We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
Manufacturer
- (4)
- Assembly Presses (1)
- Balling Presses (1)
- Bending And Straightening Presses (7)
- Bending Presses (125)
- Blanking Presses (1)
- Bolt Presses (1)
- CNC Bending Presses (47)
- Crank Presses (19)
- Deburring Presses (8)
- Die Forging Hammer (2)
- Die Spotting Presses (18)
- Double Column Eccentric Presses (4)
- Double Column Presses (13)
- Double Column Pulling Presses (4)
- Eccentric Presses (117)
- Edge-Merging Presses (7)
- Fine Presses (18)
- Fly Presses (3)
- Fly Presses With Electro Mechanical Drive (7)
- Four Point Crank Presses (1)
- Friction Spindle Presses (2)
- H-Frame Drawing Presses (1)
- H-Frame Punching And Forming Machines (1)
- H-Frame Toggle Lever Presses (1)
- High Speed Presses (21)
- Horizontal Forging Machines (6)
- Horizontal Presses (9)
- Hydraulic Column Presses (4)
- Hydraulic Die-Spotting And Try-Out Presses (4)
- Hydraulic Double Column Presses (17)
- Hydraulic Fine Blanking Presses (8)
- Hydraulic Flanging Presses (1)
- Hydraulic Forging Presses (4)
- Hydraulic H-Frame Drawing Presses (11)
- Hydraulic H-Frame Presses (4)
- Hydraulic Open Gap Bench Presses (2)
- Hydraulic Open Gap Drawing Presses (4)
- Hydraulic Open Gap Presses (41)
- Hydraulic Presses (143)
- Hydraulic Stretch Forming Presses (1)
- Knuckle Joint Presses ( 1 - 3 Columns) (13)
- Low-Pulling Presses (2)
- Mandrel Presses (1)
- Manual Spindle Presses (11)
- Manually Operated Presses (4)
- Mechanical Presses (38)
- Multiple-Die Wide Frame Drawing Presses (Car Body Presses) (1)
- Open Gap Eccentric Presses (103)
- Open Gap Toggle Lever Presses (10)
- Other Eccentric Presses (2)
- Other Hydraulic Presses (5)
- Other Mechanical Presses (8)
- Pneumatic Bench-Type Presses (6)
- Pneumatic Presses (14)
- Press Brakes (8)
- Presses For Special Applica (2)
- Profile Cold Rolling Mills (2)
- Punching Machines (25)
- Punching Presses (17)
- Shaft Straightening Presses (1)
- Single Column Presses (24)
- Skiving Machines (1)
- Straight-Bending Presses (27)
- Toggle Lever Presses (5)
- Transfer Presses (2 - 4 Columns) (5)
- Workshop Presses (85)
- more
- A+B FASTECH (1)
- A. U. SÖHNE (1)
- AB (1)
- ACHTERMANN + CO. (1)
- ACME (2)
- ADIRA (1)
- AGEO (5)
- AIDA (6)
- ALFRED RAITH (1)
- ALIKO (1)
- ALPMAC (2)
- AMADA (10)
- ANGER (1)
- Arisa (3)
- ARKU (1)
- ARNO (1)
- ARNOLD (2)
- ASAHI SUNAC (1)
- ATLA COOP (1)
- ATLANTIC (6)
- ATLANTIK (1)
- ATOM (1)
- ATSUGI (1)
- BARNAU (1)
- BARNAUL (4)
- BARNAULD (1)
- BAYKAL (2)
- BBT (1)
- BELTECH (1)
- BELTECH GMBH (1)
- BENELLI (1)
- Berg + Schmid (3)
- Bernardo (6)
- Berrenberg (4)
- BEUTLER (4)
- Beyeler (2)
- BEYELER MAMMUT (1)
- BILLAUD (1)
- BLEMA ZEULENRODA (1)
- BLEMAS-PPO (1)
- BLM GROUP (1)
- Borries (2)
- Bosch (2)
- BOSCHERT (1)
- BRAUN (1)
- BREDA - DANIELI (1)
- BRUDERER (19)
- BRÜCK (1)
- BUCHER-GUYER (1)
- BURKHARDT (1)
- BYSTRONIC (2)
- BYSTRONIC + KUKA (1)
- BYSTRONIC BEYELER (1)
- BöLLHOFF (1)
- CALLAHAN (1)
- CAMP (1)
- Chambersburg (3)
- CLECIM (1)
- CoastOne (4)
- COLLY (2)
- Colombo (2)
- CRIMPONE (1)
- Darley (5)
- DEGUMA (1)
- DELTECO (1)
- DERATECH (2)
- DIEBELS (1)
- DIEFFENBACHER (6)
- Dirinler (8)
- DNIPROPRESS (1)
- DONEWELL (1)
- DORST (19)
- Dr. Fritsch (2)
- DUNKES (18)
- Durendus (28)
- Durma (4)
- DURMA/KNUTH (1)
- DURMAZLAR (1)
- EBU (20)
- EDELHOFF (4)
- EHT (13)
- EIGENBAU (1)
- Eitel (2)
- ELUMATEC (1)
- EM HART, TUCKER (1)
- EPG CHINA (1)
- ERFURT (14)
- ERFURT PRESSEN (1)
- ERMAK (7)
- ESNA (1)
- ETP (1)
- EUROMAC (1)
- EXNER (5)
- FACCIN (1)
- FALKEN (5)
- FALKEN // FASTECH (1)
- FALKEN // LFSS (3)
- FARREL (1)
- Fasti (3)
- FEINTOOL (17)
- ... more
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Manufacturer:
(Category: 106)
AB 1
ACME 2
ADIRA 1
AGEO 5
AIDA 6
ALIKO 1
ALPMAC 2
AMADA 10
ANGER 1
Arisa 3
ARKU 1
ARNO 1
ARNOLD 2
ATLANTIC 6
ATLANTIK 1
ATOM 1
ATSUGI 1
BARNAU 1
BARNAUL 4
BARNAULD 1
BAYKAL 2
BBT 1
BELTECH 1
BENELLI 1
Bernardo 6
BEUTLER 4
Beyeler 2
BILLAUD 1
Borries 2
Bosch 2
BOSCHERT 1
BRAUN 1
BRUDERER 19
BRÜCK 1
BöLLHOFF 1
CALLAHAN 1
CAMP 1
CLECIM 1
CoastOne 4
COLLY 2
Colombo 2
CRIMPONE 1
Darley 5
DEGUMA 1
DELTECO 1
DERATECH 2
DIEBELS 1
Dirinler 8
DONEWELL 1
DORST 19
DUNKES 18
Durendus 28
Durma 4
EBU 20
EDELHOFF 4
EHT 13
EIGENBAU 1
Eitel 2
ELUMATEC 1
ERFURT 14
ERMAK 7
ESNA 1
ETP 1
EUROMAC 1
EXNER 5
FACCIN 1
FALKEN 5
FARREL 1
Fasti 3
FEINTOOL 17
FISCHER 1
FMS 3
FOLMER 1
G + K 1
G+K 1
GADE 1
GECHTER 2
GEORG 2
GEPPERT 2
GFU 1
GIZELIS 1
GPA 1
GPRESS 12
GRÄBENER 14
GWF 2
GöTZ 1
HACO 6
HARE 1
HBM 1
HEBO 1
HECKERT 1
HEILBRONN 10
HEKUS 1
HEUSER 2
HIDROLIKSAN 28
HILALSAN 2
HILU 1
HORNUNG 1
HURSAN 1
HUVEMA 3
Hydrap 5
HYMAG 1
HYUNDAE 1
Hämmerle 5
IMAL 1
IMS 3
INANLAR 1
INTEMACH 1
IWK 4
JAM 1
JANTSCH 1
JENNY 2
JKM 1
JMT 1
JÖRG 1
KAISER 14
KALISZ 1
KNUTH 1
Komatsu 2
KRUPP 3
KUHLMANN 1
LA G 1
LASCO 3
LAUFFER 6
LBM 1
LCM 2
LINDE 1
LOEWY 1
LOIRE 1
LOTZE 1
LUTHER 1
LVD 18
LVD CO. 1
MA.TE 7
Mabu 2
MAE 5
MAN 1
Masch 2
MASSI 1
MAYPRES 1
Mecamaq 2
MEGOBAL 1
Mengele 6
MHF 1
Minster 2
MIOS 1
MIOTAL 3
MOSSINI 1
MUBEA 4
MÜLLER 38
N.B. 2
NB 4
NBEKANNT 1
NEFF 4
NEHER 1
NKMZ 4
OMC 1
OPTIBELT 1
OTINUS 1
OZKOC 1
PEISELER 1
approved
dealer
dealer
pressure: 125 tstroke: 10-80 mmno. of strokes: 240 Hub/minram - range of adjustment: 80 mmtable surface area: 850x600 mmram surface: 760x550 mmhole in the table: 850x130 verstellbar mmtable height: 1100 mmtool hole in ram: Ø 50 mmtotal power requirement: kWweight of the machine ca.: 13 tdimensions of the machine ca.: BxTxH: 3000x2000x3300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 63 tthroat: 320 mmstroke: 8-100 mmno. of strokes: 120 Hub/minram - range of adjustment: 63 mmtable surface area: 860x620 mmram surface: 540x360 mmhole in the table: Ø 270 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 5,5 tdimensions of the machine ca.: BxTxH 1500x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 150 tpassage width: 1100 mmstroke: 500 mmtable surface area: 1100x1070 mmram surface: 1100x1070 mmhole in the table: 475x450 mmtable height: 920 mmdayligth: 800 mmweight of the machine ca.: 8 tdimensions of the machine ca.: BxTxH 2000x2000x3600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 150 tthroat: 350 mmstroke: 20-120 mmno. of strokes: 50 / 75 Hub/minram - range of adjustment: 85 mmtable surface area: 1150x670 mmram surface: 800x380 mmhole in the table: 330x200 mmtable height: 800 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 8 tdimensions of the machine ca.: BxTxH 2000x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 100 tthroat: 340 mmstroke: 8-140 mmno. of strokes: 50 Hub/minram - range of adjustment: 110 mmtable surface area: 1000x700 mmram surface: 650x450 mmhole in the table: Ø 180 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 10,5 tdimensions of the machine ca.: BxTxH 2300x1600x3500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 20 tthroat: 155 mmstroke: 6-60 mmno. of strokes: 84-210 Hub/minram - range of adjustment: 50 mm: 300 mmtable surface area: 300x450 mmtable height: 840 mmhole in the table: Ø 90 mmram surface: 190x278 mmtool hole in ram: Ø 25 mmtotal power requirement: 1,5 kWweight of the machine ca.: 1,0 tdimensions of the machine ca.: BxTxH 1100x1100x1900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 110 tthroat: 295 mmstroke: 20-120 mmno. of strokes: 60/90 Hub/minram - range of adjustment: 85 mmtable surface area: 920x580 mmram surface: 540x280 mmhole in the table: 300x180 mmtable height: 830 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 5,1 tdimensions of the machine ca.: BxTxH 1500x2000x2500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 80 tthroat: 280 mmstroke: 10-100 mmno. of strokes: 85 Hub/minram - range of adjustment: 60 mmtable surface area: 820x530 mmram surface: 260x210 mmhole in the table: Ø 120 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 5 tdimensions of the machine ca.: BxTxH 2000x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 300 tpassage width: 1350 mmstroke: 500 mmcolumn travel -side: 830 mmtable surface area: 1350x1380 (1870x1380) mmtable height: 1060 mmtotal power requirement: 45 kWweight of the machine ca.: 20 tdimensions of the machine ca.: BxTxH 2500x2000x3950 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 70 tthroat: 325 mmstroke: 800 mmdie cushion capacity: 35 tdrawing stroke: 280 mmejector stroke: 240 mmrapid traverse - down: 650 mm/secworking feed: 58-199 mm/secdayligth: 1050 mmtable surface area: 900x580 mmram surface: 460x460 mmtotal power requirement: 45 kWweight of the machine ca.: 6,3 tdimensions of the machine ca.: BxTxH 1000x2200x4000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 80 tstroke: 8-140 mmno. of strokes: 105 Hub/minram - range of adjustment: 100 mmtable surface area: 900x625 mmram surface: 600x280 mmhole in the table: Ø 150 mmtable height: 1000 mmtool hole in ram: Ø 40 mm: 490 mmweight of the machine ca.: 7 tdimensions of the machine ca.: BxTxH 1800x2200x2600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Hand Screw Press, BalanceSPMYB-3pressure max: 20.000 kgWidth between column: 380 mmstroke: 200 mmgreatest height: 320 mmTable bore: Ø 76 mmBalance diameter: Ø 1450 mmTable: 1120 x 1120 mmDimensions: 1450 x 1450 x 2110 mm
approved
dealer
dealer
Hydraulic Testing PressWALTER + BAI AG200 kN D-200-D / CSRG-5501pressure max: 200 kNstroke: max approx. 200 mm (at the moment limited by measuring probe and limit switch)largest height: 400 mmtable: 340 x 340 mm380 VDimensions: 1300 x 840 x 2050 mm
approved
dealer
dealer
Hand spindle pressCompressive force: presumably approx. 6000 kgTable surface: 390 x 250 mmSpindle diameter: Ø 40 mmPlunger stroke max: 25 mmDistance table-ram: 55 mmprojection: 100 mmDimensions: 440 x 390 x 510 mm
approved
dealer
dealer
pressure: 40 tthroat: 320 mmstroke: 250 mmarm length: 320 mmtable surface area: 1400x600 mmram surface: 1200x600 mmdayligth: 650 mmtotal power requirement: 22 kWweight of the machine ca.: 8 tdimensions of the machine ca.: 3200x3300x3300 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 25 tstroke: 100 mmtable surface area: 440x320 mmram surface: 360x220 mmhole in the table: 160x100 mmtable height: 900 mmtool hole in ram: Ø 40 mmdayligth: 280 mmweight of the machine ca.: 1,5 tdimensions of the machine ca.: BxTxH 1500x1500x2100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 315 tstroke: 40-200 mmno. of strokes: 20-100 Hub/minram - range of adjustment: 120 mmram surface: 2000x1100 mmtable surface area: 2000x1200 mmhole in the table: 1700x250 mm: 500 mmcolumn travel -side: 820x650 mmtotal power requirement: 45 kWweight of the machine ca.: 44 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 630 tpassage width: 1390 mmstroke: 400 mmtable surface area: 1390x1250 mmtotal power requirement: 75 kWweight of the machine ca.: 36 tdimensions of the machine ca.: BxTxH 3200x2800x4000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 20 tstroke: 8-38 mmno. of strokes: 100-1800 Hub/mintable surface area: 400x400 mmtable pass: 380x80 mmtable height: 1000 mmweight of the machine ca.: 4 tdimensions of the machine ca.: BxTxH 1600x1600x3100mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 8 tthroat: 115 mmstroke: 8-56 mmram - range of adjustment: 30 mmtable surface area: 390x230 mmram surface: 155x125 mmhole in the table: 105x75 mmtable height: 820 mmtool hole in ram: 35 mmweight of the machine ca.: 800 kgdimensions of the machine ca.: 1000x1000x1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 100 tthroat: 410 mmstroke: 8-112 mmno. of strokes doubel-strokes per min.: 55 / 82 ram - range of adjustment: 80 mmtable surface area: 950 x 700 mmram surface: 700x450 mmhole in the table: Ø 280 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 7,0 tdimensions of the machine ca.: 1400x2200x2800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 63 tthroat: 300 mmstroke: 8-140 mmno. of strokes: 70 Hub/minram - range of adjustment: 100 mmtable surface area: 750x620 mmram surface: 500x340 mmhole in the table: Ø 180 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 7,5 tdimensions of the machine ca.: BxTxH 2100x1500x3300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 100 tthroat: 325 mmstroke: 10-110 mmno. of strokes: 100 Hub/minram - range of adjustment: 80 mmtable surface area: 900x630 mmram surface: 500x315 mmhole in the table: 325x225 mmtable height: 800 mmtool hole in ram: Ø 50 mmdimensions: BxTxH mmweight of the machine ca.: 8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 63 tstroke: 10-80 mmno. of strokes: 65-400 Hub/minram - range of adjustment: 80 mmtable surface area: 1030x550 mmram surface: 920x450 mmhole in the table: 700x200 mm: 420 mmweight of the machine ca.: 10 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 100 tstroke: 10-130 mmno. of strokes: 30-90 Hub/minthroat: 330 mmram - range of adjustment: 100 mmtable surface area: 950x660 mmram surface: 540x440 mmhole in the table: Ø 230 mmtable height: 1000 mmtool hole in ram: Ø 50 mmtotal power requirement: 7,5 kWweight of the machine ca.: 7 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 125 tthroat: 400 mmstroke: 6-125 mmram - range of adjustment: 100 mmdayligth: 400 mmtable surface area: 1100x750 mmno. of strokes: 60 Hub/minram surface: 800x550 mmhole in the table: Ø 150 mmtotal power requirement: 14 kWweight of the machine ca.: 9,0 tdimensions of the machine ca.: BxTxH 1500x2200x3500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 80 tthroat: 300 mmstroke: 8-112 mmno. of strokes: 60 Hub/minram adjustment: 80 mmtable surface area: 700x550 mmram surface: 400x300 mmtable height: 870 mmhole in the table: Ø 280 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 5,0 tdimensions of the machine ca.: 1500x2000x2700 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 63 tthroat: 315 mmstroke: 8-100 mmno. of strokes: 140 Hub/minram - range of adjustment: 63 mmtable surface area: 1200x630 mmram surface: 800x315 mmhole in the table: Ø 110 mmtable height: 820 mmtool hole in ram: Ø 50 mmdayligth: 335 mmtotal power requirement: 7,5 kWweight of the machine ca.: 5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
