other metal working machines used for sale (11,236)

Equipment: 1 pliers feed right 4 Carriage Units Working Range: Wire thickness range: 0.5 - 2.0 mm Band width: up to 10.0 mm Length of move; up to 100 mm Output: up to 300 rpm

Equipment: 1 piece BIHLER noise protection cabin 1 piece pliers feed right 1 piece eccentric press 70 kN 4 Norma sled units 1 piece narrow sled unit Working Range: Wire thickness range: 0.5 - 3.5 mm Strap width: up to 32 mm Feed length: up to 170 mm Power: up to 250 rpm

Equipment: 1 Carriage Feed Right 1 eccentric press 250 kN 4 normal carriage units 1 narrow carriage unit Working Range: Wire thickness range: up to 6.0 mm Strip width: up to 80 mm Feed length: up to 250 mm Power: 10 - 250 rpm

Drive motor: 400 V, 0.55 kW, 2,800 rpm. Thread diameter range: M 1 - M 6 Spindle stroke: max. 15 mm Output: max. 120 rpm

Wire gauge range: 1.5 - 7.0 mm Section lengths: up to 8,000 mm Feed speed:

Load capacity: max. 1,500 kg. Wire thickness range: 0.5 - 9.0 mm Waistband-outer diameter. max. 1,000 mm Waistband-inner diameter. min. 300 mm Speed: 0 - 80 rpm

Load capacity: max. 1,500 kg. Wire gauge range; 0.5 - 6.0 mm Coil diameter: max. 1,000 mm Speed: 0 - 80 rpm,

Wire gauge range: 1.5 - 7.0 mm Section lengths: max. 1,000 mm Feed speed: 29 - 90 mtr./min

Wire diameter range: 2.5 - 7.0 mm Section lengths: max. 4,000 mm Feed speed; 40 - 80 ntr/min complete with non-driven wire reel

Horizontal machining center Toyoda FH550S Year of manufacture: 09/2005 Control: Fanuc Description: X-axis: 750 mm Y-axis: 800 mm Z-axis: 850 mm Pallet: 550 x 500 mm Spindle power: 21.6 kW Spindle speed: 15,000 rpm Magazine: 60 tool positions chain magazine Coolant: Knoll high-pressure system Machine time: 83,000 hours Spindle/feed time: 20,000 hours Approx. space requirement: 3000x5700x2770mm Machine weight: 16,000 kg Horizontal machining center Find more here - / Contact us at -

length: 3000 mmwidth: 2000 mmheight: 250 mmweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3 2 0,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 2000 mmwidth: 2000 mmheight: 350 mmtotal power requirement: - kWweight of the machine ca.: 4,2 tdimensions of the machine ca.: 220,9 mSonderpreis EXWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal 750 kgMANIPULATOR: yes Capacity: 750 kg Table dimentions: dia 1000 mm Voltage: 220 volt Weight: 2600 kg

Bilanciai D70 scale

Bij het mengen van vloeistoffen spreken we van homogenisatie of blending wanneer twee niet (volledig) gelijke vloeistoffen worden gemengd met als doel een homogeen mengsel te verkrijgen. De moleculen van de ene stof worden dan volledig gelijkmatig verdeeld in de andere stof en concentratie- en temperatuurverschillen worden volledig geëgaliseerd. Bij dit proces is de mengtijd van belang, dat wil zeggen de tijd die nodig is om de concentratie- of temperatuurverschillen tot een bepaald niveau te reduceren.

Deze watertank is geschikt voor de opslag van drinkwater en vele andere vloeistoffen. De tanks hebben een wanddikte van circa 6 mm. Aan de boven- en onderkant van de tanks kunnen aansluitingen voor inlaat en uitlaat worden aangebracht. De tank wordt geleverd zonder gemonteerde aansluitingen. Maximale inhoud: 3000 liter Diameter: 1450 mm Hoogte: 2050 mm Gewicht: 70 kg Afmeting deksel: 400 mm 2 exemplaren beschikbaar

6 + 6 meter rollenbanen voorzien van handmatige achteraanslag en digitale uitlezing Rollenbanen zijn in hoogte verstelbaar. maximale breedte 500 mm inclusief verbindingsstukken om de rollenbanen aan uw machine te kunnen bevestigen

- drie aangedreven rollen - de twee onderste rollen zijn verstelbaarDia rolls: 117/227 mm Dia of die mandrel: 30 mm Rotationspeed: 20 rpm Motorpower: 2 HP Length : 900 mm Depth: 680 mm Height: 1360 mm Weight: 200 kg

SCHNELL SHEAR LINE 300 rebar cutting and bending line was built in 2008 in Italy by Schnell S.p.a. The electrical installation was overhauled in 2024. The SCHNELL SHEAR LINE 300 is a reliable system designed for serial machining of rebar with a maximum diameter of 50 mm. It integrates all the necessary equipment that is responsible for cutting, bending, optimising, storing and handling bars. The entire production cycle, from feeding to the collection of the finished parts, is performed fully automatically. The SCHNELL SL 300 stirrup production machine is fully complete and consists of the following components: – control console – FA/6/14 storage rack for steel – SCHNELL CGS 300 HDY guillotine shears – SCHNELL VBM 12/2 measuring and cutting track with single-sided unloading – SCHNELL ROBOMASTER 45 automatic rebar bending machine – rebar storage and retrieval system ...

pressure: 1000 tdistance between columns: - mmstroke: 200 mmtotal power requirement: 30 kWweight of the machine ca.: 8 tmultiple images availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

boring spindle diameter: 130 mmtaper: ISO 50-7388/1 milling spindle diameter: 200 mmdirect current motor: 22 kW: 10-1600 U/l rapid traverse: der Achsen 6000 m/minz-axis: 800 mmy-axis: 2100 mmx-axis: 3000 mmw-axis: 1500 mmSize of table plate: 1250 x 1500 mmtable movement: max. 10000 KG kW: im Eilgang 3,5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: - mmplate thickness: - mmdistance between columns: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.