other metal working machines used for sale (11,451)

A vulcanising press with 4 shelves, it was purchased as a spare for the currently used one and has been standing unused since new, in total it has worked for us 0h. Model XL8-350T-700x700x4 l´LC Pressure 350T 700x 700mm thickness 6()mm Hotplate resistance Ra:,I .6a (2.5 μm) - Type of heating electr. Max. temperature 200 ‘C Pressure on workplate approx. 7 I kg-´cm2 piston diameter I 600mm -f 500mm Hydraulic pressure 16Mpa Machine structure Ko1umno,-a Motor power .of hydtaulic station ,- 5.5kW Heating power for J..ai:d working plate 9 x 0.9kW= 8.lkW Weight p,-assembly approx. 12000 g Press dimensions : Approximately 2800x I 200,´350Chnin Find more here - / Contact us at -

Sharpening machine Vollmer CAL 300 Left hand machine Specifications: Blade width: 100-420mm Blade length: from 8500mm Blade thickness: up to 2.8mm Tooth pitch: 20-120mm The height of the teeth up to 40mm Angle of attack up to 40 degrees Abrasive disc diameter: 300m Working speed 5-30 teeth/min Power 5.4 kVA/ 4.8 kW Weight approx 1600 kg Accessory: Oil vapor exhaust and filtration system Vollmer N170 emulsion filtration system Auxiliary feed for large blades Find more here - / Contact us at -

DOOSAN LYNX2100LMB (installed new in 2021). Model: LYNX 2100LMB Power Connection: AC 380V, 3-phase, PE, 50/60 Hz Rated Power: 27.07 kVA Interruption Capacity: 5 kA Full Load Current: 41.14 A Short-Circuit Capacity: 10 kA Control System Output: L22SYH404A05 Weight: 3000 kg Manufacturing Date: November 2020 (2020.11) Machine has the following list of toolholders ; A. Turning Holder - OD Tool Holder (Right & Left) - Quantity: 2 pieces - Face Tool Holder (Right & Left) - Quantity: 1 piece - Double OD Tool Holder (Right) - SUB- Quantity: 1 piece - Cut-off Tool Holder (Right Hand) - Quantity: 1 piece B. Boring Holder - ID Tool Holder - Quantity: 2 pieces - Triple ID Tool Holder - Quantity: 1 piece - U-Drill Cap - Quantity: 1 each C. Milling Tool Unit - Straight (Short) - Quantity: 2 pieces - Angular - Quantity: 2 pieces D. Tool Sleeves - Boring Sleeves (Main) - Quantity: 1 ki ...

DOOSAN LYNX2100LSYA (installed new in 2021) Model: LYNX 2100LSYA Power Connection: AC 380V, 3-phase, PE, 50/60 Hz Rated Power: 37.43 kVA Interruption Capacity: 5 kA Full Load Current: 56.87 A Short-Circuit Capacity: 10 kA Control System Output: L220SYH840A05 Weight: 4150 kg Manufacturing Date: November 2020 (2020.11) Machine has the following list toolholders ; Turret Type (Mechanism/Station): Servo/24ST Holder Mounting Type Tool Size (Turning/Boring): BMT-45P 20/32 mm Tooling Parts Detail A. Turret Head/Tool Table - - Quantity: 1 ea B. Turning Holder - OD Tool Holder (Right & Left) _MAIN - Quantity: 1st - Face Tool Holder (Right & Left) _MAIN - Quantity: 1st - Double OD Tool Holder (Right & Left) _MAIN/SUB - Quantity: 1st - Double OD Tool Holder (Right & Left) _MAIN - Quantity: 1st - Double OD Tool Holder (Right & Left) _MAIN - Quantity: 1st - Double OD T ...

Monforts DNC5 CNC Lathe for sale. control unit: Siemens 810D Find more here - / Contact us at -

DMG MORI Machining Center Type: M1 Year of Manufacture: 2020 Maximum Spindle Speed: 12,000 revolutions per minute (rpm) Maximum Table Load: 5800 kg Power Supply Requirements: - Power Consumption: 20 kVA - Maximum Current: 35 A - Voltage: 400 V (±10%), 50 Hz - Maximum Short-Circuit Current: 0.40 kA Other Electrical Specifications: - AC Voltage: 400 V - DC Voltage: 230 V / 24 V CE Marked Find more here - / Contact us at -

Bar feeder LNS Quick load Servo 3 for sale. Find more here - / Contact us at -

Manufacturer: KOVOSVIT Model : VO 50 Year of Manufacture: 1995 Condition: Used Weight (Kg): 4300 kg Find more here - / Contact us at -

2016 HR(RUDHOLZER) Warmnietanlage Plastic welding machine Dedicated equipment for JQ specific process, machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities. Find more here - / Contact us at -

a Plasma Cutter for sale, 70A source, 2500 x 1250 CNC bed 2021 Mantech Phantom P26 The machine is a Mantech Phantom P26, please note that it is running a 70CT GYS powersource rather than Hypertherm. The machine was new in July 2021 and has had only light use, it is essentially in as new” condition. It has touch screen control / windows PC. Power requirement is TWO 32A Class D sockets, plus gas (we run on dry refrigerated air) Find more here - /

hydraulic guillotine shear hydraulic CNC guillotine shear with few operating hours and in perfect condition, The Durma VS 4020 is a machine designed for sheet metal processing, specifically a laser cutting machine. Here are some details about the Durma VS 4020 machine: - Laser Cutting Technology: The Durma VS 4020 utilizes laser cutting technology, which is a highly precise method for cutting various types of sheet metal materials. Laser cutting is known for its speed, accuracy, and versatility in creating complex shapes and designs. - Working Area: The "4020" in the model name typically refers to the working area of the machine. In this case, the Durma VS 4020 has a working area of approximately 4000 mm x 2000 mm (or 4 meters x 2 meters). This ample working area allows for the cutting of large sheets of metal. - Laser Source: The machine is equipped with a laser source, which can va ...

2008 KRAUSS MAFFEI 650-1000-520 CZ Injection moldin machine Machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities. Find more here - / Contact us at -

2008 KRAUSS MAFFEI 650-1000-520 CZ Injection moldin machine Missing electrical and mechanical parts. Find more here - / Contact us at -

2008 KRAUSS MAFFEI 420-700-520 CZ Injection moldin machine Machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities Find more here - / Contact us at -

Control: Mazatrol Fusion 640M Technical data: X-axis: [mm] 1740 Y-axis: [mm] 760 Z-axis: [mm] 660 Max. speed: [1/min] 10.000 spindle motor: [kW] 15 tool holder: SK 40 tool places: 30 Equipment: Chip conveyor No internal cooling (IKZ) Find more here - /

Find more here - / Contact us at -

2008 KRAUSS MAFFEI 175-520-390 CZ Injection moldin machine Machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities Find more here - / Contact us at -

Two group sander ideal for deburring, rounding edges and obtaining a perfect finish, thanks to the initial abrasive belt for removing excess burr and a carousel group with 8 abrasive brushes that rotate both clockwise and counterclockwise for a uniform result on the whole piece. The perfect machine for an excellent finishing quality. Independent control of the work groups via electronic touch screen panel, variable speed of the groups for a better finishing result. Table with vacuum system to guarantee the seal of the piece during processing. Quick release system for changing brushes and belt. The staggered arrangement of the brushes means allow that during the rotation the piece is always processed all over. Also suitable for processing surface treated material. Technical Specifications: - Working Width: 1350 mm - Abrasive Belt Speed: 1370 mm x 2200 mm - Abrasive Brush Dimensions: 300 ...

Very agile machine made in Japan. Even faster than Robodrill for in tooling. MECTRON 3-axis machining centre type MTV E 210 (year 2010) Agile high power machine for fine tooling Made in Japan. It is faster than Robodrill, more tools. X/Y/Z travels 250/250/250 mmpositioning precision 0,003mm repatible +/-0,002mmmax. feed 36m/min @ 1,0g table size 400/300mm, spindle nose 100 - 350mm of tablemax load on table 80kg HSK E 25 spindle, max 30000 UminRigid Tapping 8000/min30x tool changermax tool D30x100 SINUMERIK 840DSL controlmax. program memory 2MBabsolute position detection COMPCAD, Slope processing, Rigid tapping, Circular interpolation, Measuring function, Polar coordinates interpolation, Background editing, Macro, G10, USB, backslash compensation, canned cycleNC Options: Ethernet, 4th axis, cylindrical interpolation, tool life management, 2nd measurement function, position monitoring func ...

Machine type : Flame cutting system Manufacturer: ESAB Model : SXE-P1 4500 RH Year of manufacture : 1999 Dimensions, Weights, and Power Supply: - Track Height: 500 mm - Track Length: 14,000 mm - Cutting Length: 12,000 mm - Cutting Thickness: 150 mm - Machine Height: 1,900 mm - Machine Length: 2,250 mm - Height of Cutting Table: 700 mm - Machine Width: 5,270 mm - Cutting Width: 3,000 mm - Maximum Machine Speed: 12,000 mm/min - Machine Weight: 2,500 kg - Maximum Number of Single Torches: 2 x 381 + 1 - Fuel Gas: Acetylene - Voltage: 230 V / 50 Hz - Power Consumption: 2 KVA Find more here - / Contact us at -

2013 SAR/SEPRO SR 5X-35HL S5 TRANS Injection robot Machine where functional before conservation, obsolete robot version, retrofit could not be done. Find more here - / Contact us at -

2016 SAR/KUKA R/SCHS/GR/ETI/UST/MED/FB/HBG/BAS Injection robot Machine was functional before conservation, obsolete robot version, retrofit could not be done. Find more here - / Contact us at -

TOX pressotechnik CBM 004.025.001.a.007 Find more here - / Contact us at -

2008 SAR/KUKA R/SCHS/GR/ETI/UST/MED/FB/HBG/BAS Injection robot Machine was functional before conservation, obsolete robot version, retrofit could not be done. Find more here - / Contact us at -

CNC lathe Type: BNA-42 DHY Manufacturer: Citizen/Miyano Year:2011 Control: Fanuc Hours: 23240 Number of spindles: 2 Number of turrets: 2 Number of c-axes: 2 Number of y-axes: 1 Bar diameter (max): 42 mm Max turning length: 150 mm Main spindle Spindle revolutions (max): 6000 rpm C-axis: yes Counter spindle Spindle revolutions (max): 5000 rpm C-axis: yes X1 axis: 140 mm Z1 axis: 235 mm Y axis: 70mm(±35) X2 axis: 140 mm Z2 axis: 360 mm Number of tool positions (total): 14 Rotation speeds (max): 5000 rpm Mains power supply: 31 kVA Mains voltage: 400 V Mains frequency: 50 Hz Dimensions: 2240 x 1450 x 1660 mm Total weight approx.: 3100 kg Bar feeder IEMCA Boss 552 HD Machine in good condition, under power Find more here - / Contact us at -

Laser cutting machine Type: Platino Fiber Manufacturer: Prima Power Year: 2018 Hours machine on: 15000 Hours laser on: 8200 Laser: 4000 W Machine in good condition, under power Find more here - / Contact us at -

Type of Machine: Bar Machining Center Condition: Used Year of Manufacture: 2008 Power Supply: 3-Phase, 400 V, 50/60 Hz Current: 24 A Compressed Air Requirement: 6 bar Processing Speed: 21,000 1/min (RPM) Find more here - / Contact us at -

he KARG 2/S is a double twist bunching machine designed for the wire and cable industry. Manufactured by KARG, this machine is utilized for twisting multiple wires or strands together to form cables or bundles, a critical process in cable production. In the context of a 2000 KARG II-S, it is likely a model from the year 2000, serving a similar function in the wire and cable manufacturing sector. For detailed specifications and capabilities of this specific model, consulting the manufacturer´s documentation or contacting them directly would provide the most accurate information. The following accessories are available: Gear set shown in a picture for common lay lengths, see Excel file 7-fold roller set as used in the video On request, about 10 drawing dies made of carbide with signs of wear, which would first have to be reworked by the customer Operating instructions etc... We com ...

Manufacturer: VICI Designation: Optical Measuring Machine Machine Type: M909 (MTL TECNO) Year of Construction: 2022 Weight: 237 kg Electrical Supply: 230 V / 50 Hz Phases: Three-phase Included Components: - Computer System: - Fully configured computer - Pre-installed software - Security dongle for licensed software access - Accessories: - Computer Cabinet: Organized and compact for clean operations - Center Point Set: Includes interchangeable inserts for versatile measurements - Three-Jaw Precision Manual Chuck: Model PHSF 100 for secure and precise part holding Find more here - / Contact us at -

2017 Trumpf TruDisk2002 (FD24) A laser device with chiller in excellent technical condition Manufacturer: Trumpf Type: TruDisk 2002 (FD24) 380 V -10%... 460 V +10%, 3AC +PE 11,8 kW/12,6 kVA 18 A/400 V IP 54 50... 60 Hz July 2017 4/2LLK: 550/470 kg Icn/SCCR 13 KA Find more here - / Contact us at -