We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
Manufacturer
- Automatics (Lathes) For Bars (5)
- Bench Lathes For Precision Mechanics (5)
- Carousel Turning Machines (Lathes) (53)
- Centre-Drive Turning Machines (1)
- CNC Carousel Turning Machines (41)
- CNC Cycle Turning Machines (43)
- CNC Double Spindel Turning Maschines (Lathes) (19)
- CNC Long Turning Automatics (31)
- CNC Long Turning Machines (34)
- CNC Multiple Spindel Turning Lathes (12)
- CNC Sloping Beds (2)
- CNC Turning Automatics (26)
- CNC Turning Centers (244)
- CNC Turning Machines (523)
- Cutting-Off Machines (9)
- Cycle Lathes (33)
- End Working Machines (1)
- Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes) (236)
- Facing Disks (1)
- Facing Lathes (9)
- Facing Lathes With Tailstock (1)
- Feed Automatics (1)
- Heavy Lathes (33)
- High Precision Lathes (6)
- High Precision Turning Machines (Lathes) (6)
- Hollow Spindle Turning Machines (Lathes) (1)
- Horizontal Turning Centres (14)
- Horizontal Turning Machines (Lathes) (4)
- Longitudinal Turning Machines (Lathes) (6)
- Lunettes (17)
- Multi Spindle Automatics For Bars (30)
- Multi Spindle Chucking Automatics (1)
- Multi-spindle turn automatics (35)
- NC Universal Turning Machines (Lathes) (2)
- Other Turning Machines (19)
- Pointed Turning Automatics (Lathes) (3)
- Ride-Along Lunettes (1)
- Rotating Benches (14)
- Short-Bed Lathes (5)
- Single Spindle Automatics For Bars (8)
- Sloping Bed Turning Machines (Lathes) (1)
- Special Purpose Turning Machines (2)
- Spindle Turning Automatics (Lathes) For Bars (3)
- Three-Bake-Feed Automatics (1)
- Turning Automatics (17)
- Turning Automatics For Bars With Counter-Spindle (1)
- Turning Benches (2)
- Turning Machines (Lathes) (98)
- Turning Machines (Lathes) And Turning Automatics (1)
- Turning Machines (Lathes) For Bars (2)
- Turret Lathes (7)
- Universal Lathes > 800 Mm Diameter (8)
- Universal Lathes Up To 800 Mm Diameter (10)
- Universal Turning Machines (Lathes) (25)
- Vertical Turning Centres (2)
- Vertical Turning Machines (33)
- Vertical Turning Machines, Open Gap And Straight-Sided (1)
- Vertikal Turning Machines (Lathes) (49)
- Whirling And Thread Whirling Machines (1)
- more
- AB (1)
- abb (3)
- ACCUWAY (5)
- AI HEMBRUG (1)
- AJAX (1)
- ALEX TECH (2)
- ALEX TECH VIPER (1)
- AMUTIO-CAZENEUVE (1)
- ANTONIO ANSELMI (1)
- ARGUS - FLOWSERVE (1)
- AVIA (1)
- AYEL-TECH (1)
- BAUER (2)
- Benzinger (5)
- Bernardo (20)
- BERTHIEZ (4)
- BIGLIA (22)
- BISON (1)
- Blansko (2)
- BOEHRINGER (19)
- BOEHRINGER-VDF (1)
- BOLEY (5)
- BRIGDEPORT (1)
- BRINKMANN (2)
- BUFFALO CHALLENGER (1)
- BULLARD (2)
- Bulmak (2)
- BUMOTEC (1)
- BÖHRINGER (3)
- CAORLE (1)
- CARNAGHI (1)
- CARNAGHI PIETRO (1)
- CAZENEUVE (30)
- CAZENUEVE (1)
- Celoria (2)
- CERUTI (1)
- CHALLENGER (3)
- Chevalier (2)
- CHIAH CHYUN (1)
- CHIAH CHYUN MUELLER (1)
- CHIRON (1)
- CHUN ZU (1)
- CITIZEN (25)
- CKD (1)
- CKD BLANSKO (3)
- CKD-BLANSKO (2)
- CLOVIS (1)
- CMT (3)
- CMT MASCHINENBAU (1)
- CMZ (5)
- Colchester (38)
- COLCHESTER 600 (1)
- COLCHESTER HARRISON (1)
- COLOMBO (2)
- COMEC (1)
- CONTUR (1)
- CORMAK (1)
- CRAWFORD SWIFT (2)
- CS (1)
- D (1)
- DAEWOO (10)
- DAEWOO (DOOSAN) (2)
- DAINICHI (1)
- DEMOOR (2)
- DIEDESHEIM (1)
- DINN SPINNING LATHE (1)
- DIVERS (1)
- DMG (21)
- DMG GILDEMEISTER (21)
- DMG GILDEMISTER (1)
- DMG MORI (52)
- DMG MORI SEIKI (1)
- DMG MORI SEKI (1)
- DMG MORI WASINO (1)
- DMG-MORI (1)
- DMT (2)
- DMT / KERN (1)
- DMT KERN (1)
- DMTG (1)
- DN SOLUTIONS (9)
- Doerries Scharmann (2)
- DOOASN (1)
- DOOSAN (67)
- DOOSAN DAEWOO (5)
- DOOSAN PUMA (2)
- DOOSAN, MIRCRO, ETC. (1)
- DOOSAN-PUMA (1)
- DORMAC (1)
- DORRIES (1)
- DORRIES. (1)
- DREHMA (1)
- DS DORRIES SCHARMANN (1)
- DUGARD (1)
- DÖRRIES (10)
- DÖRRIES SCHARMANN (1)
- DÖRRIES-SCHARMANN (1)
- E/D/E, WUPPERTAL (1)
- EBOSA (2)
- ECHEA (1)
- ECOCA (1)
- ... more
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Manufacturer:
(Category: 102)
AB 1
abb 3
ACCUWAY 5
AJAX 1
AVIA 1
BAUER 2
Bernardo 20
BERTHIEZ 4
BIGLIA 22
BISON 1
Blansko 2
BOEHRINGER 19
BOLEY 5
BULLARD 2
Bulmak 2
BUMOTEC 1
CAORLE 1
CARNAGHI 1
CAZENEUVE 30
Celoria 2
CERUTI 1
CHIRON 1
CHUN ZU 1
CITIZEN 25
CKD 1
CLOVIS 1
CMT 3
CMZ 5
Colchester 38
COLOMBO 2
COMEC 1
CONTUR 1
CORMAK 1
CS 1
D 1
DAEWOO 10
DAINICHI 1
DEMOOR 2
DIVERS 1
DMG 21
DMG MORI 52
DMG-MORI 1
DMT 2
DMT KERN 1
DMTG 1
DOOASN 1
DOOSAN 67
DORMAC 1
DORRIES 1
DORRIES. 1
DREHMA 1
DUGARD 1
DÖRRIES 10
EBOSA 2
ECHEA 1
ECOCA 1
EGURO 1
ELMAG 8
EMAG 33
Emco 45
Ergomat 5
ESCO 1
EUBAMA 1
EXCELLO 1
FALCON 1
FAMAR 5
FANUC 2
FARREL 1
FAT 3
FEELER 2
Feinbau 3
FELSOMAT 1
FMB 1
Forkardt 2
FORMAT 1
FREMTAS 1
FRORIEP 2
GALLIC 1
GDW 3
GE 1
GEMA 2
GEMINIS 12
Gildemeister 130
Goodway 7
Graziano 3
GURUPTZE 1
GURUTZPE 9
GURUZTPE 1
GWM-TECH 2
HAAS 34
HANKOOK 4
HANWHA 8
HAPREMEC 1
HARDINGE 11
HARDINGS 1
Harrison 8
HARTFORD 1
HBM 9
HEID 1
HERKULES 2
HESSAPP 3
HITACHI 1
HNK 1
HOESCH 1
HOFFMAN 1
HUNGER 1
HURCO 9
HUVEMA 10
HWACHEON 11
Hyundai 20
HYUNDAI WIA 11
ICOCA 1
IEMCA 2
IMT 1
INDEX 75
INNSE 2
IRLE 1
JENN-WEI 1
JESSEY 6
JMTCL 1
JOHNFORD 4
KAMI 5
KEKEISEN 1
Kern 8
KERN-DMT 1
KIA 1
Kitagawa 2
KITAMURA 1
Klaaßen 3
KME 1
KMT 1
KNUTH 6
KOLOMNA 8
Kovosvit 4
LABOR 2
LACFER 3
LATHES 1
LEADWELL 5
LEALDE 1
LEIFELD 1
Leinen 2
LIEBER 1
LORCH 1
LÖW 2
M+M 1
MACMATIC 1
MAE 1
MAG IAS 1
MAHO 1
MAIER 2
MAMMUT 1
MANURHIN 5
MARTIN 6
MAS 11
MATEC 1
MATRA 3
Mazak 119
MCM 4
MERLI 1
METOSA 1
MEUSER 14
MEXPOL 3
MFD 2
MICROCUT 2
MIOTAL 4
MISAL 1
MIYANO 11
MNT 1
MONDIALE 10
approved
dealer
dealer
- X Travel 210- Z Travel 360- Power 22 kW- Driven live tools 7.5 kw / 3000 Rpm - In feed table- Out feed table- Package jaws- Package tool holders - Chip conveyor- Coolant system 9 Bar Grundfos
approved
dealer
dealer
- Double carriage with 4 position revolver and 840D Siemens- Steady rest 200 - 1090 mm- Roller rest 860 - 1090 mm- 4 chuck 1350 mm- Clamping from 200 - 1100 mm- Bed width 2000 mm- Stoke X Axis 950 mm- Stroke Z Axis 14900 mm
approved
dealer
dealer
- Chip conveyor- SMW 315 3 chuck- 2 x Radial live tooling holders- 2 x Axial live tooling holders- Spindle bore 80 mm- BMT-Tooling system- Tool measuring probe- Spindle hours 6960 / 6270 Running hours
approved
dealer
dealer
- 4 chuck 1600 mm- Heidenhain digital read out- Steady rest 710 mm- Powered tailstock- Threath cutting - Triple guide ways cast irion bed design- For turbine rotors, electrical motor anchors , reactor vessels, cylinders, rope pullys, marine propulsion shaft, castings, shafts and cement industry
approved
dealer
dealer
- Center height 1700 mm- Can be extended or shortend to matching height as they are 2 peices- Central lubrication- Each steady rest equipped with 3 point- Driven / Morotized units
approved
dealer
dealer
- Cycle controlled machine- Handwheel electronic in Z + X Axis- Parat Tool holders sytem- 3 chuck diameter.. - For manual, cycle and CNC processing up to interactive contour programming- Covered guidance tracks (DGP) for high long-term precision- Direct drive from motor to main spindle for high running smoothness- Oil recirculating lubrication unit with filtering for the lubrication of the precision main spindle bearing- Combination control unit for economically advantageous programming and machine operation, as well as optimum access to the work area
approved
dealer
dealer
- HeidenHain ND-780 with 3 axis Read-outX, Zo, Z - HeidenHain LS388C Scales- 2 x CE-Chuck cover for 500 & 900 mm- SCHUNK 3 chuck Ø 400-102 - Bison 4 chuck - Steady rest Ø 30 - 210 mm- Steady rest Ø 210 - 370 mm
approved
dealer
dealer
- Multi-Tasking Machining in a Single Machine Setup- Sub spindle for overtaking with full C-Axis- The INTEGREX IV series can finish all machining processes.- High speed, advanced milling spindle that can tilt up to 240 degrees swiveling.- Lower turret with rotary tool spindle so livew tooling- Chip conveyor with coolant and 15 Bar iKZ- Double chuck KNCS-N 210-53 SMW Autoblock- MAZAK Flex -GL150F Gantry Loader- Gripping range 200 x 120 length x 15 Kg
approved
dealer
dealer
- Please note: not original pictures its only 3000 length not 5000 mm - 3 Guide way construction- 2 Axis HeidenHain Digital readout- Feed in 3 directions all tool post slide- Central lubrication - Work load flying in chuck 2500 Kg- Work load NOT supported 8500 Kg- Work load supported 10000 Kg - Optional 4 chuck ca 1200 mm- Optional 4 chuck ca 1500 mm- Optional package with 3 steady rest fixed model from to
approved
dealer
dealer
- 3 chuck 1200 mm- Heidenhain Digital read out syhstem X / Z Axis- Feeds in 2 directions- Multi fix Tool systems with inserts
approved
dealer
dealer
- X Stroke 1835 mm- Z Stroke 1000 mm- Table load 20 Ton- Ram size 230 x 230 mm - Stroke crossrail 800 mm - Stroke crossrail in 5 steps each 200 mm- Live tools 2000 Rpm- Power live tools 15 kW- ATC 18 station max L = 450 mm- Taper BT50 BIG PLUS- Full C-Axis 360.000 - Under power in AEROSPACE precision plant- 2020 Table bearing replaced- 2020 Ram bearing replaced- 2025 new chip conveyor
approved
dealer
dealer
- Doubled support carriage- CNC controlled measuring and correction probe- Chip conveyor - internal and external clamping jaws (wheel clamp in and out)- overhauling cost 850k EUR- Under power free 02.2026
approved
dealer
dealer
- C-Axis rapid traverve 400 Min- Turret indecing time 0,2 sec for 1 station- Heavy duty cutting (depth cut 6mm) 162.7 mL/Min- LNS Bar feeder new 2017- Large package tooling driven / live tools- 8 axis controlled with 2 spindles and turrets
approved
dealer
dealer
- Chip conveyor - SMW Front and Rear chuck 700 mm - Double revolver 6+8 positions- Big Bore 360 mm- Tailstock with power quill- Tooling package included with inserts and jaws
approved
dealer
dealer
- 4 Chuck 1400 mm- Steady rest 3 units Ø 100-1050- Roller steady open 2 units Ø 1120- KNOLL Chip conveyor 2022- Boring bar Ø 260 x 3500 mm- Boring bar Ø 200 x 1500 mm- Boring bar Ø 150 x 1100 mm
approved
dealer
dealer
- Full C-Axis 360.000- Driven tools Axiaal & Radial - Driven tailstock- Steady rest C-Type- Front chuck with 180 bore- Rear chuck with 180 bore- 3 guide way bed width 750 mm
approved
dealer
dealer
Inv. Num. : 8679 Type: VL 5S Producer: Emag Created: 2007 Parameters: Control system: Siemens 840 SL Feed length X-axis: 570 mm Feed length Z-axis: 200 mm Max. turning diameter: 220 mm Maximum workpiece weight: 120 kg Maximum spindle speed: 4500 1/min Max. workpiece height: 110 mm Weight: 6500 kg Equipment: Turret with Leiftool drive Chip conveyor
approved
dealer
dealer
Inv. Num. : 8680 Type: VSC 250 DS Producer: Emag Created: 2007 Parameters: Control system: Siemens 840 SL Table diameter: 260 mm Feed length X-axis: 680 mm Feed length Z-axis: 200 mm Maximum turning length: 100 mm Max. turning diameter: 250 mm Maximum workpiece weight: 40 kg Motor power: 35 kW Length: 3800 mm Width: 2100 mm Height: 2400 mm Weight: 7500 kg Equipment: Chip conveyor
approved
dealer
dealer
Horizontal CNC lathe with double spindle and two working spaces. Muratec MW 40 Year of Make: 2017 Original price: 260.000,- € net Current leasing rate: 2,678 € LNS FOX Spray Cabine, built in 2017 SPECIFICATIONS Machine Type: Lathe Front Spindle Construction: horizontal lathe Chuck size: 135 mm (5 inches) Number of spindles: 2 pieces Turret: 2 à 10 stations Spindle speed: 10,000 rpm Drive power: 3.7 / 2.2 kW
