other metal working machines used for sale (10,862)

Type: C132MB 7,5 kW 380V - 16 amp

Type: T 132 M4 7,5 kW 1460 rpm For Labor 255 lathe

Type: DH 132S 8/4 2,2/3,3 kW 720/1440 rpm For Pinacho lathe SP 90 / 165

Type: AEEEF-PP008 5,5 kW 50 hz - 380V - 12,3 amp 1450 rpm 59 kg

Steady Ø 310 mm

Steady Ø 145 mm

Steady Ø 195 mm

Steady Ø 65 mm

Steady Ø 60 mm

LVD PPBL 200 ton x 4100 mmCapacity: 200 ton x 4100 mm Backgauge: manual Passage between uprights: 3150 mm Max stroke: 150 mm Max distance between table -- ram: 400 mm Depth of throat: 250 mm Table width: 200 mm Locking speed: 100 mm/sec Working speed: 6,5 mm/sec Returning speed: 65 mm/sec Electric motor (power): 11 kW Weight: 13,4 ton

Haco HSL 4100 x 12 mmCutting length: 4100 mm Max sheet thickness st 45: 12 mm Strokes/min: 7 > 11 str/min Adjustable cuttingedge: 0,5 > 3° Length: 4900 mm Depth: 2180 mm Height: 2250 mm Weight: 11 ton Number of sheet holders: 23x

rolling capacity max.: tworkpiece diameter: 470 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Demag 6,3 ton x 15 093 mmKind of: overhead travelling crane Capacity: 6,3 ton Span: 15 093 mm Tackle speed: 1 & 6,3 m/min Rotationspeed: 5 & 20 m/min Displacementspeed: 10 & 40 m/min Radiocontrol: no radio control Numbre of riggers : double rigger

Demag 6,3 ton x 11 410 mmKind of: overhead travelling crane Capacity: 6,3 ton Span: 11 410 mm Radiocontrol: no radio control Numbre of riggers : double rigger

We are offering a complete Water-Cooled Induction Leveling System, composed of the following components: 1. Electrical Power Unit - Power Supply: 3 x 400V, 50/60 Hz - Current (In): 50 A - Short-Circuit Current (Icc): 35 kA - Item: 01 - Type: IFC/A-25 (25 kW / 20 kHz) - Year: 2023 2. Inductor Unit - Manufacturer: ATE - Drawing: 239003100_0 - Item: 03 - Year: 2023 - Type: INDUKTOR RECHTS (Right Inductor) 3. Chiller Unit - Manufacturer: M.T.A - Model: TAEevo TECH 051 - Production Year: 2023 - Voltage: 400V / 3Ph / 50 Hz - Power Consumption: 8.8 kW - Current: 10 A - Protection Class: IP54 - Refrigerant: R410A - Charge: 2.088 kg - Global Warming Potential (GWP): 2088 - Cooling Capacity: 32.0 kW (EWT 20°C, LWT 15°C) - Water Flow Rate: 5.5 m³/h - Water Connections: 1 1/4" - Weight: 239 kg Find more here - / Contact us at -

Qty. 1 Second-hand shredder Mfc.: METSO Denmark A/S Model: M&J Eta PreShred 4000S Built: 2013 Condition very good Working hours: 11,347 Power supply: Voltage 400 V AC, 50 Hz Main motor: 2 X 200 kW Rated current 760 A Main motor, full load current 2 x 341 Amp., PLC controller Drive principle, hydrostatic transmission with power consumption limiter. Working cutting cassette: 2 shafts Operating asynchronously Speed: 33 rpm Number of rotary knives: 2 x 12 pieces Number of lower, fixed knives 2 x 24 pieces Bearings 2 x 2 barrel

GEKA HYDRACROP 55/S hydraulic ironworker machine was built in 2018 in Spain by MAQUINARIA GEKA S.A. The machine, equipped with 5 work stations, is designed for precision machining of flat bars and angle bars. Each station is controlled by two hydraulic cylinders, which give the possibility to work independently or in parallel on two stations simultaneously. The GEKA HYD 55 S ironworker machine weighs 1390 kg. Technical specifications of the GEKA HYDRACROP 55/S ironworker machine General data - maximum punching force: 55 t - maximum cutting force: 110 t - number of workstations: 5 - number of hydraulic cylinders: 2 - engine power: 5 kW - weight of the GEKA HYDRACROP 55/S machine: 1390 kg Flat bar shearing station - flat bar dimensions: 300 x 15 mm; 200 x 20 mm - blade length: 305 mm - working height: 880 mm Angle bar shearing station - shearing of angle bar at 90°: 12 ...

serial number: B024D04184T fork length: 1050- 1220 mmweight: 9640 kgsize of tire: 28 x 12 x 22 size of tire: hinten 22 x 8 x 16 : 70 % height of stroke: 4600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3 : 900 mm centre distance: 2x 4mm mmDistance between centres: 1x 5 mm mmcapacity: 600 kp : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial number: 7175455 : 3 Backenfutter Durchm. 30 tool taper: ja turret head: für 6-fach-Belegung centre distance: ca. 700 mmturning diameter: max. ca. 450 mmControl: FANUC dimensions of the machine ca.: 3.000 x 2.000 x 2.200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece weight per basket: 250 kgbasket dimensions: max. mmvoltage: pneumatisch weight of the machine ca.: 400 kgdimensions of the machine ca.: 1,35 x 1,50 x 2,35 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Demag Mannesmann 6,3 ton x 11 410 mmKind of: overhead travelling crane Capacity: 6,3 ton Span: 11 410 mm Tackle speed: 1 & 6,3 m/min Rotationspeed: 5 & 20 m/min Displacementspeed: 10 & 40 m/min Radiocontrol: no radio control Numbre of riggers : double rigger

Demag 5 ton x 15 100 mmKind of: overhead travelling crane Capacity: 5 ton Span: 15 100 mm Radiocontrol: no radio control Numbre of riggers : double rigger