other metal working machines used for sale (10,861)

2x Heraeus B 6200 Drying Oven / Heating Oven with Gas Flushing (Complete Set) The plant has an operational conversion with an external gas control system and internal distribution lances. This enables a controlled flushing (continuous purge) of the interior with inert gas. This drastically reduces the humidity and oxygen content in the process – ideal for oxidation-sensitive semiconductor processes, optics or electronic components. Manufacturer: Heraeus (Thermo Fisher Scientific Brand) Made in Germany Device Specifications (per unit): Interior volume: 196 l (total volume 392 L) Temperature range: RT +5 °C to 70 °C Dimensions outside (WxHxD): 895 × 816 × 715 mm Dimensions inside (WxHxD): 554 × 644 × 550 mm Weight: approx. 70 kg per unit (plus base) Power supply: 230 V. 50 Hz. 2.6 A. 0.6 kW Equipment & Scope of Delivery: 2x Drying oven Heraeus B 6200 Double Door ...

Punching machine TRUMPF TruPunch 5000

Trulaaser Fiber cutting machine 3030, working condition

PressBrake TRUMPF TrumaBend V850 L

PressBrake TRUMPF TrumaBend V850R

Pressbrake TRUMPF TrumaBend V130, 6axis

Key data: 1 C, 200 mm, 220 mm

Chamber furnace Nabertherm L5/11 with controller B170 Manufacturer Nabertherm. Made in Germany. Temperature max 1,100 °C. 2.4 kW. 230 V. Nabertherm muffle furnace with hinged door. Heating from two sides by ceramic heating plates Ceramic heating plates with integrated heating wire, Splash and exhaust gas protected, easy to replace. Insulation made of unclassified fiber material. Housing made of stainless steel structural sheets. Double-walled housing for low Outside temperatures and high stability. Adjustable supply air opening in the door. Exhaust air opening in the rear wall of the furnace. Low-noise operation of the heater with solid state relays. Internal dimensions (WxHxD): 200 x 130 x 220 mm. External dimensions (WxHxD): 390 x 385 x 460 mm. Volume 5 l. Internal NR 645-2 Areas of application & details: Laboratory Furnace, Muffle Furnace, High Temperature Furn ...

Key data: 1 C, 330 mm, 890 mm

Chamber furnace KKQ RX3-20-12 up to 1,200°C Rivet Heating Furnace Furnace combustion chamber opening: 330 mm x 300 mm. Combustion chamber depth of the steel box: 800 mm. The dimensions refer to the removable steel box. The actual combustion chamber is 580 mm wide, 440 mm high and 890 mm deep. Dimensions of the chamber furnace including attachments: Width 153 cm x depth 165 cm x height 155 cm. Weight: 1,130 kg. No shipping, only pickup. Equipment & Features: Very large and deep combustion chamber of 227 liters for workpieces and batches. Robust industrial design. Removable steel box (muffle insert/glow hood). Ideal for metalworking, heat treatment and forging Areas of application: Workshop, ceramics, metal, materials testing, metalworking, materials engineering & metallurgy, burning & sintering, hot riveting, heating of steel rivets, forging preheating, forging. Used  ...

OMAG / AFFRI 903 RSD Hardness Testing Machine Professional stationary benchtop hardness tester from the renowned Italian manufacturer OMAG di AFFRI DAVIDE s.r.l. (model 903 RSD). The device has been regularly tested and certified by the DAkkS-accredited laboratory 3-Rath Calibration + Testing Technology (last test on 28.04.2025 for the HRC procedure according to DIN EN ISO 9000ff). Technical data: Manufacturer: OMAG / AFFRI Group (Italy) Model: 903 RSD Serial Number: 76599 Test method: Rockwell (HRC calibrated, among others) Voltage: 115 – 230 V Weight / Test force: 195 Kgf Special feature: Height-adjustable probe for flexible workpiece sizes "Everything from a single source: We will be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de More items - new and used - can be found in our shop! International shipping costs  ...

Key data: 1400 C

Chamber furnace Nabertherm LH 60/14 with controller P300 Manufacturer Nabertherm. Made in Germany. Tmax 1,400°C. 12 kW. 400 V. Volume 64 l. Heating capacity 12.0 kW Mobile undercarriage. Dimensions: Inner dimensions oven (WxHxD): 400 x 400 x 400 mm External dimensions oven (WxHxD): 790 x 1370 x 1080 mm External dimensions frame (WxHxD): 1300 x 1160 x 825 mm Clear space in the frame (WxHxD): 1100 x 1065 x 825 mm Weight (oven): approx. 300 kg (plus base) Equipment & Features: Insulation: Multi-layer construction made of high-quality, durable Lightweight refractory bricks (LH model). Heating: 5-sided heating (from all sides and from the floor) for excellent temperature uniformity. The heating elements are protected on support tubes. Controller P300: Convenient digital program control for precise heating profiles and holding times. Accessories: Including robust, m ...

Esta Chip Suction-SB 8151 Chip Suction Powerful industrial extraction system from the quality manufacturer ESTA, model Spänesaug-SB 8151. The system is ideal for workshops for the extraction of chips and dusts (e.g. in metal or woodworking). Technical specifications of the device Manufacturer: ESTA Apparatebau GmbH & Co. KG Model / Type: Chip suction-SB 8151 Voltage (volts): 400 V Power (kW): 2.2 kW Current (amps): 4.6 A Frequency (Hz): 50 Hz Degree of protection: IP 54 (dust and splash proof) More items - new and used - can be found in our shop! International shipping costs on request!

A complete electrically heated Hindenlang bale-out furnace system for melting and holding aluminium is offered. Design: stationary, heating shell material: vermiculite, Heating capacity: 45kW, melting capacity: approx. 90kg/h, operating temperature: 720°C, max. temperature: 850°C, furnace chamber temperature limit: 950°C, crucible holder: BU-200/BN-200, crucible support height: 65mm, weight: approx. 1100kg without crucible. Equipment: furnace housing with insulation and meander heating elements, lateral emergency drain, temperature monitoring, switchgear rated up to 80A/55kW, crucible breakage detection system, freeze protection, timer, connecting cables, BU-200 crucible and crucible support. Documentation available. An on-site inspection is possible.

table length: - mmtable width: - mmampere: - A: für MK3 total power requirement: - kWweight of the machine ca.: 4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 1500 kgserial number: FGA04-1290-00480 drive: Treibgas weight: 2800 kglength in width: 940 mm: ca. 2.060 mm (je nach Mas engine output: ca. 34 kW kWcubic capacity: 1.975 cm³ ccmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: - mmtable width: - mmampere: - A: für MK3 total power requirement: - kWweight of the machine ca.: 4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre distance: 900 mm: 440 weight of the machine ca.: 3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC vertical machining center Type: VF-3YT Manufacturer: Haas Year: 2012 Control: Haas Hours: 22034 X: 1016 mm Y: 660 mm Z: 635 mm Table: 1372 x 610 mm Max table load: 1588 kg Spindle cone: CT40 Tool magazine: 20 positions Machine weight: 5700 kg Chip conveyor Tool and work probe In good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

5-axis CNC machining center Type: UMC-750 Manufacturer: Haas Year: 2016 Control: Haas Hours: 2830 X: 762 mm Y: 508 mm Z: 508 mm Tool magazine: 40 positions Spindel taper: ISO 40 Chip conveyor Machine in good condition, fully functional, under power. Find more here - .ucymachines/ Contact us at - sales@ucymachines

This 3-axis Wenzel LH 87 CMM machine was manufactured in 2018. It features a measuring range of 800 mm in the X-axis, 1,500 mm in the Y-axis, and 700 mm in the Z-axis. The machine is equipped with advanced software modules, including WM Quartis GEO and WM Quartis SCAN, ensuring high-quality measurement capabilities. If you are looking to get high-quality measurement capabilities, consider the Wenzel LH 87 CMM machine we have for sale. Contact us for further details.

- Max. bar length 3,200 mm - Guide channel (oil-damped) - Included guide channel: D 36 mm - Material slide length LL - Centering - Synchronous device - last attached to CITIZEN M332 - Weight approx. 900 kg - Dimensions LxWxH 4,000x700x1,200 mm

The facility includes a comprehensive range of production and support equipment, including: 4 Cold Rolling Mills (4Hi & 2Hi) – including tandem rolling lines with speeds up to 500 m/min, processing strip widths from 4–100 mm and thicknesses from 0.4–4.5 mm. 9 Annealing Furnace Units – stretch and batch furnaces operating with nitrogen and hydrogen atmospheres, with temperatures up to 1,000°C. Inspection, NDT & Finishing Lines – including eddy current inspection, surface grinding, shaving, and coil-to-bundle conversion. 2 CRM Work Roll Grinders (WMW, Germany) – together with blanking lines capable of producing up to 240 hacksaw blanks per minute. Laboratory & Auxiliary Equipment – including tensile testing equipment, optical microscopes, compressors, punch presses, and other supporting machinery. In combination lot, but also available for individual pu ...

Measuring Microscope Hitec QZW 1

Emergency exit sign, escape route light, emergency and escape route lighting, emergency lights, escape routes, emergency lighting -Manufacturer: Ceag, Cooper Safety LED emergency exit sign with 3 pictograms, unused, original packaging -Type: SV EURO 1-3/D -Connection: 230 V -Cardboard dimensions: 360/220/H110 mm -Weight: 1.8 kg

Manufacturer: Neff Model: DZP630 Type of machine: Press Year of manufacture: 2020 Press force: 630 t Counter press force: 250 t Opening max: 1200 mm Press movement max: 800 mm Counter movement max: 250 mm Counter press area: 1500 x 1200 mm Press area: 1800 x 1500 mm Counter press pins diameter: 38 mm Operating Hours : 5,935 hours since February 2020 Find more here - .ucymachines/ Contact us at - sales@ucymachines