other metal working machines used for sale (11,284)

Various metalworking machines are available. 1) Larger BBM guillotine shears, year of manufacture: 1995. 2) Nimak spot welding machine, year of manufacture: 1990s. 3) Roundel machine Schwartmanns, year of manufacture: 1987. 4) Smaller lathe Weiler, year of manufacture: 1966. 5) Table-top stud welder Soyer, year of manufacture: 2000s. 6) Freestanding grinding motor. 7) KSM deburring machine, year of manufacture: 1980s. 8) Larger Tox hydraulic stamping press, year of manufacture: 1990. 9) TES 15 hydraulic press, year of manufacture: 1972. 10) Single-column table press, year of manufacture: 1955. 11) Landert honing machine. On-site inspection is possible.

- Power consumption: 26 kVA 3P400V /N/PE/50HZ; Fuse 63A - Compressed air connection: min. 5bar, max. 7bar - Extraction capacity: min. V = 1700 m³/h at Δp = -850 Pa min. 20 m/s, run-on time 15s The plant was cleaned, packed by the manufacturer, preserved and stored. It is complete and ready for operation. The facility can be visited at any time, by appointment.

Key data: 450 mm, 320 mm, 162 mm

For sale Charmilles wire EDM machine type Robofil 4020.1. The machine is in very good condition. Still to be seen under power. Lots of accessories!

power capacity: 63 / 93 kWvolt: 380 Vampere: 122 / 178 Aweight of the machine ca.: 0,5 tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. bar length 1,500 mm Bar diameter 4 – 85 mm Weight approx. 400 kg UNUSED!

WWM TS 560/8-1 wire drawing machine was built in 2014 in Italy by WWM Technology Srl (now EJP Italmec Sp. z o.o.). The machine is used in the process of reducing the diameter of various types of wire by pulling it through a series of rollers. Once reduced to the appropriate diameter, the wire is confectioned directly onto a carousel or stand. The wire drawing line consists of the following machines: 1. WWM TS 560/8-1 wire drawing machine 2. WWM SV5 vertical static wire pay-off 3. WWM DSM 01 mechanical descaler 4. WWM AF 1000 wire coiler Wire feeding precision is ensured by the WWM wire pay-off, which consists of two tilting drums and a central column. It enables easy loading of material coils weighing a maximum of 3000 kg each, without stopping the drawing machine. During threading, the sheave and basket are lowered by a hoist with AC motor. The scale on the entire surface of t ...

ITALMEC TSR 300/1+6 wire drawing line was built in 2020 in Poland by EJP Italmec Sp. z o.o. The purpose of the line is to reduce the diameter of various types of wire, i.e. steel wire or welding wire, by pulling it through a series of rollers. This process is performed fully automatically, thanks to the use of two additional devices – a wire pay-off and a wire coiler. The wire drawing line consists of the following parts: 1. ITALMEC TSR 300/1+6 wire drawing machine 2. ITALMEC SB2C vertical static wire pay-off with compensator 3. ITALMEC AHSC 30 horizontal static wire coiler The ITALMEC wire pay-off with rotating arm precisely unwinds material from spools, coils or racks towards the drawing machine without stopping it. It is equipped with a special device that stops the machine in case of wire breakage and a compensator that accumulates the amount of wire necessary to stop the  ...

A coolant separator is available. Volume flow: 4000m³/h, total pressure: 2000Pa, power: 4kW, connection diameter: 75mm, material: stainless steel. Documentation available. On-site inspection is possible.

table length: 3048 mmtable width: 1524 mmburner heads: 1 Control: CNC workpiece weight: 911 kgtraversing speed: 180 m/minweight: 4150 kgdimensions of the machine ca.: 9392 x 2232 x 2307 mmCUTTING CAPACITY:STRUCTURAL STEEL 25 mmSTAINLESS STEEL 15 mmALUMINUM 12mmBRASS 8mmCOPPER 8mmMACHINE AXES: 4 axes [X, Y, Z, U ]CUTTING HEAD: Precitec ProCutterCAD/CAM SOFTWARE: LANTEK EXPERT CUT4 servo motors for all axial movementsCNC CONTROL PANEL 15 5” touch screenIPG laser sources and coolers integratedPrecitec Procutter cutting head systemAIR FILTER (compressed air filter)CONVEYOR BELT under cutting areaClosed housing and specially coated filter protection windowsLOADING / DISCHARGING SYSTEMPROPORTIONAL GAS AND PIPE SYSTEMThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spindle diameter 135 mm Morse 6 Attachment Cone Max. drilling depth in 1 pass 600 mm Min. distance spindle-column axis 485 mm Max. distance between spindle and mast axis 3,500 mm Min. distance from spindle to table 520 mm Max. distance from spindle to table 1,845 Min distance from spindle to plate - base 1,130 mm Max. distance from spindle to plate - base 2,455 mm Min drilling radius from column axis 820 mm Max. drilling radius from column axis 3,875 mm Max. drilling diameter 78 mm stroke 8,000mm stolle top 10.000X2.500mm

Key data: 28 kVA

Dismantled and stored induction hardening system from Steremat Elektrowärme GmbH type EA 15DA-2C-HF turntable with 50 magnetic workpiece holders and a manual workstation, generator from ELDEC type: HFG 15 DA, HF power 15KW, power consumption at full load 18 KVA, frequency range 150 - 350 kHZ

Upstroke press Top lid can tilt open to allow mould to be (un)loadedCapacity: 150 ton Passage between uprights: 1850 mm Max ram adjustment: 500 mm Distance between table -- ram: 1000 mm Table area: 1800 x 1300 mm Height: 2350 mm

table-size: Breite: 800 mmtable-size: Tiefe: 350 mmworkpiece height: mmDimensions (L/W/H): 4600 x 3200 x 2500 mmweight of the machine ca.: 4,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pulling force - max.: 25 tmax. ram stroke: 1500 mmmax. workpiece diameter: 630 mmcutting speed: 1,5 - 7 m/minreturn speed: 7 - 25 m/minworkpiece height max.: 360 mmtool diameter: 130 mmShank diameter: 70 mmtable surface area: 600 x 600 mmControl: distance between columns: 635 mmtotal power requirement: 18,5 kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: 1,1 x 1,7 x 5,2 mMachine was hardly ever used, not even in single-shift operation.- 3 broaching positions, can also be used individually- Hydraulic drive- without tools or other accessoriesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 5.850 mmy-travel: 1.200 mmz-travel: 2.000 mmcontrol: HEIDENHAIN TNC 430 D table-size: 6.120 x 1.000 mmtable weight: 20.000 Kginternal coolant system feed: 20 barChip coveyor: inkl. handwheel: HEIDENHAIN HR-410 Tools changer: 60 fach/toolstaper ISO: ISO 50 engine output: 30 kWworking speed: 5.000 mm/minrapid taverse: 12.000 mm/minNumber of revolutions: 20 - 3.000 rpmtotal power requirement: 41 kWweight of the machine ca.: 31 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4.300 mmy-travel: 1.200 mmz-travel: 1.500 mmcontrol: Heidenhein TNC 426 PB table-size: 6.120 X 1.000 mmtaper ISO: ISO-50 Number of revolutions: 20 - 3.000 rpmwork speed: 5.000 mm/minhandwheel: HEIDENHAIN HR-410 table weight: 20.000 KgTools changer: 40 fach/toolsrapid traverse: 12.000 mm/mintotal power requirement: kWweight of the machine ca.: 28 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Epilog Model: 8000 Laser System Year of Manufacture: 2017 Mass: 80 kg max Laser Classification: Class 2 Laser Product Vacuum pump: GAST DOA-P725-BN Air filter: vacu Air UML 380 (AD Oracle IQ) Find more here - / Contact us at -

feed pressure: 8 barliter capacity: 1,65 m³ / mindimensions: 1000 x 750 x 950 mmtotal power requirement: 11 kWweight of the machine ca.: 175 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sweeping width: 942 mmworking width: Bodendüse: 700 mmtank: Reinigung: 79 ltank: Schmutzwasser: 83 lweight of the machine ca.: 145 kgdimensions of the machine ca.: 1,32 x 0,7 x 1,1 m- Exhibition machine and demonstration machine, like new-- Most compact ride-on scrubber-dryer from DiBO with 2 brushes- Possibility to dispense detergent: in ECO mode with constantSaving or automatic regulation of the machine depending on the speed of the machineBrush motors and suction: even less energy consumption, even moreSmoothness- Display: large, multilingual, including hour counter, battery leveland work programs- Memory card: allows the storage of battery charge cycles andPower consumption of the motor- CFS system: water distribution from the middle of the brush to avoid wasteAvoid cleaning solution- SLS system: self-leveling electronic system to keep the brushalways lies perfectly on the floor- ED ...

table diameter: 700 mmtable load: 0,6 tswivelling range: 0-90 Gradexcentricity: 200 mmtable turning speeds: 0,2 - 2 U/minTorque: max. 900 N/mtotal power requirement: 0,37 kWdimensions of the machine ca.: 1,1 x 0,92 x 0,8 mThe D-HB tilt and turn tables are very stable due to their heavy constructionand therefore particularly suitable for heavy and precisePositioning activities and circular welding work.Features:- Easy installation- Increase in production is made possible- Improvement of the welding quality through optimal positioning andCruise control- Reduction of crane hours and handling time, during which theImproved occupational safety.- Self-locking gear, therefore no leading or trailing behind with eccentricburden- Electronic components from Schneider, Siemens and Delta- Frequency-controlled stepless speed of the turntable- High stability due to the robust construction- CE certifica ...

thread dia.: M6 - M36 mmturning speeds: 156 U/minradius: 1200 mmangle adjustable from - to: 0 - 90 Gradweight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,4 x 0,1 x 0,7 mElectric tapping machine / 4450136SETFast and precise thread cutting with freely positionable swivel arm- The machine head can be swiveled from 0 to 90 degrees- Quick change chuck with slip clutch for safe thread cutting withoutRisk of breakage- Right-left rotation can be selected on the machine head- Setting of thread size, speed, pitch and cutting depth viaTouchscreen on the swivel arm- Manual mode: the stops after the set cutting depth is reachedSpindle automatic, forward and reverse must be activated manually.- Automatic mode: changes after the set cutting depth is reachedthe machine automatically from the forward to the return - ideal for thatThread cutting of several blind holesIncl. 1 each GT12 M6, M8 ...

thread dia.: bis M 16 mmturning speeds: 0 - 600 U/minthread: M5 - M16 working area: 2050 Rmax.working area: 500 Rmin.table surface area: 900 mmengine output: 3,0 kWweight: ca. 250 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: bis 4 / 100 mmthreading length: ? mmthread pitch: div. mmaccessories:: 4 Schneidköpfe total power requirement: 0,75 kWweight of the machine ca.: 350 kgdimensions of the machine ca.: 1,511,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: - tdiameter: 3 mmtotal power requirement: 2 kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1,5 x 1,5 x 2 mrivetting machineWorkspace: Ø 3The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

longitudinal travel: 400 mmcross travel: 160 mmtable length: - mmtable width: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

longitudinal travel: 400 mmcross travel: 160 mmtable length: - mmtable width: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: ISO 50 quill stroke: 150 mmturning speed range: 40 - 3600 U/mindrive motor: 22/33 kWswival range +/-: 23 °weight of the machine ca.: 0,8 tdimensions of the machine ca.: 1,811,2 mAssemblies for RAMBAUDI Rammatic 1201:1. milling head SK 50 / 22 kw / 40 - 3,600 min-1and:3. 30-fold tool magazine COSTELLI 7. measuring system / glass scale Heidenhain LS 706 C / ML 2840 mm8. measuring system / glass scale Heidenhain LS 706 C / ML 1140 mm 9. measuring system / glass scale Heidenhain LS 706 C / ML 1440 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10 barliter capacity: 1400 m³ / mindimensions: 700 x 550 x 1100 mmtotal power requirement: 11 kWweight of the machine ca.: 275 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: ? mmpower requirement: 1 kWtotal power requirement: 1 kWweight of the machine ca.: ? tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 560 mmtable load: 0,3 tswivelling range: 0-90 Gradtable turning speeds: 0,25 - 4 U/minTorque: max. 360 N/mcentre of gravity: max. 150 mmtotal power requirement: 0,4 kWThe D-HB tilt and turn tables are very stable due to their heavy constructionand therefore particularly suitable for heavy and precisePositioning activities and circular welding work.Characteristics:- Easy installation- Increase in production is made possible- Improvement of the welding quality through optimal positioning andCruise control- Reduction of crane hours and handling time, during which theImproved occupational safety.- Self-locking gear, therefore no leading or trailing behind with eccentricload- Electronic components from Schneider, Siemens and Delta- Frequency-controlled stepless speed of the turntable- High stability due to the robust construction- CE certificate- The D-HB series includes a rem ...