other metal working machines used for sale (11,281)

A Mitsubishi wire EDM machine including an automatic wire changer (AWF system) is available. Travel X/Y: 381mm/749mm, table dimensions X/Y: 647mm/797mm, max. workpiece dimensions X/Y/Z: 647mm/749mm/259mm, max. workpiece weight: 950kg. Machine dimensions X/Y/Z: approx. 1850mm/2600mm/1950mm, weight: approx. 4100kg. Including 12 wire spools and one ceramic replacement plate. The wire changer is defective. Documentation available. An on-site inspection is possible.

Manufacturer: Heller Model: MC 16.1 Year of Manufacture : 2004 /2005 Technical Specifications Spindle - Motor spindle speed: 16,000 rpm - Tool holder: HSK 63 Setup / Clamping Area - Hydraulic clamping for fixtures - Pneumatic workpiece support control Tool System - Tool magazine capacity: 40 tools - Drill breakage detection Working Area (Axis Travel) - X-axis travel: 630 mm - Y-axis travel: 630 mm - Z-axis travel: 630 mm Coolant System - Knoll coolant system - Maximum tool coolant pressure: 30 bar Hydraulic System - System pressure: 60 bar Find more here - / Contact us at -

Manufacturer: IGM Model: RTE 497-S Year of Manufacture: 2021 Technical Specifications Robot System - Control system: Fully digital PC robot control, type RCE - Software: Windows 10 & Linux-based system with IGM robot software K6 - Welding process: 135 (GMAW), single-wire, wire diameter 1.2 mm - Welding power source: Digital inverter welding power source TPS 500i - Output: 500 A at 40% duty cycle - Robot periphery: Rotating boom for floor installation, boom length 2.5 m - Number of workstations: 1 Workstation - 3-axis L-manipulator with lifting device - Nominal load capacity: 2 t Safety Equipment - Pistol safety shut-down in wrist axis - Emergency stop on hand tablet, manipulators, and control panel - Three-colour warning light for operating status - Safety partition - Safety door Robot Dimensions and Performance - Travel path: 5,000 mm - Arm length: 2,500 mm - Lift: 1,000 mm  ...

Manufacturer: Amada Model: STPC Year of Manufacture: 1990 Maximum Press Force: 160 kN Maximum Stroke: 220 mm Nominal Current: 345 A Number of Phases: 3 Power Supply: 380 V / 50 Hz Installed Power: 12 kW Machine Weight: 1,150 kg Find more here - / Contact us at -

x-travel: 3.500 mmy-travel: 2.600 mmz-travel: 1.000 mmControl: HEIDENHAIN iTNC-530 table-size: 4.500 x 1.500 mmdistance between columns: 2.300 mmrapid motion - x-axis: 15.000 mm/minrapid traverse: Y,Z 12.000 m/minfeed: 5.000 m/mintool taper: ISO 50 number of spindle speeds: 5.000 U/min/rpmmilling head -swivable: UAGA 3.000 U/min 45 Gradspindle drive: 22 kWtransmission ratio: 2 table weight: 15.000 KgTools changer: 30 fach/toolshandwheel: HEIDENHAIN HR 410 air pressure: 6 bartotal power requirement: 44 kWweight of the machine ca.: 25 tdimensions of the machine ca.: m- Auto Indexing Head 2, 5º /2.5º- Automatic Support in the right side for Head UAGA- Direct Output Head.- Automatic Head Changer- Automatic tools changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Nominal temperature / continuous temperature up to 1150 ° - Temperature infinitely variable - Temperature display - Drive 400 V / 5 kW - Interior dimensions approx. W 160 x H 160 x D 360 mm - Space requirement approx. W 850 x H 700 x D 600 mm - Weight approx. 140 kg

SHUZ TUNG NCR38B tube and profile bending machine was built in 2008 in Taiwan by SHUZ TUNG MACHINERY INDUSTRIAL CO., LTD. The machine, distinguished by its high precision and ease of operation, enables automatic bending and forming of arches from tubes or profiles with a maximum diameter of 38 mm. All process parameters, including even the most complex shapes, are programmed in the intuitive NC controller with memory for up to 500 work programmes. The NCR38B mandrel bending machine is offered with equipment, consisting of, among others, tooling for tubes with 16, 22 and 25 mm diameters. The total weight of the machine is 1500 kg. Technical specifications of the SHUZ TUNG NCR38B tube bending machine - bending capacity: 38×2 mm - bending angle: 0-190° - maximum bending radius: 170 mm - mandrel length: 1800 mm - bending speed: 45°/s - rotation speed: 240°/s - bending accuracy: ...

Vertical Belt Sander TMUA Table size: Width 325 mm x Depth 210 mm Motor: 5,5 kW Band Length: 1800 mm Band width: 125 mm Voltage: 380 V Year of construction: 1990 - Machine in very good condition Width: 900 mm Depth: 900 mm Total height: 1600 mm Weight: approx 250 kg

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sawblade tiltable: °cutting width: mmMotor output: kWCutting height: mmSaw blade diameter: mmTable dimensions: mmSaw blade: mmDimensions (L/W/H): mmmachine weight ab.: kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): mmthroat: mmbore stroke: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stroke: 16-140 mmpressure: 75 tweight: 4,6 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Air consumption: 120 m³/hPressure power: 10 barpower requirement: 15 kWPacking: ca. 1,20,81,4 mShipping weight: 300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2040 mmplate thickness: 4,00 mmdistance between columns: mmupper beam stroke: 350 mmtotal power requirement: kWweight of the machine ca.: ca.4,00 tdimensions of the machine ca.: mManual and automatic bending sequence possibleBending angle adjustable via potentiometerUpper jaw stroke height and material thickness selectable via DIP switchesBending rail in excellent conditionManual backgauge with spring fingersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Measuring range: 600 mmmeasuring system resolution capability: 0.001 mmweight: 30 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0°→135° kantel capaciteit afstandsbediening met regelbare snelheid draaiende tafel : 360° 4 klemmen op de tafel Diameter tafel: 2000 mmMANIPULATOR: yes Capacity: 9450 kg Table dimentions: Diameter: 9450 kg - 1720 kg

nbsp;

Rosink RFL Front Loader - Powerful water-based cleansing -Modular - Cleaning of tall and long components - Easy operation, compact design - Low-maintenance operation - Basic system in stainless steel design -Environmentally friendly Conception With the Rosink RFL front loader, we offer you an economical and user-friendly solution - particularly suitable for cleaning tall components. The proven Rosink cleaning technology and the highest quality are thus combined in one system. The basis is a 1-bath system, standard with a turntable, which can be expanded to a multi-bath system on request. Depending on the equipment and needs, different programs can be run inside the washing chamber, such as washing, rinsing, drying, etc. Equipment Basic system in stainless steel version 1.4301 Tank with sloping floor Tanks and washing chamber incl. cladding and insulation Slewi ...