other metal working machines used for sale (10,866)

Deburring of sheet metal edges using rotating stainless steel brushes up to sheet thickness 6 mm

Complete Mechanical Upgrade by GFM, with increase of Power to 900 Ton/hammer and new CNC in 1991 Numbers ̈of Hammers: 4 Forging force: 3.600 Ton (900t per hammer) Strokes per minute: 270 Maximum diameter of forging: - circular cross section: Ø 400 mm - square cross section: 320 mm Minimum output diameter: - circular: 60 mm - square: approx 50 mm Maximum length of forging with/without lateral reception: 8.000 mm / 9.700 mm Feed of manipulator A: 7.140 mm Feed of manipulator B: 9.940 mm Workpìece weight: 2500 kg Total power supply (nominal power): ca 1.600 kW Machine weight: 493.000 kg

Manufacturer: Omec Model: FSU/600 ACG Year of Manufacture: 1991 Type of Machine: Automatic Profile Milling Machine with Template Scanning Machine Details: Blade diameter approx. 60 cm, 380V, 50Hz Machine Powered: No Operating Hours: Approx. 2,000h Additional Accessories: Lathe, various saw blades Find more here - / Contact us at -

: 330 mm: 5000 mm: 450 mm: 330 mm: 450x330 mmdimensions of saw-band: 5000x34x1,1 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Details - Manufacturer : Prima - Machine Type: RAPIDO --------------------------------------------------------------- Electrical Specifications - Nominal Voltage: - 3-Phase: 400V - 1-Phase: 230V - Nominal Current: - 3-Phase: 47A - 1-Phase: 27A - Frequency: 50 Hz - Short Circuit Current: 70 kA Find more here - / Contact us at -

Kuka robot LBR iiwa 14 R820 + controller Sunrise Cabinet Including KUKA robot KRC4 SmartPad Control Panel Payload: 14 kg Reach: 820 mm Year of construction: 06/2016 The device can be demonstrated on site before purchase. Find more here - / Contact us at -

We are selling a Mitsubishi RV-12SDL industrial robot. It was checked before disassembly and is in good condition. The robot was regularly serviced until it was removed. Included is a Melfa CR2DA-701 controller and a teach panel with touch. Find more here - / Contact us at -

Melfa Mitsubishi RV-12SL A Melfa/Mitsubishi RV-12Sl industrial robot is for sale. It was checked before disassembly and is in good condition. The robot was regularly serviced until it was removed. It comes with a Melfa CR3-535M controller and an R28TB teach panel. Find more here - / Contact us at -

degree: 0working heigth: mmlength: mmwidth: mmdepth: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cast iron control/tracing marble Length: 1700 mm Width: 700 mm Thickness: 230 mm Height on feet: 940 mm Weight: 0,8 T

Robofil 4030SI-TW Wire EDM Machine Year of manufacture 2001 Technical details on request

We offer a highly productive 3D printer for industrial series production Trumpf TruPrint 5000 The 3D printer has already been dismantled by the manufacturer Disassembly logs are available as well as functional logs that prove that the machine was in operation before dismantling All axles are professionally secured The machine can be transported on a normal standard truck Faster to a high-quality 3D component The highly productive, semi-automated TruPrint 5000 3D printing system makes you fit for industrial series production. With features such as optional 500 °C preheating and Fullfield Multilaser equipment with three 500 watt TRUMPF fiber lasers, you are well equipped for highly demanding industrial applications. The machine manufactures high-quality components made of different metallic materials quickly and reliably – and at the same time meets the high quality stand ...

We offer a highly productive 3D printer for industrial series production Trumpf TruPrint 3000 The 3D printer has already been dismantled by the manufacturer Disassembly logs are available as well as functional logs that prove that the machine was in operation before dismantling All axles are professionally secured The machine can be transported on a normal standard truck Faster to a high-quality 3D component D1. Machine concept The TruPrint 3000 is a universal medium format press with external parts and powder management for industrial production Complex metallic components by means of 3D printing. Through your large construction volume, it offers a high degree of flexibility in terms of Size, number and geometry of each application. Bcu70Qrgxc Specifications TruPrint 3000 Build volume (cylinder) mm x mm Ø 300 x H 400 Processable materials5 - Weldable metals i ...

working heigth: mm0: 1000x500 mmtotal power requirement: kWweight of the machine ca.: 1.3 trequired space: 2.6x1.51x2.575 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

connected load frequency: 230 Vbattery: 24V / 100Ah Brush diameter: 510 mmturning speeds: 175 U/min0: Luft 24 L / stank capacity: 50 / 50 Literweight: 160 kgrange L-W-H: 1,1 x 0,52 x 1,0 mmKREMER floor cleaning machine:Packed with battery and chargerTheoretical surface cleaning:Output: 2000 m²/hSuction width: 850 mmCleaning width: 510 mmMax. working area incline: 2%Fresh/waste water tank volume: 50/ 50 LThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic feed via Diethei PD 100 control To the extension on the right Max. feed length: 2000 mm

tool adaptor: . weight: . kgmaterial: . Partly with tools 34 piecesThe technical data is manufacturer or operator information and is therefore notbinding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch teamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

degree: 220 working heigth: . mmlength: . mmThe technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch teamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: . lfeed pressure: . barcoolant capacity: . lThe technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch teamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 3000 mmwidth: 100 mmheight: 260 mmThe technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch teamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8171 Type: UDARA 10 Producer: WMW Created: GO 2019 Parameters: Wire diameter: 3-8 mm Cable length: 150-3000 mm Input power: 7.5 kW Machine weight: 1200 kg

Bous Cleaning system degreasing - The Bous Trowamat RL 200 CP V is a compact and efficient cleaning system designed for cleaning and degreasing smaller concrete tools and equipment, such as hand trowels, floats, and other handheld construction tools. It is part of Bous GmbH´s line of cleaning machines, which are widely used in the construction industry for maintaining and prolonging the life of equipment. Find more here - / Contact us at -

length: 10200 mmwidth: 3400 mmnumber: 6 Thickness: 350 mmT-slot - width: 36/60 mmT-slot - distance: 235 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mPanel consists of 8 panels Size per panel 3500x1750x350Number of T-slots per panel 7 pieces Total 49 m²The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8160 Type: VWL 1200 Producer: MSA Created: 2015 Parameters: Axis X: 1300 mm Axis Z: 1000 mm Max. spindle speed: 500 1/min Inner diameter: 250-1400 mm Number of axes: 3 Length: 3800 mm Width: 3390 mm Height: 4400 mm Weight: 12000 kg

! KNIFE RETURNS! Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1300 mm, H=1240 mm two-tone powder-coated Housing : black-grey structure (RAL 7021) Extracts : black-grey structure (RAL 7021) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 475 kg As a set approx. 33 lfd meters of bending tools fully assembled. Available in different sizes and with many accessories!

! KNIFE RETURNS! Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1300 mm, H=1240 mm two-tone powder-coated Housing : black-grey structure (RAL 7021) Extracts : black-grey structure (RAL 7021) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 475 kg As a set approx. 33 lfd meters of bending tools fully assembled. Available in different sizes and with many accessories!

! KNIFE RETURNS! Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1300 mm, H=1240 mm two-tone powder-coated Housing : black-grey structure (RAL 7021) Extracts : black-grey structure (RAL 7021) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 475 kg As a set approx. 33 lfd meters of bending tools fully assembled. Available in different sizes and with many accessories!

Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1300 mm, H=1240 mm two-tone powder-coated Housing : black-grey structure (RAL 7021) Extracts : black-grey structure (RAL 7021) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 475 kg As a set approx. 33 lfd meters of bending tools fully assembled. Available in different sizes and with many accessories!

Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing : gentian blue structure (RAL 5010) Extracts : grey-white structure (RAL 9002) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 410 kg As a set, approx. 26 linear metres of bending tools are fully assembled. Available in different sizes and with many accessories!

! KNIFE RETURNS! Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing : gentian blue structure (RAL 5010) Extracts : grey-white structure (RAL 9002) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 410 kg As a set, approx. 26 linear metres of bending tools are fully assembled. Available in different sizes and with many accessories!