other metal working machines used for sale (11,464)

\"Lot of 5 U-clamps from the Suhl precision instrument factory. The measuring screws cover a measuring range of 50 to 175 mm. Article: U-touch screws / outer micrometerCircumference: Lot = 5 piecesManufacturer: Feinmesszeugfabrik Suhl (GDR)Version: analogue, industrial versionStorage: original wooden boxesMeasuring ranges: • 50–75 mm • 75–100 mm • 100–125 mm • 125–150 mm • 150–175 mm\" Auction-ID: A7-46417-136

\"Lot of 6× Mitutoyo ABSOLUTE Digital Dial Gauges ID-U1025, 12.7 mm / 0.001 mmLot of six digital length/comparators from Mitutoyo, model ID-U1025 from the ABSOLUTE series.The devices are intended for high-precision length and comparative measurements, especially for measuring stations, fixtures and quality assurance. • Measuring range: 12.7 mm • Resolution: 0.001 mm • Display: digital • Measuring system: ABSOLUTE • Functions: • Origin (reference) • ON / OFF • Spindle: approx. Ø 8 mm • Design: Linear measuring device / digital dial gauge • Origin: Made in Japan\" Auction-ID: A7-46417-245

\"Manufacturer: MitutoyoVersion: Gauge blocks in wooden boxStandard: metricCondition: used, box and blocks with signs of useNote: Set not completeMitutoyo Gauge block in wooden box.The set comes from industrial use and is in used, functional condition. • Manufacturer: Mitutoyo • Design: Gauge blocks (block set), metric • Material: steel • Storage: original wooden box\" Auction-ID: A7-46417-153

\"Digital Dial Gauge / Digital Indicator 0–25 mmLot of two digital dial gauges (Digital Indicators) from the manufacturer SCHUT.The devices are new and come in the original case. • Measurement range: 0–25 mm (0–1\") • Resolution: 0.01 mm / 0.0005\" • Accuracy: ±0.03 mm / ±0.001\" • Repeatability: 0.01 mm / 0.0005\" • Display: digital • Switching: mm/inch • Functions: ZERO, ON/OFF • Battery: 1.5 V SR44 (1 piece) • CE mark available\" Auction-ID: A7-46417-246

\"Mitutoyo Digimatic Caliper ABSOLUTE 600 mm, Type CFC-60GDigital caliper with ABSOLUTE measuring system and IP66 (coolant proof) protection. Suitable for indoor, outdoor, depth and step measurements. Device with signs of use, nameplate dirty, but legible. Display unit with HOLD, OFFSET, PRESET and ZERO functions. Battery operated. Condition according to photos. • Manufacturer: Mitutoyo Corp., Japan • Type: CFG-60C • Measuring range: 0 – 600 mm • Protection class: IP66 • System: ABSOLUTE • Display: Digital LCD • Functions: HOLD, OFFSET, PRESET, ZERO, ABS/INC • Power supply: 1x 3V battery (SR44) • Serial number: 0001040\" Auction-ID: A7-46417-321

\"Item (2x) Outer micrometer 125 - 175 mm1st outer micrometer 125–150 mmManufacturer / Type:Feinmesszeugfabrik Suhl (GDR)Size 150 mmAnalog shackle measuring screw for external measurement in the range 125–150 mm.Solid cast iron bracket with hammered finish.With locking lever and ratchet. Delivered in the original wooden box. Typical industrial version from GDR production.Used, neat condition. 2. Outer micrometer 150–175 mmManufacturer / Type:Feinmesszeugfabrik Suhl (GDR)Size 175 mmSupplied in wooden case. 1st outer micrometer 125–150 mm • Measuring range: 125–150 mm • Reading: 0.01 mm (typical design) • With ratchet • With locking lever • Wooden box2nd outer micrometer 150–175 mm • Measuring range: 150–175 mm • Reading: 0.01 mm (typical design) • With ratchet • With locking lever • Wooden box\" Auction-ID: A7-46417-283

\"Item (3x) Digital calipers1. Digital calipers 0–150 mm ABSOLUTE IP67Type: Mitutoyo 500-161-20Model CD-15DCXABSOLUTE Digimatic calipers with IP67 (Coolant Proof) rating.Industrial version for workshop and production environments. With original box. Specifications: • Measuring range: 0-150 mm • Degree of protection: IP67 • ABSOLUTE measuring system • Battery: SR44 • Made in Japan2. Digital caliper 0-150 mm ABSOLUTEType: Mitutoyo 500-626Model CD-15PPStandard ABSOLUTE Digimatic caliper.With original case. Solid workshop design. Specifications: • Measuring range: 0-150 mm • ABSOLUTE system • Battery: SR44 • Made in Japan3. Digital caliper 0-300 mm DigimaticType:Mitutoyo 551-231Model CDN-P30Large caliper with 300 mm measuring range.Digimatic version with data interface. Suitable for larger workpieces. Technical data: • Measuring range: 0–300 mm • Digimatic • Batte ...

\"Mitutoyo digital measuring head with adjustment bracketDigital Mitutoyo measuring head mounted on a solid reference or adjustment bracket. Manufacturer: MitutoyoDisplay: digitalResolution: 0.001 mm or 0.01 mm (depending on model – probably 0.001 mm)Functions: ZERO/ABS, PRESET, ±, DATAMeasuring direction REV display availableData output (Mitutoyo standard)Mounted on base body\" Auction-ID: A7-46417-293

\"6-piece set of precision measuring rails / parallel gauge holders – MASSI / KOBA – up to 1000 mm6-piece set of adjustable precision measuring rails or parallel stops.Manufacturers mainly MASSI, a long version KOBA (800–1000 mm). Included lengths: • 200 mm • 400 mm • 500 mm • other versions • 800–1000 mm (adjustable)With fine adjustment via knurled wheel.\" Auction-ID: A7-46417-308

\"Sylvac Digital Length Comparator 400 mm / 0.01 mm (Swiss Made)Digital length comparator from Sylvac for measuring length deviations in industrial use.The device is designed for comparative measurements with a preset function and is typically used in measuring stands, fixtures and in mechanical and special machine construction. • Measuring range: 399.5 mm (15.7295 inch) • Resolution: 0.01 mm • Measuring principle: Comparison measurement (preset measurement) • Display: digital • Units: mm / inch switchable • Functions: preset, zero position, on/off • Type: long-stroke comparison measuring device / displacement measuring system • Manufacturer: Sylvac • Origin: Swiss Made\" Auction-ID: A7-46417-238

\"Disc Measuring Head / Outer Micrometer with Plate AttachmentManufacturer: MitutoyoSeries / Type: GMAVersion: Analog, with Disc Measuring SurfacesSales Unit: Lot of 5Included Measuring Ranges (according to labeling & pictures): • 150–175 mm (GMA-175) • 200–225 mm (GMA-225) • 225–250 mm (GMA-250) • 250–275 mm (GMA-275) • 275–300 mm (GMA-300)Lot of 5 Mitutoyo disc transducers in different measuring ranges. The measuring instruments are each housed in original wooden boxes. Plate measuring surfaces are available, spindles and scales are easy to read. In some cases, Japanese documents are included. Condition: Used. Measuring instruments optically good to very good with normal signs of use. Wooden boxes with clear signs of wear and lettering due to their age. No current calibration. Scope of delivery (total): • 5 × Mitutoyo disc measuring head (different measuring  ...

\"high-quality lot made of border gauges (GO / NO-GO), stored in original wooden boxes. The gauges cover a diameter range of approx. 1 mm to 25 mm. The teaching materials are mainly designed in pairs (good / reject), with scale or tolerance marking (e.g. H7, Cr). In some cases, inspection stickers are available. • Tool type: Limit gauges / limit gauges (GO / NO-GO) • Diameter range: approx. 1 mm – 25 mm • Tolerances: predominantly H7 (others possible) • Design: double-sided (good / reject) • Storage: wooden boxes • Condition: used\" Auction-ID: A7-46417-181

\"Lot of 6 pieces – Gauge size 400 mm + 3 Gauge holders + AccessoriesPart of the lot: • 1 × Gauge 400 mm (in a wooden box, Made in China) • 1 × Gauge Gauge 400 mm • 1 × Gauge Gauge 300 mm • 1 × Gauge Gauge 50 mm • 2 × Accessories/Clamping Elements\" Auction-ID: A7-46417-297

\"Inner measuring screw set (2-point contact) from GDR industrial production, manufacturer Suhl. Measuring range from 60 to 900 mm is covered by several extensions. The reading is done mechanically with 0.01 mm pitch. An original test certificate from HITEC Messtechnik is available. The test was carried out in accordance with DIN 863 Part 4, and the examinee was assessed as fit for use. The test certificate is historical and serves as proof of the previous calibration:Scope of delivery • Measuring head internal measuring screw • Extensions / intermediate pieces according to measuring range • Original wooden case • Original test certificate (HITEC measurement technology)Condition • Used, age- and use-related traces of use • Scales easy to read • Mechanics functional • Manufacturer: Suhl • Design: Internal measuring screw, 2-point contact • Measuring range: 60–900 mm ...

\"Vogel Digi Plus-Line Digital dial gauge 0–100 mm / 0.01 mmDigital dial gauge from Vogel Germany from the Digi Plus-Line with a measuring range of 0–100 mm and a resolution of 0.01 mm. • Measuring range: 0–100 mm • Resolution: 0.01 mm • Display: digital LCD, 6-digit • Switching: mm/inch • Series: Digi Plus-Line • Manufacturer: Vogel Germany • Order number: VG240213\" Auction-ID: A7-46417-236

\"Plan-parallel glass test dimensions / precision glass rings (used)Scope / Composition • Total quantity: 12 pieces • Of which: • 2 complete sets with 12 mm dimensions (each in a case) • 1 set with 24 mm dimensions (content 3 pieces) • Storage in case• 1 single sizeCondition:Used. Visually good condition, no obvious breakouts or cracks recognizable. No current calibration or metrological test performed. Scope of delivery: • 12× glass test dimensions according to the above list • Cases as shown Manufacturer: Carl Zeiss JenaOrigin: GDRDesign: plane parallel ground glass test dimensionsPitch / accuracy: 0.0001 mm\" Auction-ID: A7-46417-202

\"Cylindrical measuring pins (test pins) for bore testing, fit and dimensional control. What's in the box: • 3× full sets of test pens • Original casesCondition:Used. Traces of age and wear present on cases. Measuring pins optically neat, no visible damage. Cylindrical Measuring Pins / Test Pins – Sets (used)Manufacturer: • Richard Knauthe KG, Limbach-Oberfrohna • Schmalkalden (GDR production)Standard / Marking: • TGL 13620/I • \"Test Aids\" • Accuracy according to marking: ± 0.001 mm • Graduation: 0.05 mmCircumference / CompositionTotal: 3 complete sets • Set 1: Measuring range 2.0 – 3.0 mm • Set 2: Measuring range 3.0 – 4.0 mm • Set 3: Measuring range 4.0 – 5.0 mmAll sets are complete, in original cases (wood)\" Auction-ID: A7-46417-203

Test pin set (test measurement set) according to DIN 2269 for fine tuning and checking measuring equipment or for comparative measurement. The set is 7 pieces and covers the range 23.09 to 23.15 mm. Delivered in the original wooden box.Condition:Very good optical condition. Test pins clean, without any noticeable damage. Wooden box with slight signs of wear.Scope of delivery:    •    7 test pins according to the above list    •    Original wooden box    •    Standard: DIN 2269    •    Design: Test pins / gauge block-like test specimens    •    Quantity: 7 pieces    •     Nominal dimensions:23.09 / 23.10 / 23.11 / 23.12 / 23.13 / 23.14 / 23. ...

\"Mixed lot of measuring screws and measuring equipment – 5-part – mechanical – special designs – used5-part bundle of mechanical measuring equipment, consisting of shackle measuring screws and special/special measuring screws (including with a large round scale). • Type: mechanical measuring screws / special measuring screws • Reading: usually 0.01 mm • Measuring ranges: mixed (e.g. 5–30 mm, see pictures for other ranges) • Design: \"Metric\" Auction-ID: A7-46417-221

Item (2x) Digital micrometer 25 - 75 mm1. Mitutoyo 25–50 mmReading: 0.001 mmVersion: DigitalWith adjustment dimension & caseMeasuring range: 25–50 mmResolution: 0.001 mmWith ratchetWith original caseWith setting standard2. Mitutoyo 50–75 mmReading: 0.001 mmVersion: DigitalWith adjustment dimension & caseMeasuring range: 50–75 mmResolution: 0.001 mmWith ratchetWith original casewith adjustment standard Auction-ID: A7-46417-284

\"Granite measuring plate with measuring stand and digital Mitutoyo dial gaugeMeasuring combination consisting of granite measuring plate, measuring stand and digital dial gauge with guide. Measuring plate: • Material: hard stone (granite) • Dimensions: 400 x 250 x 50 mm • Design: ground measuring surfaceMeasuring stand: • Manufacturer: Hommelwerke • Type: MS-301 • Design: Column tripod with cross arm and clamp adjustmentDial gauge: • Manufacturer: Mitutoyo • Type: ID-C105-B • Item no.: 543-46B • Digital display (mm) • With guide / holder holder holder • Made in Japan\" Auction-ID: A7-46417-320

\"5-piece batch caliper, consisting of a Mitutoyo digital caliper, as well as several analog calipers and depth calipers. 1. Mitutoyo Digital Caliper • Type: CDN-20CX • Measuring Range: 0-200 mm • Resolution: 0.01 mm • Made in Japan 2. Digital Caliper (black/yellow, • Measuring range approx. 0-150 mm 3. Analog Caliper • Measuring range approx. 0-300 mm 4. Analog Depth Caliper (T-Shape) • Measuring Range approx. 0-150 mm 5. Analog Caliper (Classic Design) • Measuring Range Approx. 0-150 mm Item: Calipers / Depth calipers – mixed lotScope: Lot = 5 piecesManufacturer: Mitutoyo (digital), various/unknown (analogue)Design: analog & digital mixedMeasuring lengths: up to 300 mmResolution digital: 0.01 mm (Mitutoyo)Material: Stainless steelAccessories: Protective covers / bags (partial)\" Auction-ID: A7-46417-137

Manufacturer: TESA SA, SwitzerlandType: Quick-Control 1Name: TESA Quick-Control Measuring Table / Recording TableDescription:Only the measuring table from the TESA Quick-Control System is offered.It is a round precision measuring table with drilling pattern and mechanical adjustment unit for picking up and positioning workpieces for internal and external measurements. The measuring table is intended for use in dimensional and comparative measurement and is usually operated in conjunction with separate evaluation units and transducers.Scope of delivery:– TESA Quick-Control 1 measuring table– Accessories and adapter parts as shown– Original TESA transport case– Documentation in paper form – Scope of delivery only as shownCondition:Used. Traces of use present. Optical condition overall decent. – Measuring range: 0 – 170 mm– Measuring type: internal and external measurement� ...

\"Eyltool Steel Parallel Dimension Set 87 pieces, DIN 861 Grade 2Steel Limit Measure (Parallel Limit Dimensions) according to DIN 861, Quality Class 2. Version for length testing and adjusting measuring equipment. Set is complete. Used, good condition. • Manufacturer: Eyltool • Item no.: 3582287 • Standard: DIN 861 • Grade: 2 • Number of final dimensions: 87 pieces • Material: Steel • Reference temperature: 20 °C • Marking: Gage Blocks, Grade 2 • Measuring range (typical set): 1.005 mm – 100 mm (graded according to the composition in the set) • Storage: Wooden box with hinged lid\" Auction-ID: A7-46417-325

\"Item: Digital caliperManufacturer: HOLEXItem no.: 41 5611 300Measuring range: 0–300 mmVersion: DigitalSales: Hoffmann Group / HOLEX • Digital caliper 0–300 mm • mm / inch switching • Zero function • Stainless steel • Locking screw • Original plastic case • Documents availableCondition:Mint condition.Very good optical condition, no recognizable damage. In the original plastic case, with insert/instructions and silica gel. Measuring surfaces clean, display works. • Measuring range: 0–300 mm • Resolution: 0.01 mm • Display: digital • Material: stainless steel • Power supply: \"Button cell\" Auction-ID: A7-46417-148

Brand: NaberthermType: N 41/HControl: P300Electrically heated chamber furnace from Nabertherm with base. The furnace is suitable for heat treatment processes such as hardening, annealing or sintering. It is operated via the integrated P300 controller. Sale including documented accessories according to the scope of delivery. Condition:• Used• Normal signs of wear due to age and use• Refractory lining with visible signs of use• Control and display availableScope of delivery:• Chamber furnace Nabertherm N 41/H• Underframe• Control P300• Documentation (operating documents)• Accessories as shown• Delivery as shown• Manufacturer: Nabertherm• Model: N 41/H• Year of construction: 2010• Max. temperature: 1280 °C• Connection: 400 V / 3-phase / N / PE• Frequency: 50/60 Hz• Connected load: 15.0 kW• Control: P300• Degree of protection: IP according to nameplate ...

\"Complete metric gauge block set with 87 gauge blocks, consisting of: • F grading 1.001 – 1.009 mm • Further gradings 1.01 – 1.49 mm • Additional dimensions 0.5 / 1 / 1.5 / 2 / 2.5 / 5 mm • Longer gauge blocks 10 / 20 / 30 / 40 / 50 / 60 / 70 / 80 / 90 / 100 mmCondition: • Used, very neat condition • Measuring surfaces clean, without rust or chipping • Usual, slight signs of wear (fine surface lines) Article: Parallel gauge set / Gaugeset Design: metricAccuracy class: Grade 1Number of gauge blocks: 87 piecesReference temperature: 20 °CMaterial: hardened steelStorage: high-quality wooden box\" Auction-ID: A7-46417-154

\"Manufacturer: HAENNI (Switzerland)Device type: Mechanical thermo-hygrograph / recording devicewith weekly writing mechanism • Combined temperature and humidity recorder • Two writing arms • Chart roll for weekly recording • Scale right: °C and % RH • Key + spare writing refills available • Wall housing with lock\" Auction-ID: A7-46417-309

\"Lot of measuring balls G10 / H13 – different diameters – for envelope measurementFor sale is a lot consisting of several precision measuring balls (individual packaging) for envelope measurement. The balls are labeled with diameter and tolerance information, some with grade G10 and H13 reference. • Design: precision measuring balls • Grade: G10 in some cases • Tolerance specifications: ±0 or deviations (e.g. -1 / -3 / -6 μm) • Diameters include: • 10.0 mm • 10.319 mm • 13.494 mm • 17.462 mm • 19.288 mm • 19.305 mm • 72.7 mm • Other individual dimensions according to labeling • Partly with lot marking • Packaging: individually in bags\" Auction-ID: A7-46417-314

\"Manufacturer: Novotec / Intech EDMType / Name: Copper Threaded Electrodes for Die-sinking EDM M2.5 – M16 (various sizes) – Lotof copper threaded electrodes for die-sinking EDM machines (EDM) of various sizes.The electrodes come mainly from Novotec and Intech EDM and are intended for the EDM of threads (Thread EDM). The inventory includes several sizes from M2.5 to M16, some with flush bore and orbital design. The electrodes are mostly in original packaging or protective tubes and are unused or in stock. The electrodes are sorted by size and are located in storage boxes (M2.5 / M4 / M6 / M8 / M10 / M12 / M16).Copperthreaded electrodes consisting of different sizes: • M2.5 (with flush hole) • M4 x 0.70 orbital • M6 • M8 • M10 orbital • M12 • M16Partly in original packaging (Novotec) or protective tubes.Material: CopperApplication: Threaded EDM / die-sinking EDM (EDM)Typ ...