other metal working machines used for sale (11,464)

KEYENCE WM-3000 (Wide Area Coordinate Measuring Machine) mobile coordinate measuring machine. The system was delivered in November 2020 and is in well-maintained, functional condition. It is a complete measuring system including accessories, software and transport cases. Scope of Delivery • WM-3000 transducer • WM-P3000 Probe • WM-C3000 Control/Camera Module • WM-S1 camera tripod • 3x WM-B1 batteries • WM-BC1 charger • OP-99032 Power Cord • Laptop with WM measurement software installed • Transport case • Calibration certificate (09/2020) • Inspection Result Condition • Functional • Visually well-groomed • Calibration from 09/2020 (new factory calibration recommended) • Sale from ongoing operations The WM-3000 is an optically guided 3D coordinate measuring system for the large-volume measurement of components in the range of 300 mm to 3,000 mm. Measuremen ...

\"Mitutoyo V-Gauge Set (2-piece) – 1–15 mm & 10–25 mm – 0.01 mm – in a casetwo-piece set Mitutoyo V-Gauge (also tooth width gauge screws). The measuring screws are designed for measurements on gears, grooves, profiles and inclined surfaces. Two measuring ranges are included: • V-gauge 1–15 mm, reading 0.01 mm (type marking: VM3-15, item no. 114-101) • V-measuring screw 10–25 mm, reading 0.01 mm (type marking: VM3-25, item no. 114-102) • Manufacturer: Mitutoyo • Measuring ranges: 1–15 mm and 10–25 mm • Reading: 0.01 mm • Design: mechanical, metric • Measuring surfaces: V-measuring surfaces (tooth width measurement)\" Auction-ID: A7-46417-217

\"U-screw gauge set / outer micrometer UltraPrecision Messzeuge GmbH – 75–150 mm – 0.01 mm (incomplete, 3 pieces) – in a wooden boxOuter micrometer/U-micrometer set in the original wooden box from UltraPrecision Messzeuge GmbH.The set is not complete: There are only 3 micrometers available (measuring ranges 75–100 / 100–125 / 125–150 mm).Accessories/adjustment dimensions are partly available. • Manufacturer: UltraPrecision Messzeuge GmbH • Device type: U-screw gauge / outer micrometer (set, incomplete) • Number of micrometers: 3 pieces • Measuring ranges: • 75–100 mm • 100–125 mm • 125–150 mm • Reading / resolution: 0.01 mm • Storage: wooden box • Scope of delivery: 3 micrometers + available accessories in the box \" Auction-ID: A7-46417-349

\"Renishaw ball stylus for use on coordinate measuring machines (CMMs). • Manufacturer: Renishaw • Manufacturer no.: A-5000-7721 • Type: Ball button / stylus • Ball material: Plastic / rubber (black) • Shaft material: Metal • Thread: Renishaw standard (external thread, exact size not specified) • Application: Coordinate measuring machines (CMM) • Compatibility: Renishaw pushbutton systems\" Auction-ID: A7-46417-264

\"Digital U-Clamp Gauge 125–150 mm with Adjustment DimensionManufacturer / Type:MitutoyoCode No. 293-251Model MDC-150MJDescription:Mitutoyo digital micrometer in the measuring range 125-150 mm. Version with ABSOLUTE measuring system and digital display unit. Delivered in the original Mitutoyo wooden case including adjustment dimensions and documents as shown. Solid, torsion-resistant temple with heat-insulating handle. Preset and Zero/ABS function available. Visually good used condition with usual traces of storage on the wooden box. Measuring surfaces and spindle optically maintained. • Measuring range: 125 – 150 mm • Resolution: 0.001 mm • Measuring system: Digital ABSOLUTE • Display: LCD • Functions: Preset / Zero • Manufacturer: Mitutoyo • Origin: Made in Japan • Code no.: 293-251\" Auction-ID: A7-46417-277

\"Precise final dimension of 100 mm made of steel with integrated magnet for secure fixation on metallic surfaces. Suitable as a reference dimension for testing, setting and comparison measurements in the workshop, measuring room and quality assurance. The final dimension is in a storage box and shows signs of wear due to age or use, which do not impair its function. • Type: Gauge block / Length-Normal • Nominal dimension: 100 mm • Material: steel • Design: magnetic • Magnet: integrated (2 magnetic surfaces visible) • Marking: \"100\" folded in • Storage: \"Plastic box\" Auction-ID: A7-46417-265

\"Test pin post 1–5 mm (4 individual sets)Richard Knauthe KG / KS SchmalkaldenTGL 13620/ICylindrical measuring pinsstep 0.05 mmTest pin post consisting of four individual sets in the range of 1.00 mm to 5.00 mm.Included are: • 1.00 – 2.00 mm • 2.00 – 3.00 mm • 3.00 – 4.00 mm • 4.00 – 5.00 mmThe first three sets are from Richard Knauthe KG, Limbach-Oberfrohna (TGL 13620/I).The 4-5 mm set is from KS Schmalkalden. Each set contains 21 pins in 0.05 mm increments.Supplied in wooden boxes or metal boxes (4–5 mm). Total measuring range: 1.00 – 5.00 mmGraduation: 0.05 mmTotal number of pins: 84 piecesStandard: TGL 13620/I (3 sets)Manufacturer: Richard Knauthe KG / KS Schmalkalden\" Auction-ID: A7-46417-290

\"U-screw gauge set (external measurement) – 4-piece set – with wooden cases – used4-piece set of mechanical U-clamps for external measurements, mainly in original wooden cases. The measuring screws come from industrial stock, apparently classic German/GDR production (including precision measuring tool factory), some with package inserts and adjustment dimensions. • Type: Screw gauge (outside) • Reading: 0.01 mm • Measuring range: 100 mm (according to case marking) • Design: metric • Cases: wood, partly with accessories / adjustment size\" Auction-ID: A7-46417-222

\"Calibration gauge for tip calipers 0–500 mmCalibration gauge for tip calipers in a wooden case.The gauge is used to check and adjust tip calipers over defined test distances. Several reference dimensions are engraved on the bar. The design is made as a solid, ground steel strip with threaded holes on the sides for mounting or fixing. Engraved reference dimensions (visible):10 mm / 10.00 mm / 20.30 mm / 60.0 mm / 80.50 mm / 120.41 mm / 160.72 mm / 380.15 mmTotal length according to the tape measure approx. 500 mm. Type: Calibration gauge for tip calipersMeasuring range: up to approx. 500 mmMaterial: steel, ground Referencepoints: several engraved test distancesDesign: with threaded holes\" Auction-ID: A7-46417-334

Lot of two used gauge blocks for length testing and adjustment of measuring equipment.Included are:    •    1× Carl Zeiss Jena gauge block, TGL RGW 720/0, in plastic case    •    1× Gauge block from unknown manufacturers, in a wooden boxBoth sets are not complete, individual gauge blocks are missing.Condition:    •    u sed    •    signs of wear due to age and use Auction-ID: A7-46417-115

\"Mitutoyo U-gauge 75–100 mm – 0.01 mm – type OM-100 – in the caseU-screw gauge from the manufacturer Mitutoyo, type OM-100. The measuring device covers the measuring range 75-100 mm and has a reading of 0.01 mm. • Manufacturer: Mitutoyo • Type: OM-100 • Measuring range: 75–100 mm • Reading: 0.01 mm • Version: mechanical, metric • Ratchet: available Auction-ID: A7-46417-215

Standard: DIN EN ISO 3650Tolerance class: Class 1ID: 5392Condition • Used • Measuring surfaces visually good, with slight, normal traces of use • Wooden case with signs of wear and tear • Nominal dimension: 300 mm • Design: long-end dimension with through-holes • Material: steel • Tolerance class: 1 (precision measuring equipment)\" Auction-ID: A7-46417-206

\"Steel Parallel Gauge Set Grade 2, Made in USSRincompleteSet of steel gauge blocks (parallel gauge blocks) in a wooden box. Manufacturer not clearly recognizable, manufactured in the USSR. The sentence is incomplete. According to the enclosed note, several gauge blocks are missing (including 1.10 mm; 1.20 mm; 1.40 mm; 1.50 mm; 1.60 mm; 1.70 mm; 1.80 mm; 2.00 mm; 3.00 mm; 4.00 mm; 5.50 mm; 6.00 mm; 7.00 mm; 10.00 mm; 90.0 mm – without guarantee, according to the note in the lid). Existing final dimensions show signs of wear due to age and use. Wooden box with clear traces of storage and use. • Design: Steel parallel gauge blocks • Original quantity: 87 pieces • Grade: 2 • Unit of measurement: mm • Reference temperature: 20 °C • Origin: Made in USSR • Box: \"Wood\" Auction-ID: A7-46417-328

\"Description:Dial Gauges / Digital Dial Gauges – Lots ofGoods Manufacturer:Mainly Mitutoyo (Japan)Quantity:8pieces Analog dial gauges (mostly): • Pitch 0.01 mm • Classic round scale design • With driver / split-seconds hand • Different sizes • Some with protective bars • Manufacturer's marking Mitutoyo (including No. 2046S / comparable types)Digital dial gauges: • Mitutoyo ABSOLUTE / DIGIMATIC • Models include ID-C1025B (code 543-454B, 25.4 mm / 0.01 mm) • Other Mitutoyo digital dial gauges (different generations) • mm/inch, Zero/ABS, preset functions\" Auction-ID: A7-46417-250

\"Large batch of measuring and testing equipment – angles, thread gauges, hair angles, scribing tools, accessoriesLots of various measuring and testing equipment from workshop stock. Included are hair angles (partly TGL, Made in GDR), precision angles, several small stop angles, thread gauges (including Whitworth 55°), feeler gauges, scribing tools, a Mitutoyo dial device (5 mN), various cutting and blade tools as well as numerous protective cases. • Hair angle with marking TGL 6163/1 – Made in GDR • Several precision angles in different sizes • Thread gauges \"Whitworth 55°\" – Made in Germany • Feeler gauge set (0.05 mm visible, among others) • Mitutoyo measuring device, type 546-113, 5 mN • Various small L-brackets (different dimensions marked) • Marking blades / cutting tools in wooden case • Some with protective cases\" Auction-ID: A7-46417-316

Digital Indoor/Outdoor Clamp Clamp Kroeplin B440Measuring Range 0–40 mm, Resolution 0.02 mmDigital Clamp Clamp from Kroeplin Length Measurement Technology, Type B440, suitable for internal, external and step measurements. The measuring device is delivered in the original box including documents.Condition:Very good optical condition, hardly any signs of wear. Measuring legs and mechanics without noticeable damage.    •    Manufacturer : Kroeplin Längenmettechnik    •    Ty pe: B440    •    Measuring range: 0–40 mm    •    Resolution: 0.02 mm    •    Display: digital    •    CE marking available    •  &nbs ...

\"Jenoptik HOMMEL TESTER W55 roughness measuring station with Waveline WLI-20, 2x HS 300 height measuring stand, hard rock plate and accessory packageStationary roughness measuring station from Hommel-Etamic / Jenoptik from first delivery 2013 (see delivery note).The measuring station consists of a solid hard rock plate with groove (item no. 257056V01) as a low-vibration base and two HS 300 height measuring stands. One HS 300 is mounted on the granite slab, the second HS 300 stands separately behind it and is included in the scope of delivery.Components according to type plates and delivery note: • HOMMEL TESTER W55Item No. 10010488S/N 87302Year of construction 201112 VDC / 3.5 A • Waveline WLI-20 in caseItem No. 244280Year of construction 2013 • Height measuring stand HS 300Item no. 10047611 • Swivel mount for HS 300Item no. 10051140 • Column for height stand HS 300Item no. 10 ...

\"Lot of probe inserts / touch probe accessories – 11 pieces (partly FARO, 2 defective)Item consisting of eleven touch probe components or probe inserts, mainly from the field of coordinate measuring technology / measuring technology.Some of the components are in their original packaging, some with manufacturer marking FARO and itp. The lot is sold as a bundle. According to the information, two parts are defective (e.g. damaged tip / function limited). No individual testing or calibration was performed. • Quantity: 11 pieces • Type: Stylus inserts / touch probe accessories • Manufacturer (partially): FARO, itp • Design: various designs (taper, pin, ball) • Condition: • approx. 9 pieces functional (untested) • 2 pieces defective • Calibration status: unknown • Packaging: partly original packaging\" Auction-ID: A7-46417-262

Delivery as pictured Auction-ID: A7-46417-131

\"Feinmesszeugfabrik Suhl Internal measuring instrument / precision measuring tool – dial gauge 0.01 mm – set in a wooden boxInternal measuring instrument / precision measuring instrument of the Feinmesszeugfabrik Suhl (GDR) for precise internal and comparative measurement. The set is located in the original wooden box and includes an analogue dial gauge as well as several measuring pins / extensions for different measuring ranges. • Manufacturer: Feinmesszeugfabrik Suhl (GDR) • Type of measurement: Internal measurement / comparative measurement • Display: Analogue • Pitch: 0.01 mm • Fine adjustment available • Dial gauge with adjustable marking hands • Several measuring pins / extensions\" Auction-ID: A7-46417-259

Auction-ID: A1-46315-87

Technical data Manufacturer: Dr. Schneider Model: WM 1 Machine Type: Measuring Microscope Magnification: 1x / 3x / 5x / 10x / 20x Measuring range X/Y: 200 / 100 mm Table size: 400 x 240 mm Max. workpiece diameter: 200 mm Max. table load: 20 kg Dimensions: 450 x 800 x 1000 mm Weight: approx. 160 kg Voltage: 230 V Power: 0.5 kW Configuration Telecentric optics Cross table Digital evaluation unit (Quadra-Chek / Heidenhain) PC with monitor Measurement Software Documentation available Note Technical data was taken from existing documentation. Machine is used for optical measurement and quality control of workpieces. Auction-ID: A1-46315-50

Content consisting of: hair angle, machine level, compass, radius gauge, refractometer, Auction-ID: A1-46315-62

Auction-ID: A1-46315-25

Includes CAM program/license Auction-ID: A1-46315-30

Including various attachments, test block and dial gauge on tripod Auction-ID: A1-46315-63

Auction-ID: A1-46315-66

7x calipers + 1x protractor Auction-ID: A1-46315-68

Auction-ID: A1-46315-78

Auction-ID: A1-46315-9