We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
Manufacturer
- (21)
- Automatics (Lathes) For Bars (5)
- Bench Lathes For Precision Mechanics (6)
- Carousel Turning Machines (Lathes) (52)
- Centre-Drive Turning Machines (1)
- CNC Carousel Turning Machines (41)
- CNC Cycle Turning Machines (43)
- CNC Double Spindel Turning Maschines (Lathes) (19)
- CNC Long Turning Automatics (30)
- CNC Long Turning Machines (34)
- CNC Multiple Spindel Turning Lathes (12)
- CNC Sloping Beds (2)
- CNC Turning Automatics (26)
- CNC Turning Centers (242)
- CNC Turning Machines (516)
- Cutting-Off Machines (8)
- Cycle Lathes (33)
- End Working Machines (1)
- Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes) (237)
- Facing Disks (1)
- Facing Lathes (9)
- Facing Lathes With Tailstock (1)
- Feed Automatics (1)
- Heavy Lathes (33)
- High Precision Lathes (6)
- High Precision Turning Machines (Lathes) (6)
- Hollow Spindle Turning Machines (Lathes) (1)
- Horizontal Turning Centres (14)
- Horizontal Turning Machines (Lathes) (4)
- Longitudinal Turning Machines (Lathes) (6)
- Lunettes (16)
- Multi Spindle Automatics For Bars (30)
- Multi Spindle Chucking Automatics (1)
- Multi-spindle turn automatics (35)
- NC Universal Turning Machines (Lathes) (2)
- Other Turning Machines (19)
- Pointed Turning Automatics (Lathes) (3)
- Ride-Along Lunettes (1)
- Rotating Benches (13)
- Short-Bed Lathes (5)
- Single Spindle Automatics For Bars (8)
- Sloping Bed Turning Machines (Lathes) (1)
- Special Purpose Turning Machines (2)
- Spindle Turning Automatics (Lathes) For Bars (3)
- Three-Bake-Feed Automatics (1)
- Turning Automatics (17)
- Turning Automatics For Bars With Counter-Spindle (1)
- Turning Benches (2)
- Turning Machines (Lathes) (96)
- Turning Machines (Lathes) And Turning Automatics (1)
- Turning Machines (Lathes) For Bars (2)
- Turret Lathes (7)
- Universal Lathes > 800 Mm Diameter (8)
- Universal Lathes Up To 800 Mm Diameter (10)
- Universal Turning Machines (Lathes) (25)
- Vertical Turning Centres (2)
- Vertical Turning Machines (33)
- Vertical Turning Machines, Open Gap And Straight-Sided (1)
- Vertikal Turning Machines (Lathes) (48)
- Whirling And Thread Whirling Machines (1)
- more
- abb (3)
- ACCUWAY (5)
- AI HEMBRUG (1)
- AJAX (1)
- ALEX TECH (2)
- ALEX TECH VIPER (1)
- AMUTIO-CAZENEUVE (1)
- ANTONIO ANSELMI (1)
- ARAD (1)
- ARGUS - FLOWSERVE (1)
- AVIA (1)
- AYEL-TECH (1)
- BAUER (2)
- Benzinger (9)
- BERG (1)
- Bernardo (20)
- BERTHIEZ (4)
- BIGLIA (22)
- BISON (1)
- Blansko (2)
- BOEHRINGER (19)
- BOEHRINGER-VDF (1)
- BOLEY (5)
- BRAUN ZERBST (1)
- BRIGDEPORT (1)
- BRINKMANN (2)
- BUFFALO CHALLENGER (1)
- BULLARD (2)
- BULMAG (1)
- Bulmak (2)
- BUMOTEC (1)
- BÖHRINGER (3)
- CAORLE (1)
- CARNAGHI (1)
- CARNAGHI PIETRO (1)
- CAZENEUVE (30)
- CAZENUEVE (1)
- Celoria (2)
- CERUTI (1)
- CHALLENGER (3)
- Chevalier (2)
- CHIAH CHYUN (1)
- CHIAH CHYUN MUELLER (1)
- CHIRON (1)
- CHUN ZU (1)
- CITIZEN (25)
- CKD (1)
- CKD BLANSKO (3)
- CKD-BLANSKO (2)
- CLOVIS (1)
- CMT (3)
- CMT MASCHINENBAU (1)
- CMZ (6)
- Colchester (39)
- COLCHESTER 600 (1)
- COLCHESTER HARRISON (1)
- COLOMBO (2)
- COMEC (1)
- CONTUR (1)
- CORMAK (1)
- CRAWFORD SWIFT (2)
- CS (1)
- D (1)
- DAEWOO (8)
- DAEWOO (DOOSAN) (2)
- DAINICHI (1)
- DEMOOR (2)
- DIEDESHEIM (1)
- DINN SPINNING LATHE (1)
- DIVERS (1)
- DMG (23)
- DMG GILDEMEISTER (21)
- DMG GILDEMISTER (1)
- DMG MORI (53)
- DMG MORI SEIKI (1)
- DMG MORI SEKI (1)
- DMG MORI WASINO (1)
- DMG-MORI (1)
- DMT (2)
- DMT / KERN (1)
- DMT KERN (1)
- DMTG (1)
- DN SOLUTIONS (9)
- Doerries Scharmann (2)
- DOOASN (1)
- DOOSAN (68)
- DOOSAN DAEWOO (5)
- DOOSAN PUMA (2)
- DOOSAN, MIRCRO, ETC. (1)
- DOOSAN-PUMA (1)
- DORMAC (1)
- DORRIES (1)
- DORRIES. (1)
- DREHMA (1)
- DS DORRIES SCHARMANN (1)
- DUGARD (1)
- DÖRRIES (10)
- DÖRRIES SCHARMANN (1)
- DÖRRIES-SCHARMANN (1)
- E/D/E, WUPPERTAL (1)
- ... more
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Manufacturer:
(Category: 102)
abb 3
ACCUWAY 5
AJAX 1
ARAD 1
AVIA 1
BAUER 2
BERG 1
Bernardo 20
BERTHIEZ 4
BIGLIA 22
BISON 1
Blansko 2
BOEHRINGER 19
BOLEY 5
BULLARD 2
BULMAG 1
Bulmak 2
BUMOTEC 1
CAORLE 1
CARNAGHI 1
CAZENEUVE 30
Celoria 2
CERUTI 1
CHIRON 1
CHUN ZU 1
CITIZEN 25
CKD 1
CLOVIS 1
CMT 3
CMZ 6
Colchester 39
COLOMBO 2
COMEC 1
CONTUR 1
CORMAK 1
CS 1
D 1
DAEWOO 8
DAINICHI 1
DEMOOR 2
DIVERS 1
DMG 23
DMG MORI 53
DMG-MORI 1
DMT 2
DMT KERN 1
DMTG 1
DOOASN 1
DOOSAN 68
DORMAC 1
DORRIES 1
DORRIES. 1
DREHMA 1
DUGARD 1
DÖRRIES 10
EBOSA 2
ECHEA 1
ECOCA 1
EGURO 1
ELMAG 8
EMAG 34
Emco 46
Ergomat 5
ESCO 1
EUBAMA 1
EXCELLO 1
FALCON 1
FAMAR 5
FANUC 2
FARREL 1
FAT 3
FEELER 2
Feinbau 3
FMB 1
Forkardt 2
FORMAT 1
FREMTAS 1
FRORIEP 2
GALLIC 1
GDW 5
GEMA 2
GEMINIS 12
Gildemeister 136
Goodway 7
Graziano 3
GURUPTZE 1
GURUTZPE 9
Guss 2
GWM-TECH 2
HAAS 34
HANKOOK 4
HANWHA 8
HAPREMEC 1
HARDINGE 11
HARDINGS 1
Harrison 7
HBM 9
HEID 1
HERKULES 2
HESSAPP 3
HITACHI 1
HNK 1
HOESCH 1
HOFFMAN 1
HUNGER 1
HURCO 9
HUVEMA 10
HWACHEON 11
Hyundai 20
HYUNDAI WIA 11
ICOCA 1
IEMCA 2
IMT 1
INDEX 91
INNSE 2
IRLE 1
JENN-WEI 1
JESSEY 6
JMTCL 1
JOHNFORD 4
KAMI 5
KEKEISEN 1
Kern 8
KERN-DMT 1
KIA 1
Kitagawa 2
KITAMURA 1
Klaaßen 3
Klopfer 2
KME 1
KMT 1
KNUTH 7
KOLOMNA 9
Kovosvit 4
LABOR 2
LACFER 2
LATHES 1
LEADWELL 5
LEALDE 1
LEIFELD 1
Leinen 2
LIEBER 1
LORCH 1
LÖW 2
M+M 1
MACMATIC 1
MAE 1
MAG IAS 1
MAHO 1
MAIER 2
MAMMUT 1
MANURHIN 5
MARTIN 8
MAS 11
MATEC 1
MATRA 5
Mazak 127
MCM 4
MERLI 1
METOSA 1
MEUSER 15
MEXPOL 3
MFD 2
MICROCUT 2
MIOTAL 4
MISAL 1
approved
dealer
dealer
turning diameter over slide rest: 940 mmturning length: 10000 mmturning diameter: 1250 mmspindle diameter: 105 mmspeed: 1,6 - 315 (x24) m/minvoltage: 380 Vtotal power requirement: 75 kWweight of the machine ca.: tdimensions of the machine ca.: m4-jaw faceplatePower compoundThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
tool clamping area: 200x55x195 mmweight: 0,01 t- Multifix tool holder, 5 pcs. like new, 2 pcs. less used.--- price per piece ----The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Machine Details Warehouse number 1105-03364 Machine type lead and pull spindle lathe Make CAZENEUVE Type HB 525 X 1000 Year of construction 1965 Conventional control type Storage location HAGUENAU Country of origin France Delivery time Immediate Freight base EX WAREHOUSE Technical details Turning diameter over bed 500 mm Turning diameter via support 220 mm Turning length 1000 mm Spindle speeds 25-2000 rpm various accessories YES Information IN GOOD WORKING CONDITION LOT OFF ACCESSORIS WITH MULTIFIXE TOOL HOLDER SYSTEMS
approved
dealer
dealer
turning diameter over bed: 320 mmturning diameter over slide rest: 220 mmturning length: 600 mmturning diameter in the gap: 320 mmturning speeds: 60 - 1650 U/mincentre height: 160 mmspindle bore: 38 mmtailstock quill taper MT: 3 MKconnected load frequency: 400 Vtotal power requirement: 1,1 kWweight of the machine ca.: 340 Kgdimensions of the machine ca.: 1,4 x 0,75 x 0,7 mCenter lathe with:3-jaw chuck 160 mm.4-jaw chuck 200 mm.Faceplate 200mmFixed bezelContinuous bezel4-way steel holder.Halogen machine lightChip tray, chip protection wallHardened and ground bed tracksLongitudinal and cross feedComplete coolant systemForage protectionSet of change gearsMachine toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter over bed: 250 mmturning diameter over slide rest: 130 mmturning length: 700 mmturning speeds: 115 - 1620 U/mincentre height: 125 mmspindle bore: 27 mmtailstock quill taper MT: 2 tailstock quill stroke: 40 mmmetric threading: 0,2 - 3,5 mmthread - inch: 8 - 56 inch.thread - module: 0,2 - 12,5 mmswival range +/-: Oberschlitten 45 °connected load frequency: 400 Vtotal power requirement: 0,75 kWweight of the machine ca.: 0,15 tdimensions of the machine ca.: 1,41 x 0,61 x 0,41 mEquipped with- 2-axis digital measuring system with position indicator- manufactured according to DIN 8606- 27 mm spindle passage- adjustable guideways by adjustable strips- Strong engine with 0.75 kW- High resolution of the axis spindles for exact positioningDelivery:3-jaw chuck 100 mm, change gear set, splash guard 3-axisdigital measuring system fully assembled.The data for this ad was created with M ...
approved
dealer
dealer
turning diameter over bed: 250 mmturning diameter over slide rest: 130 mmturning length: 700 mmturning speeds: 115 - 1620 U/mincentre height: 125 mmspindle bore: 27 mmtailstock quill taper MT: 2 tailstock quill stroke: 40 mmmetric threading: 0,2 - 3,5 mmthread - inch: 8 - 56 inch.thread - module: 0,2 - 12,5 mmswival range +/-: Oberschlitten 45 °connected load frequency: 400 Vtotal power requirement: 0,75 kWweight of the machine ca.: 0,15 tdimensions of the machine ca.: 1,41 x 0,61 x 0,41 mEquipped with- 2-axis digital measuring system with position indicator- manufactured according to DIN 8606- 27 mm spindle passage- adjustable guideways by adjustable strips- Strong engine with 0.75 kW- High resolution of the axis spindles for exact positioningDelivery:3-jaw chuck 100 mm, change gear set, splash guard 3-axisdigital measuring system fully assembled.The data for this ad was created with M ...
approved
dealer
dealer
turning diameter over bed: 1300 mmturning diameter over slide rest: 900 mmturning length: 8000 mmspindle diameter: 153 mmtotal power requirement: 37 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter: 300 mmturning length: 1500 mmcontrol: FanucSystem 6 T total power requirement: kWweight of the machine ca.: 5 tdimensions of the machine ca.: 4x2x1,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter over bed: 1000 mmturning diameter over slide rest: 760 mmturning length: 5000 mmspindle bore: 82 mmturning speeds: 3,55-710 U/minfaceplate: 1000 mm3-jaw chuck: 500 mmsteady: 2 total power requirement: 22 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 8x2x1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobartype: 6.26HS-4.4 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 straight turning atchm. - working travel: . mmturret head: 8 thread cutting attachment: bar loader: LNZ Hydrobartotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter over bed: 2000 mmturning diameter over slide rest: 1050 mmturning length: 7000 mmspeed: 1,6 - 250 U/minvoltage: 380 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 straight turning atchm. - working travel: . mmturret head: 8 thread cutting attachment: bar loader: LNZ Hydrobartype: 6.32HS-4.4 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter: 400 mmturning length: 600 mmcontrol: swing diameter: 600 mmspindle bore: 73 mmchip conveyor: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobartotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter over bed: 400 mmturning diameter over slide rest: 235 mmturning length: 1000 mmturning dia. in gap: 560 mmspindle bore: 52 mmspindle taper: Größe 6, DIN 55029 spindle turning speed - stepless: 18 - 2120 U/minfeeds - longitudinal: 0,015 - 0,6 mm/Uface feeds: 0,0075 - 0,3 thread - mm pitch: 0.25 - 7,5 mmthread - inch: 4 - 120 Gang / inch.tailstock quill diameter: 50 mmtailstock quill taper metric: MT 4 tailstock quill stroke: 120 mmmax. workpiece weight between centres: 500 kgvoltage: 400 V / 50 Hzspindle motor: 5,5 kWtotal power requirement: 7,5 kWweight of the machine ca.: 1,85 tdimensions of the machine ca.: 2,9 x 1,2 x 1,5 m• stepless adjustable turning speed via frequency converter, digital display,2-axe-DRO, Made:NEWALLThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter: 290 mmturning length: 850 mmswing diameter: 600 mmcontrol: Siemens type: 840 D mmspindle passage: 103 mmturning speeds: 3000 U/minlive tooling: 3000 U/minrapid travel - grinding spindle: 25 m/mintotal power requirement: 65 kWweight of the machine ca.: 11 tdimensions of the machine ca.: mOffer price without toolsOptionally, the accessories can also be purchased: 106 steel holders for indoor and outdoor use.External machining, 20driven tools(including 10 x angle tools) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter: 720 mmturning length: 4000 mmcontrol: Siemens 805 turn - diameter over facing slide: 360 mmspindle diameter: 100 mmspindle passage: 100 mm3-jaw-chuck diameter: 400 mm4-jaw-chuck diameter: 250 mmsteady: 360 mmtotal power requirement: 22 kWweight of the machine ca.: tdimensions of the machine ca.: m3- jaw chuck diameter: 400 mm 4- jaw chuck diameter: 250 mm Fixed bezel diameter: 360 mmIncludes: 4 jaw turrets and coolant.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter over bed: 2100 mmturning diameter over slide rest: 1300 mmturning length: 6800 mmworkpiece weight: 25000 kgmain drive motor: 140 kWControl: Siemens type: 840 C faceplate: 1100 mmbed width: 2500 mmsteady: 800 mmsteady: 800 mmsteady: 800 mmsteady: 600 mmchip conveyor: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter: 302 mmturning length: 600 mmcontrol: Siemens type: 810 T tail stock: Tool changer: 12 Pos.tool taper: VDI 30 chip conveyor: 3-jaw-chuck diameter: 200 mmswing diameter: 400 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter over bed: 460 mmturning diameter over slide rest: 274 mmturning length: 1000 mmturning dia. in gap: 690 mmspindle bore: 58 mmspindle turning speed range: 25-2000 U/minfeeds - longitudinal: 0,031-1,7 mm/Uvoltage: 400 V / 50 Hztotal power requirement: 5,5 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,3 x 1,0 x 1,5 m• with 3- and 4- jaw chuck,• 2 axis-digital display NEWALL, • fixed and live steady,• Machine light.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter over bed: 460 mmturning diameter over slide rest: 274 mmturning length: 1500 mmspindle bore: 58 mmspindle turning speed range: 25 - 2000 U/minturning dia. in gap: 690 mmmetric threading: 41 / 0,1 - 14 mmthread - inch: 60 / 2 - 112 inch.thread - module: 34 / 0,1 - 7 mmWhitworth-thread: 60 / 2 - 112 TPIadjustment of the upper slide: 140 mmdia. of quill: 60 mmquill stroke: 120 mmtotal power requirement: 5,5 kWweight of the machine ca.: 1,7 / 2,0 tdimensions of the machine ca.: 2,2 x 1,0 x 1,3 mA comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fittedas standard and a variable speed option is available. Huvema lathes fullyconform to CE regulations. Also available in: 1,5m3 jaw chuck4 jaw chuckNe ...
approved
dealer
dealer
turning diameter over bed: 360 mmturning diameter over slide rest: 220 mmturning length: 1000 mmturning dia. in gap: 515 mmspindle bore: 38 mmspindle turning speed range: 30 - 2200 U/minfeeds - longitudinal: 0,067 - 1,485 mm/Ufeeds - cross: 0,033 - 0,742 mm/Uvoltage: 400 V / 50 Hztotal power requirement: 2,5 kWweight of the machine ca.: 0,75 tdimensions of the machine ca.: 2,3 x 1,0 x 1,5 m• with 3- and 4- jaw chuck,• 2 axis-digital display NEWALL, • fixed and live steady,• Machine light.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter over bed: 460 mmturning diameter over slide rest: 274 mmturning length: 2000 mmspindle bore: 58 mmspindle turning speed range: 25 - 2000 U/minturning dia. in gap: 690 mmmetric threading: 41 / 0,1 - 14 mmthread - inch: 60 / 2 - 112 inch.thread - module: 34 / 0,1 - 7 mmWhitworth-thread: 60 / 2 - 112 TPIadjustment of the upper slide: 140 mmdia. of quill: 60 mmquill stroke: 120 mmtotal power requirement: 5,5 kWweight of the machine ca.: 1,7 / 2,0 tdimensions of the machine ca.: 2,2 x 1,0 x 1,3 mA comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fittedas standard and a variable speed option is available. Huvema lathes fullyconform to CE regulations. Also available in: 1,5m3 jaw chuck4 jaw chuckNe ...
approved
dealer
dealer
turning diameter over bed: 1090 mmturning diameter over slide rest: 690 mmturning length: 5000 mmspindle bore: 146 mmspindle taper: DIN 55027/15 turning diameter in the gap: 1250 mmbed width: 700 mmquick change tool holder: Größe D1 spindle turning speed range: 3,5 - 1000, stufenlos U/minfeeds - longitudinal: 1-3000 mm/minfeeds - cross: 1-3000 mm/minrapid travel - longitudinal/face: 6000 mm/minthread - mm pitch: 0,5 - 480 mmthread - inch: 60 - 1/16 Gang / inch.thread - module: 0,125 - 120 voltage: 400 V / 50 Hzmain drive: 30 kWControl: total power requirement: 35 KVAweight of the machine ca.: 7,2 tdimensions of the machine ca.: 7,2 x 1,75 x 1,9 m• new heavy duty lathe with infinetely variable rotation speed via frequency converter,• at basic price with normal accessories according to list,• possible special acccessories according to separate make-up.The data for this ad was cre ...
approved
dealer
dealer
turning diameter over bed: 460 mmturning diameter over slide rest: 274 mmturning length: 1000 mmspindle bore: 58 mmturning dia. in gap: 690 mmspindle taper: Größe 6, DIN 55029 spindle turning speed - stepless: 30 - 2000 U/minfeeds - longitudinal: 0,031 - 1,7 mm/Uthread - mm pitch: 0,1 - 14 mmthread - inch: 2 - 112 Gang / inch.tailstock quill diameter: 60 mmtailstock quill taper metric: MT 4 tailstock quill stroke: 120 mmmax. workpiece weight between centres: 500 kgvoltage: 400 V / 50 Hzspindle motor: 5,5 kWtotal power requirement: 6 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,9 x 1,2 x 1,5 m• stepless adjustable turning speed via frequency converter, digital display,2-axe-DRO, Made:NEWALLThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
turning diameter: 630 mmturning length: 200 mmcontrol: MTC K turning diameter over slide rest: 360 mmturning speeds: 1800 U/min3-jaw chuck: 315 mmHolder Multifix: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 straight turning atchm. - working travel: . mmturret head: 8 thread cutting attachment: bar loader: LNZ Hydrobartotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
spindle passage: 25 mmturning speeds: 5750 U/minRest: 4 turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobartype: 6.30HS-4.4 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
faceplate diameter: 2500 mmswing diameter: 3200 mmturning height: 3100 mmControl: R&D type: MTC 2x-2 workpiece weight: 20000 kgslide adjustment: 1600 mmside head - cross travel: 1000 mmTool changer: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
