lathes used for sale (3,003)

The machine is in very good technical condition, testing is possible by prior arrangement.

GENERAL Project No.: 905832 Quantity: 1 pcs. Manufacturer: TRAUB Type: TNL 20 - 9B Control: Traub TX 8i-s Year of Make: 2022 Condition: Used machine Approx. (hrs): 33180 Program run approx. (hrs.): 16914 DESCRIPTION TURNING Max. turning diameter 20 mm Max. speed main spindle 10,000 1/min Spindle aperture main spindle 20 mm Axes on the main spindle unit C Max. speed sub-spindle 10,000 1/min Spindle passage sub-spindle 20 mm Axes on the sub-spindle unit X/Z/C Tool carrier at the top Number of stations 8 Axes X/Y/Z/H/B Bottom Tool Carrier Number of stations 8 Axes X/Y/Z/H Residual apparatus Number of stations 4 OTHER EQUIPMENT Tool breakage monitoring Splash protection cladding with fully encapsulated working area Lighting in the work area Oil/Emulsion Mist Extraction System Hinge belt chip conveyor Engine is/was operated with oil Co ...

Key data: 5000 mm, 8000 mm, 4000 mm

Berthiez Vertical Turning Lathe • Year of manufacture: 1982 • CNC type: older system (CNC axes) Dimensions and Working Parameters • Table diameter: 5000 mm • Maximum turning diameter: 8000 mm • Maximum turning diameter at center: 5000 mm • Maximum workpiece height: 4000 mm • Ram travel (T): 3600 mm • Saddle travel (TA): 650 mm Speed and Power • Table rotation range: 0.6 – 60 rpm • Table motor power: 140 kW • Maximum load on hydraulic support: 160 t • Ram feed speed: 400 mm/min • Saddle feed speed: 2500 mm/min • Spindle rotation for milling: 0.01 – 0.50 rpm • Positioning speed: 0.001 – 0.50 rpm Tool Carriages 1. Hand-Operated (Primary) Carriage • Kulannum section size: 360 × 360 mm • Axial travel (CA): 2500 mm • Horizontal travel (CB): 3400 mm • Tilt range (E-F): 15° – 45° 2. Side Tool C ...

1 L + Z lathe Make: Stanko Model No.: 1M-63B Year of Make: 1988 Technical details: Turning diameter over bed: 700 mm Turning diameter over support: 350 mm Turning length: 3000 mm Peak height measured in bed: 320 mm Bore of the working spindle: 70 mm Spindle speed max.: 10 - 1250 / 24 step rpm Cross feed: 0.0256 ... 0.378 mm/rev Longitudinal feeds: 0.064...1.025 mm/rev Tailstock quill adjustment:: 240 mm Tailstock mount MK: MK5 Total power requirement: 14.0 kW Machine weight approx.: 5.0 t Travel support: Support longitudinal=3000mm Support transverse=400mm Tool support=220mm Tool carriage can be swivelled 90° right/left Equipment / Accessories Rapid traverse Machine Lamp Coolant device with pump 2x Bezel 3-jaw chuck

Table size 2400 mm Max turning diameter 2500 mm Max. workpiece height 1600 mm Max. workpiece weight 12000 kg Machine weight 54320 kg

Key data: 376 mm, 760 mm

Description CNC turning-milling center Doosan Puma 2600 SYII with Fanuc control i series with accessories The machine has been used little, has about 2000 hours of operation so like new and is available now Additional Accessories Lathe Doosan Puma 2600 SY II -2 tool holders for external turning tool 25x25 -1 tool holder double for external turning tool 25x25 -1 tool holder for frontal machining 25x25 -2 tool holders for internal turning tools (boring rods) diameter 50mm -1 tool holder double for internal turning tools diameter 32 mm -1 tool holder for parting tool -1 tool holder double right for external tool (sub-spindle) -1 tool holder double left for external tool (main spindle) -4 motorized tool holders ER-32 radial (X axis) -5 Motorized Tool Holders ER-32 Axis (Z Axis) -1 motorized tool holder ER-32 radial (X axis) with internal coolant supply -1 motorized tool hold ...

Control Siemens 840 Dsl Main spindle: Motor spindle technology Speed 6,000 rpm Power (max.) 20 kW Bar passage 65 mm Workpiece Clamping Collet Chuck, Hainbuch Clamping Top Modular Size 65 Tool carrier I (X/Z): Technology Turret with 8 stations Tool holder VDI25 Tool drive 6,000 rpm, 4.2 kW, 10 Nm Complete machining synchronous spindle with 3-jaw chuck, ø95 mm Travel in X/Z 90/280 mm Rapid traverse in X/Z 27/36 m/min Tool carrier II (X/Z): Technology Turret with 8 stations Dovetail tool holder Tool drive 6,000 rpm Travel in X/Z 81/80 mm Rapid traverse in X/Z 27/36 m/min Residual apparatus: Technology Rear Drilling Facility with 5 Stations Powered tools 2 stations Tool drive 6,000 rpm Equipment/accessories: Chip Management Chip Conveyor Coolant supply KSS pump with high pressure, 20 bar Raw material feed short bar loader, Breuning Irco ILS-MUK 7012 III R ...

Lathe Böhringer DUC 560 BJ 1995

CNC milling turning center OKUMA Multus B400 TECHNICAL FEATURES: Year: 2007 NC Type: OSP-P200L Distance between points: 1500 [mm] Maximum diameter Turning time: 710 [mm] Permissible diameter above the carriage: 710 [mm] X-axis travel: 690 [mm] Y-axis travel: -115 / +115 [mm] Z-axis travel: 1545 [mm] W-axis stroke: 1550 [mm] B-axis indexing accuracy: 0.001 [°] Maximum rotational speed Milling spindle: 6000 [rpm] Maximum power Milling spindle: 11 [kW] Maximum torque Milling spindle: 65.7 [Nm] Coolant milling spindle: HSK-A63 Tool magazine capacity: 40 Maximum length Tool Size: 300 [mm] Maximum diameter Tool No.:130 [mm] Maximum weight per tool: 10 [Kg] X-axis fast feed speed: 4000 [mm/min] Z-axis fast feed speed: 40000 [mm/min] Y-axis fast feed speed: 26000 [mm/min] W axis fast feed speed: 12000 [mm/min] Spindle Nose: JIS A2-8 Minimum speed. Spindle: 38 [rpm]  ...

The machine is in good technical condition, after prior agreement it is possible to test it. with Fanuc Oi-TC control and accessories. - maximum turning diameter: 500 mm - maximum turning length: 1200 mm - clamping head 100 mm - swing diameter over the bed: approx. 700 mm - max. spindle passage bar diameter: approx. (75-105 mm) - chuck size: 15" - LM driven tools with milling function (C axis), driven tool motor 7 hp - spindle motor 30 hp - number of tools in the turret 12 VDI - 3-jaw chuck - chip conveyor

The machine is in good technical condition, testing is possible by prior arrangement.

1 x Schaublin 102 spindle for push clamps type F38, incomplete for spare parts 1 x Schaublin nut for F38 spindle nose, in good used condition. 1 x 8 F38 Clamps Diameter:14 - 15 -16 -17 - 18 -20 - 31 - 30. In very good condition, a new clamp (diameter 15), one used (diameter 16), one with traces of storage (diameter 18). 1 x Spindel Schaublin 102, für Druckspannzangen F38, unvollständig, für Ersatzteile. 1 x Mutter für Druckspannzangen Schaublin F38. 1 x 8 Druckspannzangen F38. Durchmesser: 14 - 15 -16 -17 - 18 -20 - 31 - 30. Durchmesser 15 mm ist neu ungebraucht, Durchmesser 16 mm sehr gebraucht, Durchmesser 18 mm mit Lagerspuren.

Key data: 254 mm, 700 mm

Turning milling center Manufacturer: DMG Mori Type NLX 2500/700 Control M730UM Mitsubishi with Celos Turning length 700mm 12 tool stations, all 12 of which are driven Y-axis Bar passage 91mm Program runtime Head1 4036h Cumulative cutting time Head 1 2058h Machine running time 8605h Bar loading magazine TOP Automazioni 3m Incl. tool package NP 64.000 euro Machine is in TOP condition

The machine is in good technical condition, after prior agreement it is possible to test it. It was put into operation in 2012 with the HEIDENHAIN iTNC 530 control system, including a chip conveyor and a cutter head (8 positions). The machine is fully functional and runs without complications, serviced regularly, originally directly by the KOVOSVIT company and after its demise by the VOPSS company.

Horizontal turning machine manufactured in 2014. These EMCO TURN E25 features a maximum turning diameter of 85 mm and a turning length of 225 mm. Includes a VDI 16 disk turret with 12 tool stations and a maximum chuck size of 100 mm. If you are looking to get high-quality turning capabilities, consider the EMCO TURN E25 machines we have for sale. Contact us for further details. 2 units available.

Horizontal turning machine manufactured in 2008. This Weiler E70 / 2000 features a swing over bed of 720 mm and a maximum workpiece weight of 2,500 kg. It includes a steady rest, tailstock, and faceplate, providing versatility for various applications. With a spindle speed range of 1 – 1,800 rpm and a robust main drive power of 37 kW, this machine is designed for precision. If you are looking to get high-quality turning capabilities, consider the Weiler E70 / 2000 machine we have for sale. Contact us for further details.

- Complete machining with twin spindel, upper and lower turrets- Kitagawa 3 chuck left and right- Tool holders with driven tools axial and radial- Large jaws cabinet with inserts- OGL Gantry loader with ca 10 Kg load capacity- Chip conveyor- Paper Filtration Pressure Tank

 - Tandem construction on 1 bed left headstock + right headstock- Mirror double tailstock left and right - Double carriage - Steady rest included- Roller rest included- Opperator panel with scales needs attension and replacement - Motorized tailstock for each side left and right- 3 bed way construction- Torq on chuck 160.000 Nm- Minimum turning diameter Ø 315 mm - Field off indurstrie:- Ship yard- Propeller shaft- Hydraulic cylinder shaft- Camshaft- Defence & Aeronautica- Rolls and Shaft for steelmills- Crankshaft

This DAEWOO Lynx 210B was manufactured in 2004. A robust horizontal turning machine featuring a spindle speed of up to 5000 rpm and motor power of 11 Kw. It supports a maximum turning diameter of 280 mm and a length of 305 mm. Equipped with a 12-position turret and useful accessories like a chip conveyor and tool presetting. If you are looking to get high quality turning capabilities consider the DAEWOO Lynx 210B machine we have for sale. Contact us for more information.

This 8-axis Biglia B470 YSM was manufactured in 2007. A robust turn-mill centre featuring dual spindles, each with significant power (main spindle 26 kW, sub-spindle 11 kW), and a maximum spindle speed of 3200 RPM. It includes a FANUC 18i-TB control unit, two 12-position live-tool capable turrets, and a bar feeder for enhanced productivity. If you are looking to get high-quality turning capabilities consider the Biglia B470 YSM machine we have for sale. Contact us for more information.

Horizontal turning machine manufactured in 2021. This DMG MORI CLX 550 features a maximum turning diameter of 480 mm and a turning length of 1,240 mm. It is equipped with a 12-position turret and a maximum spindle speed of 3,250 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 550 machine we have for sale. Contact us for further details regarding this machine.

Vertical turning machine manufactured in 2002. This TOS SK 16 features a maximum workpiece diameter of 1700 mm and a turning height of 1380 mm. It has a turntable clamping diameter of 1620 mm and can handle a maximum table load of 5000 kg. If you are looking to get high-quality turning capabilities, consider the TOS SK 16 machine we have for sale. Contact us for further details.

This 5-axis Bumotec s191 was manufactured in 2021. It features a CNC control with a FANUC 31i system and a 15” LCD screen. The machine offers impressive travels with an X-axis of 410 mm, Y-axis of 200 mm, and Z-axis of 400 mm. With a maximum spindle speed of 30,000 rpm and a tool changer with 30 positions, this turn-mill centre is designed for high-quality machining capabilities. Consider the opportunity to buy this Bumotec s191 turn-mill centre. Contact us for further details.

This 6-axis DMG MORI Beta 1250 TC was manufactured in 2014. It features a maximum workpiece length of 1,200 mm and a bar capacity diameter of 102 mm. The machine includes a swivel range of the B-axis of ± 110° for enhanced flexibility and a tool magazine that accommodates up to 24 tools. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI Beta 1250 TC turn-mill centre we have for sale. Contact us for further details.

This 4-axis Romi C1000 was manufactured in 2020. It features a maximum diameter over bed of 1,000 mm and a distance between centers of 3,000 mm. The machine is equipped with a Siemens 828D CNC control system and has a rapid traverse of 8 m/min. If you are looking to get high-quality turning capabilities, consider the Romi C1000 horizontal turning machine we have for sale. Contact us for further details.

This 4-axis DOOSAN H310T was manufactured in 2006. It features a maximum turning diameter of 310 mm and a turning length of 230 mm. The machine is equipped with twin spindles and twin turrets, allowing for efficient machining operations. With a spindle speed of up to 3,500 rpm and a robust construction, this CNC turning center is designed for high productivity. If you are looking to get high-quality turning capabilities, consider the DOOSAN H310T machine we have for sale. Contact us for further details.

This 3-axis MORI SEIKI NL2500MC/700 was manufactured in 2006. It features a maximum machining diameter of 366 mm and a turning length of 705 mm. The machine is equipped with a turret that has 12 positions and a spindle speed of up to 4000 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NL2500MC/700 horizontal turning machine we have for sale. Contact us for further details.

This 8-axis Miyano ABX64 YY2 was manufactured in 2014. It features a maximum work length of 125 mm and a maximum work diameter of Ø 165 mm. The machine is equipped with two turrets, each having 12 positions, and rapid traverse rates of up to 30 m/min. If you are looking to get high-quality turning capabilities, consider the Miyano ABX64 YY2 horizontal turning machine we have for sale. Contact us for further details.

This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine includes a tool turret with 12 stations and a rapid traverse of 24 m/min in the X-axis. If you are looking to get high-quality turning and milling capabilities, consider the Hurco CNC TMX 8 MYSi turn-mill centre. Contact us for further details.

CNC lathe DMG MORI ecoTurn 450 With Siemens 840 D SLIMline controller Year of Make: 2016 Max. rotatable diameter: 315 mm Wheelbase: 685 mm Travel X : 224 mm Travel Z : 600 mm Spindle bore: 91 mm Max. spindle speed: 4000 rpm With the following accessories: Slide protection with interior lighting 12-speed turret with 12 driven stations C axis , Y axis +/- 50 mm 5 pcs of VDI 40 powered tools 60 VDI 40 tool holders Hydraulic Collet Chuck HAINBUCH with Foot Switch Tool measuring device in the work area Workpiece pick-up device Tailstock with quill Signal light 4 colour Chip conveyor Rinsing gun Coolant device with reinforced pump 20 bar Operating Instructions