other metal working machines used for sale (11,469)

Temperature: 500 ° C Dimensions: Inside dimensions (WxDxH): 470 x 440 x 400 mm External dimensions (WxDxH): 850 x 600 x 730 mm Supply: 380 volts

Oven wild Barfield Temperature: 500 ° C Dimensions: Inside dimensions (WxDxH): 470 x 440 x 400 mm External dimensions (WxDxH): 850 x 600 x 730 mm Supply: 380 volts

vert. Internal broaching machine maximum tractive force: 10T Max stroke: 1000 mm Max cutting speed: 10.9 m / min Max reverse speed: 27.5 m / min Clamping surface: 400 x 400 mm Room set: 3 piece

No of nails manufactured: 900 pcs/min Min. diam. of wire: 0,7mm Max. diam. of wire: 1,4 mm

Ladies and gentlemen, Below you will submit a non-binding offer for a used 3.7 tonne arc furnace: Offer Arc Furnace we will send you our offer with technical data on a used standard system arc furnace 3.7 t All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of ...

Technical data: with T-slots Length: 1215 mm Height: 1600 mm Depth: 1000 mm

Technical data: with T-slots Length: 1215 mm Height: 1600 mm Depth: 1000 mm

Specifications: Length: 1015 mm Height: 810 mm Width: 600 mm

Specifications: Length: 490 mm Height: 800 mm Width: 400 mm

Technical Data: Length: 620 mm Height: 500 mm Width: 380 mm

.

Technical data: with stand, 50 Hz, DAB ED 25% Engine: 3 Capacity: 1.75 A Capacity: 736 W Voltage: 380 V

Technical data: Max load: 60 to. Container diameter: 500-4000 mm Rotation speed: 130-850 mm / min Roll diameter: 400 mm Roll width: 210 mm

Electric drive Type R 08-20 Flatbed truck BJ. 03/95 10500 hrs Ready to go with Allgäu charger battery see type plate Errors and omissions excepted!

STRIP WIDTH: MAX. 160 MM; THICKNESS RANGE: 0.5 - 3.0 MM, TUBE OD.: 12 - 50.8 MM, TUBE LENGTH: 3-6 M, TIG-TRICATHODE + LASER ROFIN SINAR 6 KW

Blacksmith hammer / air hammer Zeva machines 16 bear Air / forging hammer 16 bear Max 250 strokes/min Working cylinder diameter 90 mm Stroke approx. 170 mm CLOUT approx. 16 bear Anvil is connected to machine Ambosswerzeug can be changed CLOUT and Geschwindegkeit can be controlled with foot switch and hand 1.5 KW, 250 kg If you are interested in air hammers with 25Baer, 40Baer, 55Baer and 75Baer write me a short message!

Ram stroke: 750 mm Energy of full blow: 1840 kgm Quantity of stroke: 120 u/min Mass of anvil block: 12,5 t Mass of hammer with anvil block: 21,9 t

Mass of falling parts: 1000 kg Ram stroke: 800 mm Energy of full blow: 3600kgm Quantity of stroke: 110 Mass of hammer: 35t Year of production: 1974r.

- Hand & foot operation - integrated anvils - massive substructure - Hammer weight: 25 kg - Stroke: 250 rpm - Lifting height: 250 mm - Extension: 200 mm - Cylinder: 125 mm - Work shoehe: 765 mm - Engine power: 3 kW - Voltage: 400 V - Ground WxHxD: 460 x 1520 x 970 mm - Weight: approx. 670 kg

Cutting cutter Kjellberg-Eberle - used Type: SII20 Machine No.: 1331 - 220 V, 50 Hz, 2.5 kVA, IP 31 - on 04.02.1990 a new control system (NS 3003) was installed by Etek - Built in 1974 - 4 burners - Table dimensions: 6m x 2.50m - Total area: 6m x 5.5m x 2.4m In good condition!

1987, CAP.: 75,000 T/ANNUM, STRIP WIDTH: 250 - 1300 MM, THICKNESS: 0.2 - 2.0 MM, COIL WEIGHT: 10 T, SHEET LENGTH: MAX. 4.0 M, 2-ND LINE: CAP.: 30,000 T/ANNUM, STRIP WIDTH: 700-1300 MM, THICKNESS: 0.3-3.0 MM; COIL WEIGHT: 10 T, SHEET LENGTH: 4.0 M, SPEED: 20 M/MIN.,

Ladies and gentlemen, Below we can offer: Manufacturer: Make: 1 piece used continuous furnace, make: Safed Type: 11Bd40/24 Built: 2005 max. working temperature: 1100C Heating capacity: 60 kW Dimensions Length: 15,000 mm Usable width: 340 mm Useful height: 150 mm Heating chamber length: 2,380 mm Muffle, cooling channel new Prices and pictures on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty e ...

Aufspannflaeche 3,000 x 2,000 mms table height 1,150 mms

Various machines available.

We can offer several thread rolling machines with cylindrical dies, any size.

Gr. Pulling force: 16 to., gr. Stroke 1250 mm, Gr. Cutting speed: 5, 6 m/min Gr. Return speed: 30 m/min

Ladies and gentlemen, we may, on the basis of our general terms and conditions of delivery and payment for the trade in used machinery and equipment, offer you the following: Ladies and gentlemen, Offer: 1 piece br. Aluminium continuous casting plant, Make: SMS 3200 tons Price: € net, on request from the location. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection i ...

Ladies and gentlemen, Below you will submit a non-binding offer for a foundry plant: 1 piece br. Endogas production plant, make LOI natural gas-heated, with modern measuring/control and control system and modern KROMSCHRÖDER torches, solid top fittings, compressors with separate mounted shaft and separate motor, 100 Nm3/h in 3-stage version, power min. 35 Nm3/h The power can be reduced to 40 Nm3/h. The operation of the system can also be carried out in a 1-stage manner, so that the power can be reduced accordingly. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are ...

we can offer various wire pin presses, please ask for our list

with 3-jaw lining Röhm - 200 mm - 15 pitch