANY Description:- 3000 mm roller and measuring track type Exakt A standard- with digital position indicator el. connection 230 V 50 HZ with power pack- Display in mm display (measuring range: +/- 0.5 mm on 1,000 mm)- Measuring stop can be adjusted from the workplace by means of a hand wheel- with pneumatic brake for fixing the dimensions.- Stable material stop trolley, 12 ball bearings- on a large guide profile.- The stop is adjustable and can be folded back manually.- Basic version of roller and measuring track- in stable steel construction, all versions are stationary- The max.measuring length is the track length minus 450 mm- Ball-bearing support rollers Ø 60 x 2 mm- Galvanized conveyor roller with axis Ø 15 mm- Load capacity per meter of roller conveyor approx. 300 kg- Roller pitch 250 mm- Web  ...

through-put width: 580 mmworking heigth: 615 mmdiscs: 570 x 260 mmAir consumption: 400 l/min.air pressure: 2,7 - 5,5 bar0: 184 Liter0: Luft .. 3/8 Zollweight: 125 kgrange L-W-H: ca. 1350 x 1300 x 1800 mmFurnishing:- Working space: 1220 x 615 x 580 mm (LxWxH)- including sandblasting gun (grain size 0.149 - 0.250 mm can be used)- Including container for blasting material- including dust extraction- freely movable foot switch- Lighting in the work area- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

through-put width: 820 mmworking heigth: 810 mmAir consumption: 680 l/min.air pressure: 8,6 bar: 148 Liter0: Arm Loch 180 mmair clutch: 3/8 Zollweight: 160 kgrange L-W-H: ca. 1350 x 1300 x 1800 mmFurnishing:- Working space: 1110 x 820 x 810 mm (LxWxH)- very stable construction- including sandblasting gun (usable grain size 0.149 - 0.250 mm)- including container for blasting material- including dust extraction- freely movable foot switch- Lighting in the work area- Transport dimensions / packed: 1350 x 1000 x 1100 mm- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area L-W-H: 1000 x 900 x 900 mmrange L-W-H: 1300 x 1750 x 2200 mmweight: 350 kgDescription:- Compact and elegant design- Easiest operation- low material consumption- optimal use of space- highly effective dedusting- efficient way of working- Environmentally friendly working without dust nuisance- controllable material consumption- Any conventional, dry abrasive is suitable as a blasting material such as B. corundum, steel sand, glass grain, glass beads, ceramic beadsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions:: innen 1160 x 580 x 580 mmAir consumption: 400 - 800 l/min.air pressure: 3,4 - 8,0 barworkpiece weight: max. 120 kgtotal power requirement: 1,2 kWweight: 115 kgrange L-W-H: 1225 x 935 x 1640 mmFurnishing:- Very large front flap that opens upwards- Suitable for various blasting materials e.g. quartz, glass ball, plastic ball, etc.- With gas pressure springs for quick and easy loading and unloading- Integrated suction system with exchangeable air filter- Jet gun without a finger trigger The air flow is controlled by a foot pedal- Two fluorescent tubes (230 volts) in a separate housing with protective screen and exchangeable protective film- Light switch with double function: suction and cabin lighting are switched on and off at the same time Regulation of the working pressure via pressure regulator with manometer- Jet head (grain size 0.125 - 0.42 mm can be used)- Container for ...

dimensions:: innen 1160 x 870 x 850 mmAir consumption: 400 - 800 l/min.air pressure: 3,4 - 8,0 barworkpiece weight: max. 150 kgtotal power requirement: 1,2 kWweight: 160 kgrange L-W-H: 1320 x 1200 x 1760 mmFurnishing:- Very large front flap that opens upwards- Suitable for various blasting materials e.g. quartz, glass ball, plastic ball, etc.- Integrated suction system with exchangeable air filter- Jet gun without a finger trigger The air flow is controlled by a foot pedal- Four fluorescent tubes (230 volts) in a separate housing with protective screen and exchangeable protective film- Switch for suction and cabin lighting Regulation of the working pressure via pressure regulator with manometer- Jet head (grain size 0.125 - 0.42 mm can be used)- Cross struts on the feet easy transport with the pallet truck- Container for blasting material- dust extraction- foot switch- Operating instruct ...

thread dia.: 20 Mturning speeds: 400 U/minthread: M 4 - M 20 Mworking area: 1900 Rmax.working range: 200 Rmin.Description:The AT models have a radius of up to 1900 mm and theirconstruction a flexible workspace. For professional use.Easy to mount on a worktop.Furnishing:- including 7 thread cutting inserts• M3 20111812 DIN 371 19• M6 20111823 DIN 371 31• M8 20111824 DIN 371 31• M10 20111826 DIN 371 31• M12 20111827 DIN 376 31• M16 20111829 DIN 376 31• M20 20111831 DIN 376 31- Control valve with lubrication- Including air motor- Adapter connection size 2- The cutting head can be pivoted vertically downwards by 90 °- The cutting head is pivoted and rotatable through 360 °- Operating instructions in German without the perforated table as per Fig.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FOBA DP 15 Marking Laser The FOBA DP 15 laser marking system uses a fiber laser with a wavelength of 1064 nm and a lens focusing of f=254 mm (254 mm focal length). This combination enables the permanent and sharp marking of materials such as metals and plastics by the "all-round laser". The 1064 nm wavelength is well absorbed by many materials, which can be used for annealing marking, color change, or material removal. Application: The fiber laser is a versatile "all-round laser" for marking industrial products. It is ideal for metals and a wide range of plastics. The technology enables permanent, legible and precise marking. Functionality: The laser beam creates a focused point of light that penetrates the material. Depending on the material and settings, various effects can be achieved, including: Annealing: A change in color of the material due to heating. Color cha ...

FOBA Laser FOBALAS 94S Nd:YAG Laser Marking System Marking Laser FOBALAS F 94S Laser Marking System Laser Type: FOBALAS 100 CW/QS - ND: YAG Performance class 4 P max = 120 W 1,064 μm XY/2-100 HPM Type: Foba Volts: 15 V Wavelength 1064 Hours: 43927 More items - new and used - can be found in our shop! International shipping costs on request!

Min. schuifraamhoogte: 200 mm Max. Schuifraamhoogte: 460 mm 230v / 50 Hz Gassenfilters: Type A (Organisch) / Type BE (zuur) , Type F (Formaldehyde) en Type K ( Amoniak en Amines)

Manufacturer: AUERBACH Model: AX3 TLF Year of Manufacture: 2011 Technical Specifications - Total Weight: 15 t - Wiring Diagram: Included (Dok) - Assembly Diagram: Included (Dok) - Temperature Range: +5 °C to +40 °C - Power Supply: 3-phase ~ 50 Hz - Rated Voltage (Main): 400 V - Control Voltage: 24 V DC - Auxiliary Voltage: 230 V AC - Connected Load: 46 kW - Rated Current (Machine): 87 A - Current of Installed Devices (Normal Operation): 100 A - Supply Cable Protection: 041 – 045 Find more here - / Contact us at -

max. wheel diameter: 400/500 mmCNC-Control: GE FANUC Series 160i-M pinion diameter - max.: 400 mmcrown gear diamter max.: 500 mmx-axis: +/- 70 mmy-axis: 200 mmz-axis: 200 mmaxis angle: 90 Gradspeeds:: R 0 - 3000 / T 0 - 5000 1/minrated current: 30 kVAweight of the machine ca.: 6,2 tdimensions of the machine ca.: 3,2 x 2,5 x 2,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pipe bending machine Type: Gigalus 130 S Producer: Mewag Year: 2014 bending and shaping of 3D pipes with a diameter of min. 40mm and wall thickness min. 4mm. Based on CAD drawings, it converts the exact shaping of pipes into the final form, including the simulation of bending angles. Engine power: 40kW max.radius: 450mm bending accuracy: +/- 0.2 degree length accuracy: +/- 0.5 mm Machine in good condition, under power. Find more here - / Contact us at -

Manufacturer: SPINNER Model: SERVO - LOAD 80 - 1200 Year of Manufacture: 2011 Voltage (U): 3/PE ~ 400 V Frequency (f): 50/60 Hz Input Current (Iᵍ): 5 A Fuse Rating (Iₙ): 10 A Find more here - / Contact us at -

Type: Ultrix 800 RT A high-end 5 interpolated axes multitasking machining centre. Designed for the highest performance in machining 3D shapes that require turning, milling, drilling and grinding.nbsp;Tailored to applications ranging from complex gears, impellers to molds, dies, tools,... for projects in aerospace, automotive, power generation,... max workpiece diameter: 900 mm A-axis: -30° / 110° C-axis: continuous max distance between spindle and table: 650 mm Options fitted to machine: 1 - high speed spindle of 40 000 rpm 2 - table with diameter 700 mm 3 - toolchanger with 150 positions 4 - chipconveyor 5 - coolant system with recuperation 6 - temperature regulation for coolant 7 - high pressure cooling (40 to 70 bar) through spindle 8 - smoke extraction system 9 - chip collection box 10 -nbsp;presetting system and tool integrity 11 - Renishaw measuring probe X-axis: 800 mm Y-axis ...

The machine is in very good condition and ready for operation. An on-site inspection is possible.

2x 6 niveaus capaciteit van één niveau: 552 kg lengte: 5000 mm breedte: 1800 mm hoogte: 2550 mm (zonder inhoud)

We are selling our die-sinking EDM system here because of a new acquisition. This is a machine that was sold by the company MATRA at that time. This is a DECKEL DE35C. In the meantime, the company Exeron has taken over the service. The travel is: X=600mm Y=400mm Z=400mm The die-sinking EDM system has a 4-fold electrode changer The control system on the machine was recently overhauled, the power supply and the UPS were renewed. The machine was also otherwise continuously checked and maintained by the Exeron company in the event of malfunctions. Machine is running and is still on the power for a possible test. Operating hours are: 33196 hours. Various tool holders can be part of the price negotiation.

Electric roll Bending Machine 3 rolls Capacity: 800 mm x 3 mm Rolls diameter: Ø 105 mm Motor: 4 CV New electrical panel Front/back rotation Voltage: 220 V Tri (possibility of reversing the motor in 380 V) Equipped with: Emergency stop Equipped with: Protective cover Dimensions (L x W x H): 2000 x 1300 x 1300 mm Weight: approx 1,5 T

LS6/4 knotted mesh production machine was built in 2006 in Poland by Maszyny S.C. The machine enables the efficient production of durable and damage-resistant L-, M-, S- and SL-type mesh. The entire production process, from wire feeding to net braiding, is performed fully automatically. Technical specifications of the LS6/4 fixed knot fence production line - type of produced net: L, M, S, SL - maximum height of the produced net: 200 cm - vertical wires spacing: 15 or 30 cm - number of horizontal wires: 25 pcs. - edge wires diameter range: 1.8-3 mm - inner wires diameter range: 1.5-2.5 mm - edge wires maximum stress: Rm=1200 MPa - horizontal wires maximum stress: Rm=450 or 1150-1200 MPa - vertical wires maximum stress: Rm=450-500 MPa

LS8 2500 knotted mesh production machine was built in 2016 in Poland by Maszyny S.C. The machine is used in the efficient production of durable and damage-resistant L-, M-, S- and SL-type mesh. The entire production process, from wire feeding to net braiding, is performed fully automatically. The fixed knot fence production line weighs 2600 kg. Technical specifications of the LS8 2500 knotted mesh production machine - type of produced net : L, M, S, SL - maximum height of the produced net: 225 cm - horizontal wires spacing: 15 or 30 cm - number of horizontal wires: 26 pcs. - edge wires diameter range: 1.8-3 mm - inner wires diameter range: 1.5-2.5 mm - edge wires maximum stress: Rm=1200 MPa - horizontal wires maximum stress: Rm=450 or 1150-1200 MPa - vertical wires maximum stress: Rm=450-500 MPa - power: 11 kW - pneumatic pressure: 0.6 MPa - power supply: 3x 400 V; 50 Hz  ...

2012 KRAUSS MAFFEI 850-1400-1000 MX Z Injection moldin machine missing electrical and mechanical parts Find more here - / Contact us at -

2008 SAR/KUKA R/SCHS/GR/ETI/UST/MED/FB/HBG/BAS Injection robot Machine was functional before conservation, obsolete robot version, retrofit could not be done. Find more here - / Contact us at -

We are offering for sale a Haas SL-30BHE with a Iemca Barfeeder Haas SL-30BHE - Voltage: 360–480 - Phase: 3 - Frequency (Hz): 50/60 - Full Load Current: 40 Amps - Largest Load: 70 Amps - 3400 rpm Ø102mm bore - Hainbuch SK80 - USB - Conveyor - Toolsetter - Rigid tapping - 12 x VDI40 turret - Partcatcher Iemca Bar Feeder - Model: KID 80 - Year of Manufacture: 2008 - Weight Capacity: 500 Kg - Rated Voltage: 400 V - Phase: 3 ~ - Frequency: 50 Hz - Rated Current (Ie): 3.5 A - Short-circuit Capacity (Icn): 5 kA Find more here - / Contact us at -