other metal working machines used for sale (11,464)

\"Test pin post 5–10 mm (5 individual sets)Richard Knauthe KGTGL 13620/ICylindrical measuring pinsstepped 0.05 mmComplete test pin lot consisting of five individual sets in the range of 5.00 mm to 10.00 mm.The sets cover the following ranges: • 5.00 – 6.00 mm • 6.00 – 7.00 mm • 7.00 – 8.00 mm • 8.00 – 9.00 mm • 9.00 – 10.00 mmEach set contains 21 measuring pins in 0.05 mm increments.Finish according to TGL 13620/I.Wooden boxes with signs of use. Measuring ranges: 5.00 – 10.00 mmGraduation: 0.05 mmTotal number of pins: 105 piecesStandard: TGL 13620/IManufacturer: Richard Knauthe KG, Limbach-OberfrohnaDesign: cylindrical gauge pins\" Auction-ID: A7-46417-289

\"Hogetex Universal Electronic Screw Measure 0-25 mm, IP54Universal Electronic Screw Measure for outdoor measurements in the range of 0-25 mm. Version with digital display and IP54 degree of protection. Supplied in a plastic case with accessories (adjustment dimensions, measuring inserts, tools, connection cable). Device in good condition with slight signs of wear. Scope of delivery: • Measuring screw 0–25 mm • Adjustment dimension • Set of measuring inserts (different geometries) • Tools • Connection cable • Case • Manufacturer: Hogetex • Design: Electronic Universal Micrometer • Measuring range: 0–25 mm • Reading: 0.001 mm • Degree of protection: IP54 • Display: Digital LCD • Functions: ON/OFF, SET, ABS/INC, UNIT, mm/inch switching • Measuring surfaces: interchangeable inserts • Power supply: battery • Storage: plastic case with foam insert\" Auctio ...

\"Mitutoyo Digital Screw Gauge 25–50 mm – 0.001 mm – IP54 – Type MDC-50JDigital Screw Gauge from the manufacturer Mitutoyo from the MDC series. The gauge covers the range of 25-50 mm and offers a high-resolution reading of 0.001 mm. The version is IP54 protected and therefore suitable for workshop use. The device is housed in the original Mitutoyo plastic case with insert. • Manufacturer: Mitutoyo • Type: MDC-50J / Item No. 293-286 • Measuring range: 25–50 mm • Resolution: 0.001 mm • Degree of protection: IP54 • Version: Digital, metric\" Auction-ID: A7-46417-213

\"Dial gauge iron-gauge / thickness gauge \"meswerk\" – 0.01 mm – in the caseof a clamp-on gauge with dial gauge from the manufacturer meswerk. The device is designed for thickness or comparison measurements and has an easy-to-read dial gauge with a 0.01 mm reading. Condition:Used, visually good with signs of wear due to age and storage. • Reading: 0.01 mm • Measuring principle: dial gauge, mechanical • Design: Iron-on gauge / thickness gauge • Manufacturer: \"Measuring instrument\" Auction-ID: A7-46417-212

\"Rathenow measuring microscope 30x – in a wooden boxmeasuring microscope / thread counter of the brand Rathenow with 30x magnification and lateral micrometer screw for fine adjustment. Device in wooden case with accessories as shown. • Manufacturer: Rathenow • Magnification: 30x • Version: Measuring microscope with integrated micrometer screw • Fine adjustment via scale drum • Eyepiece with diopter/focus adjustment • Supplied in a wooden box\" Auction-ID: A7-46417-315

\"Manufacturer: bedra / Welo / AGIEEDM wire / EDM wire – lots of 16 rolls (different types)Lot of a total of 16 rolls of EDM wire for wire EDM machines. The inventory comes from stock liquidation and includes several manufacturers and wire types. Most of the rolls are unused and in their original packaging, some in polystyrene protective boxes or original boxes. Some rolls are open, but without signs of use and are therefore to be regarded as unused stock goods. The lot includes brass EDM wires and galvanized EDM wires of various diameters. Manufacturers include bedra (Berkenhoff GmbH), Welo GmbH and AGIE. The sale is carried out exclusively as a complete lot with all existing roles as shown.bedra topas® plus • Type: TPLH/300 • Diameter: Ø 0.30 mm • Tensile strength: approx. 800 MPa • Length: approx. 33,600 m • Coil type: P15 • Manufacturer: Berkenhoff GmbHbedra betterbra ...

Tool presetting and measuring device from Zoller, smarTcheck series, with PC and monitor unit. Equipment / scope):Tool presetter with measuring opticsMachine base / base cabinetMonitor stand with 2 monitors, keyboard and mouseIntegrated industrial PCLighting and camera unitDocumentation and documentsCondition:Used. Visually well-groomed overall impression with usual signs of wear due to age and use. Machine was last in use. Software starts (see screenshot). Scope of delivery:Zoller smarTcheck completePC unit in the base cabinet2 monitors, keyboard, mouseDocuments / printoutsManufacturer: E. Zoller GmbH & Co. KGMachine: Zoller smarTcheckType: V400S-00083Serial No.: 876-0608/0Year of manufacture: 2006Power supply: 230 V / 50–60 HzPower: < 1 kVAPneumatics: 4–6 barSoftware: Zoller (Version 3.14.013, according to the display)PC: Zoller-IPC (Pentium 4, 2.4 GHz, 512 MB RAM, 40 GB HD ...

Working area: 1800 x 1000mm; dimension machine: 2600 x 2100 x 1200mm; automatic material feeder dimension: 2700 x 1200 x 1500mm; Auction-ID: A7-45992-140

Elotherm P1F die-sinking EDM machine, built in 1999, with CNC control and digital control panel. Machine with large working basin (basin size approx. 1900 × 1300 × 500 mm), control panel with integrated keyboard, screen and additional hand control unit (Elotrace). Extensive peripheral system with external filter technology: Franken Filtertechnik KG Type RF 70 Built in 1999 Volume 250 l Permissible operating overpressure 6 bar Permissible operating temperature 60 °C. Multi-stage filter unit, pump system and piping available. Integrated CO₂ extinguishing system with appropriate safety devices. Visible used condition with signs of wear due to age and duration. The system was in productive use in tool and mould making. Operating hours: 70,779.0h Auction-ID: 04D-XKW-4

Mitutoyo gauge block set – Grade 1 – BM1-122-1/PD – 122 pieces – in a wooden boxHigh-quality gauge set from Mitutoyo in accuracy class (Grade) 1, delivered in the original wooden box with a precisely fitting insert.The set is ideal for precision measurements, calibration tasks, QA departments, toolmaking and metrology.Condition:    •     ;Visually good, well-maintained condition    •    Slight signs of    wear possible due to age and use •    Calibration sticker available (07/2016)    •    Set is complete (empty spaces at the top left are intended for wear blocks)Scope of delivery:    •    Mitutoyo Gauge Block Set 122 pieces    •     ...

\"Length gauge 600 mm made of steel with wooden cassette (test equipment)Length gauge of steel with nominal dimension 600 mm for use as reference and adjustment dimension in metrology. • Nominal length: 600 mm • Design: one-piece final dimension • Material: steel • Application: reference and adjustment dimension • Standard / accuracy class: not specified\" Auction-ID: A7-46417-240

\"Mixed measuring equipment item consisting of various gauges, mainly feeler gauges, radius gauges, thread gauges and other test and measuring gauges. Manufacturer: • HOLEX • PROMAT • Wollschläger • otherCondition:Used.Different signs of use depending on the gauge (slight scratches, soiling). Partially unused (original packaging). • Feeler gauge sets (e.g. 0.05–1.0 mm / 0.05–2.0 mm, different numbers of blades) • Radius gauges (e.g. ranges 1–7 mm, 10–25 mm, 15.5–25 mm) • Thread gauges • Various single and folding gauges • Some original packaging available\" Auction-ID: A7-46417-207

\"Measuring tools – mixed workshop lotScope: Lot of 12 piecesManufacturer: mixed (including M&W / unknown, one measuring device MAC), partly without markingCondition: used, functional • 1 × universal protractor / gauge with scale (0–180°) in a case • 1 × magnetic measuring device / display device (MAC) in a leather case • 1 × caliper / depth caliper (older version) • 2 × precision stop angle (various sizes) • 1 × stop angle (large) • 1 × feeler gauge set (ring tied) • 1 × steel ruler / ruler • 1 × set of small stop angle in wooden box • 1 × small measuring gauge / accessories (blue packaged, probably new/unused) • Various measuring / test gauges and accessories\" Auction-ID: A7-46417-132

\"Manufacturer: Werth Messtechnik GmbHType / Model: Scope-Check 400 × 400 × 150 3D CNCMachine type: Multi-sensor coordinate measuring machine (optical / tactile) • Year of manufacture: 2006 • Serial number: 06-00376Condition • Used, well-maintained overall condition • Machine was in measurement operation until the end • Regular calibrations documented • No obvious damage to granite, guides or measuring systemAccessories / Scope of Delivery • Granite machine with measuring glass and cover • CNC control with scope controller • Renishaw pushbutton (several probe inserts available) • PC workstation with: • Computer • Monitor(s) • Keyboard, mouse • Control panel / joystick • Documentation: • User manuals (WinWerth) • Calibration and test protocols • Folder with machine and measuring room documentation • Software and calibration data carrier (CD/DVD) � ...

\"Industrial electric furnace from the former VEB industrial furnace construction Harzgerode. The furnace is designed as a vertical pot/chamber furnace and is suitable for thermal treatment processes up to 600 °C. Equipped with solid furnace body, swivel cover with drive, ceramic lining and separate control cabinet with temperature control (JUMO dTRON 304). Suitable for heat treatment, preheating, drying and tempering processes in industrial applications. Condition • Used • Furnace body complete and stable • Refractory lining present, age-related signs of wear • Lid mechanism and drive present • Control installed (function not checked) • General condition according to age and useScope of delivery • Industrial electric furnace VEB IKI Type 137 N/1 • Swivel lid with drive • Integrated oven pot • Control cabinet with temperature control (JUMO dTRON 304) • Manufacture ...

\"Caliper posts – 7 pieces – measuring range 0–300 mmLots of 7 mechanical calipers, each with a measuring range of 150, 200 and 300 mm. The calipers come from workshop/industrial stock and are mainly supplied in wooden or cardboard cases. • Measuring ranges: 150, 200, 300 mm • Reading: 0.05 mm / 0.1 mm (depending on the version, see pictures) • Type: mechanical / analogue (vernier) • Material: steel, stainless steel • Design: metric • Quantity: 7 pieces\" Auction-ID: A7-46417-224

Manufacturer: System 3RType: Clamping Plate / Grid PlateSystem 3R Clamping Plates Lots – 2 pieces (3R-935-56.40-02 / U-20034)Description:Lot consisting of 2 clamping plates for System 3R clamping systems.The plates have the typical 3R raster pattern for holding chucks, electrode holders and fixtures in tool and mould making. Suitable for use on die-sinking EDM machines and fixtures with System-3R mounting.Manufacturer: System 3RSystem: 3RType: Chipboards / Grid PlatesPlate 1Type: 3R-935-56.40-02Size: approx. 560 × 400 mmPlate 2Type: U-20034Size: approx. 350 × 250 mmMaterial: SteelCondition: used Auction-ID: A7-46417-402

\"Digital length comparison measuring device in axial design, consisting of a stable guide rod with measuring carriage and a digital Mitutoyo dial gauge. The device is intended for comparative measurements of length, step and distance measurements. The measurement is carried out axially against a reference measure, deviations are indicated via the digital dial gauge. • Type: Digital length comparison measuring device • Measuring principle: Axial comparison measurement • Guide rod with measuring carriage and spring infeed • Clamping and adjustment elements integrated • Holder for digital dial gaugeDial gauge: • Manufacturer: Mitutoyo • Model: ID-C112B (code 543-250B) • Measuring range: 0–12.7 mm • Resolution: 0.001 mm • Absolute measuring system (ABS) • Functions: Zero position, preset, tolerance display, on/offDimensions: • Total length of the measuring device: ...

Height Gauge with Granite Measuring PlateManufacturer: MitutoyoType / Model: ID-C1050XB (code 543-494B)Condition: usedDigital Height Gauge from Mitutoyo, mounted on a solid granite measuring plate. The device is equipped with a digital dial gauge (ABS function) and is suitable for precise height and comparison measurements in the measuring room or in quality assurance. The measuring arm is adjustable, the column and guide are made of metal.Equipment / scope:    •    Granite measuring plate    •    Column with bracket •    Digital height measuring device Mitutoyo Measuring range / resolution:Measuring range dial    gauge: up to 50.8 mmResolution: 0.01 mm Dimensions:Granite measuring plate approx. 400 × 400 mm Total height approx. 52.5 mm Auction-ID: A7-46417-100

\"The measuring device has a digital display unit with data output. Serial number according to nameplate: 0002C49. The device comes in the original Mitutoyo wooden box. Due to the design, the measuring range is in the range of approx. 600 mm (U60 version). Digital display with zero and preset function. Visually, there are usual signs of wear Manufacturer: MitutoyoCode No.: 552-182Model: CFC-U60Origin: Made in JapanCondition: Used, visually good condition, in original wooden box\" Auction-ID: A7-46417-274

\"Gauge Block / Parallel Gauge Blocks - 87 pieces - Grade 2 - in wooden case - completeComplete Gage Blocks with 87 individual gauge blocks, neatly sorted in original wooden storage box.Condition • Gauge blocks with slight surface and handling traces typical of use, no chipping or recognizable damage to measuring surfaces • Wooden box with scratches due to age and use • All gauge sizes sorted appropriately and complete • Type: Parallel gauge blocks / gauge block set • Number of gauge blocks: 87 pieces • Accuracy class: Grade 2 • Reference temperature: 20 °C • Measuring range: • 1.001 – 1.009 mm • 1.01 – 1.49 mm • 1.5 – 9.5 mm • 10 – 100 mm • Material: Steel (classic version) • Serial/set number: LS 7121 • Condition: used, technically good, complete • Storage: sturdy wooden case with lock\" Auction-ID: A7-46417-155

\"Mitutoyo Digital Gauge 0–25 mm, 0.001 mmDigital U-Screw Gauge for external measurement in the range of 0–25 mm. Reading 0.001 mm. With ZERO button to set zero points. Device in used condition with visible signs of wear on the housing (including paint chipping and marking residues). Measuring surfaces optically in neat condition. Supplied in a plastic case with foam insert. • Manufacturer: Mitutoyo • Design: digital external measuring screw • Measuring range: 0–25 mm • Reading: 0.001 mm • Display: LCD digital • Functions: ZERO (zeroing) • Unit of measurement: mm • Measuring surfaces: carbide-tipped • Reference temperature: 20 °C\" Auction-ID: A7-46417-330

Measuring and scribing tools Lot of 13 piecesWith ATORN, Mitutoyo, PREISSER and othersMixed lot of 13 measuring and scribing tools for workshops, toolmaking and quality control.Included are a ATORN hair ruler 500 mm DIN 874/0 INOX, a Mitutoyo caliper 150 mm, a U-screw gauge with adjustment bracket, several precision angles as well as scribing tools and gauges. Auction-ID: A7-46417-294

\"Bundle of micrometers 0–50 mm – 7 parts – mechanical – used7-part bundle of mechanical micrometers for external measurements in the range of 0–50 mm. • Total measuring ranges: 0–50 mm • Reading: 0.01 mm • Type: mechanical • Version: metric • Scope of delivery: 7× micrometer\" Auction-ID: A7-46417-220

\"Bullet standards / test balls – 9 parts – incl. PTB calibration certificate, 9-part lot consisting of various ball standards and a PTB-calibrated solid ball.1 × solid sphere Ø 19.05396 mm • Material: steel • PTB calibration certificate available • Marking: PTB 01 • Storage box available • Diameter according to labeling: 19.05396 mmOther ball standards:1 × 3.000 mm (master ball, G28)1 × 3.175 mm1 × 3.969 mm1 × 4.762 mm1 × 5.556 mm1 × 6.350 mm1 × 10,000 mm • From measuring room stock • Well maintained storage in individual packaging • No current recalibration has taken place • PTB calibration certificate for 19 mm ball available (older date)\" Auction-ID: A7-46417-303

\"Precision measuring pin set 1.01–2.72 mmPaul Flüger (PF)Cylindrical measuring pinsWooden cassettePrecision measuring pin set in the range of 1.01 mm to 2.72 mm.Manufacturer Paul Flüger, Vielau near Zwickau (Saxony).Not 0.01 mm graduated throughout – apparently a combined range set at the factory. Measuring range: 1.01 – 2.72 mmDesign: cylindrical test pinsManufacturer: Paul Flüger (PF)Storage: \"Wooden box\" Auction-ID: A7-46417-291

\"Item Gauge Blocks – 2 Gauge Boxes (partly incomplete) + Single BlockLot Steel Gauge Blocks from Industrial Stock.Included:1x final measure box • 87 pieces • Grade 1 • Labeling: No. 150141 • Incomplete (see pictures)1x additional final measure box • Incomplete • Wooden box • Various small gradations availableLoose single final dimensions • Larger blocks including 16 mm, 20 mm • Several medium dimensions • Additional larger individual blocks outside the boxes • Several 200 and 250 mm blocks\" Auction-ID: A7-46417-313

\"RENISHAW TP200 Probe Set with Accessories and TestCertificate Complete probe set from RENISHAW consisting of a TP200 probe (SF MOD) including several M2 probe inserts (straight version, different lengths) and original transport case.The probe has been tested on the RENISHAW Probe Test Rig (Test Passed). A detailed test report / measurement protocol is included and documents the repeatability as well as the preferred movement (pre-travel). Condition / scope of delivery • Condition: used, very good • Probe tested, test passed • Probe inserts mostly new / unused (orig.packaging)Scope of delivery: • RENISHAW TP200 probe (SF MOD) • Several M2 probe inserts • Original case • Original test certificate / measurement protocol • Manufacturer: RENISHAW • Type: TP200 SF MOD + TP200 • Serial number: 4W9T83 • Stylus length (reference): 50 mm • Probing force: 2 g • Test spe ...

\"System 3R EDM Tooling Set – Art. 3R-901-20E / 3R-90°-01 – Made in SwedenSystem 3R Clamping and Tool Holder Set for EDM Machines.The set is in mint condition and comes from stock. Scope of delivery (4 packs):• System 3R base plates / tension strips• Angle plate / clamping bracket• 3R clamping brackets / mounting elements• Set of 3R collets (in the magazine)• Screwdriver / assembly tool• Accessories and fasteners1. System 3R base plate / tension stripManufacturer: System 3RType / Item no.: 3R-901-20ECondition: as good as new (stock)Description:System 3R clamping strip / base plate for the System-3R EDM clamping system. Precision component for holding and positioning electrode holders or workpiece holders on EDM machines. Origin: Made in SwedenScope of delivery:Base plate according to the picture.2. System 3R Angle Plate 90°Manufacturer: System 3RType / Item No.: 3R-90° ...

\"Lot of six unused analog dial gauges of the brand JIF (Chuan Brand). Fine pointer with measuring range 0–1 mm and high resolution of 0.001 mm, suitable for simple test and comparison measurements in workshops and training. Delivered in original plastic boxes incl. inserts. • Type: Dial Indicator • Measuring range: 0–1 mm • Resolution: 0.001 mm • Graduation: 0–100 • Design: Analog dial gauge • Origin: Made in China\" Auction-ID: A7-46417-251