other metal working machines used for sale (11,451)

planing lenght: 525 mmtable surface area: 500 x 300 mmworkpiece height: mmdimensions of machine L x W x H: 1,98 x 1,06 x 1,42 mAccessories: vice (width of jaws 200 mm) on rotary plate, vertical shaping device, tool clearingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece diameter: 40 mmmin. workpiece diameter: 10 mmworkpiece length: 200 - 640 mmControl: SPS Siemens S5 95 U total power requirement: 25 kWweight of the machine ca.: 5 tdimensions of the machine ca.: mCondition: ready for operation: CE signed: Use: single shift: Condition: ready for operation: Electric 380 Volt: Bar feed and loader: 2 - 3,5 mHydraulic-device: 45 barCooling equipment: Central lubrication: Chip conveyor: Hydraulic cutting and double-end machining machine suitable for pre-machining trapezoidal thread spindles and other round workpieces in the form of sawing off the bar and double-sided end machining such as chamfering, countersinking and drilling with fixed parts and rotating tools.Machine consisting of:- Basic machine model TR 60/4-650, passage 640 mm- Bar magazine for bar lengths 2 -3.5 m- Normal version for solid material up to ? 40 mm- Central positio ...

x-travel: 4.300 mmy-travel: 1.500 mmz-travel: 1.800 mmControl: HEIDENHAIN TNC 530 table-size: 5.000 x 2.250 mmT-slots: 9 T-slot - distance: 250 mmT-slot - width: 28 mmrapid traverse: 15.000 mm/minfeeds: 10.000 mm/minmilling head: 45° Automatisch UAD milling head: 0,1 º- 0,1 º conus- taper: ISO-50 DIN 69871 AD-50 number of spindle speeds: 60 - 6.000 U/min/rpmtransmission ratio: 2 spindle drive: 28 kWInternal cooling system: 20 barchip conveyor: Inkl. handwheel: Inkl. total power requirement: 36 kWweight of the machine ca.: 40.1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 350 mm, 500 mm, 450 mm

CNC-controlled precision vertical slotting machine with four CNC axes and an electronic control of the rotary cutting table with a positioning accuracy of 0.001°. A machine for the efficient production of: - Fitting grooves (also conical grooves) -Splines - Internal and external gears -Racks CNC control with 10" color screen and touch screen software for roughing – finishing – fine finishing (This achieves surfaces of the highest possible grades.) Lifting range of the push carriage can be programmed up to 350 mm Push-slide speeds 0 to 80 strokes/min infinitely variable Push-slide swivel range +/- 20° Largest workpiece height 640 mm Projection 500 mm Round table size 450 mm Bore in the round cutting table Ø 135 mm Maximum table load 1,250 kg Table travels longitudinal and transverse – 340 x 340 mm Power transmission of the X + Y axis by precision ball screw ...

Programmable focusing optics Manufacturer: Trumpf Type: PFO 33-2 R1030-1070 HA Year of Make: 2017

H.E.F. HEF DURFERRIT salt bath nitriding line was built in 2001. This highly advanced production line makes it possible to improve the mechanical properties of the workpiece by increasing its strength and resistance to wear and corrosion. To achieve this, the workpieces undergo thermo-chemical treatment in the form of salt bath nitriding, which results in an anthracite or black colour and a surface hardness of up to 1300 HV. The H.E.F. HEF DURFERRIT thermo-chemical treatment line has been continuously serviced and upgraded throughout its service life. About 2.5 years ago, the lining and heaters were overhauled and the main nitriding ladle was replaced. It is also possible to purchase a new spare main ladle for the offered machine at an additional cost. The production line includes: – a ladle for washing/rinsing workpieces (3 pcs.) – plunge pre-heating furnace – SURSULF nit ...

Inv. Num. : 5805 Type:- Producer: EKOL Created: 2004 Parameters: Suitable for surface treatment of aluminium profiles with maximum dimensions of 3500 x 1350 x 600 mm Annual capacity: 20-25000 m2 Heating medium: Natural gas Equipment: KOS 2 x 6 x 20 Chamber Degreasing Machine Continuous dryer Transient 2 pieces Application cabin (suction capacity 10000 m3/h) Hardening furnace (4400 x 4400 x 3700 mm) Transport Demi-Water Production Wastewater Treatment Plant

Kramatorsk KJ 1910 10-meter boring depth - Heavy duty: 25-ton workpiece >>> NOTE: MACHINE IS IN OUR WAREHOUSE IN ITALY Heavy duty: Max. work-piece weight 25 tons Spindle motor kW 85 Counter rotation motor 90kW Spindle hole diameter mm 700 Max. boring diameter, mm 600 2z2p7f Center height over the bed, mm 670 Max. work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000...10000 Work piece diameter range, mm: - in chuck of faceplate 200...1100 - in open rest 400...900 - in closed rest 200...630 - in round rest 250...550 Spindle speeds range, rpm 2...200 Machine overall dimensions, approx mtrs 31 x 3 x 2,3 Machine weight, kg 90000 (approx) Machine in our wahouse (I-25064 Gussago - BS - Italy) tieflochbohrmaschine, taradeuse trous profonds

Inv. Num. : 7554 Type:- Producer: Staubli Created: 2016 Parameters: Maximum weight of the injection mold: 40,000 kg Cruising speed: 12 m/min Machine weight: 30,000 kg

amount: 1 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Oven OMIA SECOMAT V-10 Maxi temperature: 160° Internal dimensions: 1000 x 1000 x 1000 mm Equipped with 1 small trolley Voltage: 380 V Width: 2000 mm Depth: 1500 mm Total height: 2000 mm Weight: approx 1 T MACHINE IN VERY GOOD CONDITION

Automatic tapping machine Multitapper 1212 CoastOne - Made in Finland Demonstration machine Machining area: 1250x1250mm Thread sizes: M2-M10 Number of spindles: 3 (optionally 4) 2x tapping forming; 1x Sinking Drilling Station Micro-lubrication for each spindle / tool station Control: TC15 touch screen Numerical Input, Import of Punches - NC Files

weight: 4 tX - Y + Z-axis each: 410 mm kNcontrol: Fanuc Axis: 4 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

throat: 1410 mmworkpiece height max.: 1150 mmstroke: 1400 mmtable diameter: 1400 mmmilling-head swivable +/-: 10 ram - range of adjustment: 750 mmpulling power: 50000 Nworkpiece weight: 10000 kgRam stroke speed: 30 m/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

METRIS-NIKON MCA II 5124 measuring machine built in 2011 is a versatile device that can be used for measuring both small-sized objects as well as complex, large-sized parts. In addition, thanks to the computerisation of measurement procedures and its compact design, the machine can be used directly in the production environment or even inside the measured objects. The measurement process starts with an angular displacement of the arms to ‘pass’ through reference points. The operator then brings the machine’s measuring tip to the surface of the measured workpiece and validates the coordinates using a button located on the head. The coordinates are then transformed by the calculation procedures to the cartesian system (X,Y,Z), where they are used as the basis for determining the dimensions by approximation of the measured features and geometric figures, i.e. circles, cylinders and ...

amount: 1 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.