other metal working machines used for sale (11,265)

De TVM 302 ( meetbereik ~320 mm / ~12 inch) heeft de volgende typische specificaties: Meetbereik: 320 mm (12 inch) Maximaal toegestane fout: 0,02 mm Herhaalbaarheid (2 s): 0,005 mm Frontale vierkantheidsafwijking: 0,02 mm Resolutie: 0,01 mm / 0,001 mm (of in inches .0005/.00005) afhankelijk van het beeldscherm Meetkracht : ca. 3 N Maximale verplaatsingssnelheid van de handmatige wagen : 1500 mm/s. Gegevensuitvoer: Opto-RS232. laboaragon.com+1 Bedrijfstemperatuur : +10 °C tot +40 °C; Opslag: -10 °C tot +40 °C. Gewicht (gietijzeren voet): ~6 kg. 4 keer op voorraad

Bouw-/werkverplaatsingen (veelgenoemde waarden): X-as (longitudinaal): ~200–300 mm Y-as (dwars): ~200–400 mm Z-as (verticaal / hoogte): ~127–450 mm Tafel / opspanvlak (veel voorkomende afmetingen): ca. 600 × 430 mm of opspanvlak 250 × 700 mm 1.3 kW nbsp;Speeds: 50-10 000 rpm Weight: 1300 kg

Type: Ultrix 800 RT The Ultrix 800 RT is a multifunction machining center with 5 interpolated axes and a moving gantry for high-speed milling, turning, grinding, drilling, tapping, finishing, deburring, and roughing of complex parts. When used for turning gt; vertical lathe: - swivel range: 1100 mm - maximum weight of the workpiece: 700 kg - 40/30 kW on the table - max. torque on the table: 1500 Nm - maximum speed of the table: 1000 rpm - hydraulic clamping on table - tool taper for turning: KM63 - 150-position tool changer with 24 tool positions for turning When used for milling, grinding, drilling, ... gt; machining center: - X-axis: 800 mm - Y-axis: 900 mm - Z-axis: 600 mm - A-axis: -30° / 110° - C-axis: continuous - maximum weight of the workpiece: 700 kg - 55/40 kW on spindle - max. torque on the spindle: 22 Nm - max 40,000 rpm - tool taper for milling: HSK-E40 - 150-position to ...

ORT RP30 MS 2-roll 30 tons, thread rolling, knurling, small gears, 2009 = YOM, Electronic overhaul and electronic retrofit with Siemens PLC (2025) The machine is visible working in our warehouse in Gussago BS. Possibility of proof M i m u Machine Tools, Power (Ton): 30, Number of rollers: 2, PLC: Yes

feed pressure: 10 barliter capacity: 2,71 m³ / minmotor speeds:: 3000 U/mindimensions: 1300 x 1000 x 1900 mmtotal power requirement: 18,5 kWweight of the machine ca.: 500 kgFeatures:- Focus Control 2.0 control system- Network pressure sensor- Belt-driven drive system- SoundproofedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Laser cutting machine Type: MSF 4001.20Ltk+T500 4kW IPG Manufacturer: MicroStep Year: 2016 Working area: 4000 x 2000mm + space for pipe cutting Laser: 4000 W IPG Linear guides Rexroth Gear racks Precision helical gears ATLANTA on all axes, double-sided driven portal STOBER gearboxes Drives maintenance-free, processor-controlled AC-servos Panasonic Max. positioning speed 130 m/min - one axis, 180 m/min simultaneously 2 axes. Acceleration 10 m/s2 Z-axis positioning speed 50 m/min Z-axis travel 150 mm Z-axis acceleration 0.75 G Position deviation Pa 0.07 mm in accordance with VDI/DGQ 3441 Repeat return accuracy Ps 0.03 mm in accordance with VDI/DGQ 3441 Ambient operating temperature +10 °C to +35 °C Relative humidity 0 to 90 % Machine in very good condition, under power Find more here - / Contact us at -

Jesco JAGUAR 2260 — a CNC lathe machine. Type of machine: CNC turning lathe Specifications: - Manufacturer: Jesco Machinery Ltd. - Model: JAGUAR 2260 - Swing over bed: 560 mm - Centre height: 280 mm - Max turning length (distance between centres): 1500 mm - Spindle bore: 80 mm - Control unit: FAGOR 8060 - Country of origin: Taiwan The machine is in very good condition and has been used very little. Find more here - / Contact us at -

ONE Bending Testing Machine Load range up to 200kN Class 2 in the load range 40kN Class 1 in the load range 100kN Class 1 in the load range 200kN Indoor crane available for dismantling

Laser cutting machine Trumpf Trulaser 3030

Manufacturer: FRECH Model: DAW 125 S RC Year of Manufacture:1998 Type of Machine : zinc die-casting system Condition : The machine is fully functional and was used to manufacture bathroom accessories (shower handles). After just over a year of downtime, an oil change is required. Locking Force: 1250 kN Working Pressure: 105 bar Machine Weight: 6000 kg Rated Current: 40 A Rated Voltage: 3×400 V Control Voltage: 24 V Frequency: 50 Hz Find more here - / Contact us at -

Paletchanger 2 tafels Hoge druk koeling 15 bar Schroottransportband Maximale werkstukafmetingen: 3240 x 880 x 640 mmX-axis: 3000 mm Y-axis: 800 mm Z-axis: 585 mm Table dimensions: 3240 x 750 mm Max weight on the table: 3 ton Passage between uprights: 860 mm Admission in spindle (ISO): ISO 50 Power on the spindle: 30 kW Control : Mazatrol 640 Toolchanger: yes Number of toolholders: 40 positions Number of rotations: max 6000 rpm Number of pallets: (2x) 750 x 3240 mm Length: 3274 mm Depth: 8100 mm Height: 3546 mm Weight: 19 ton

The SIP Sirius 7 is a high-precision fixed-bridge Coordinate Measuring Machine (CMM) designed for dimensional inspection and quality control in manufacturing environments. Sirius 7 is known for its robust construction and hydrostatic bearing system, ensuring smooth and accurate measurements. Key Specifications • Measuring Range: 1,000 mm × 1,000 mm × 800 mm (X × Y × Z) • Accuracy: ±4 µm (micrometers) • Repeatability: ±2 µm • Guide System: Hydrostatic bearings • Temperature Compensation: Yes • Control Type: Manual (standard), with options for digital or CNC control systems • Probe System: Typically equipped with Renishaw or similar touch-trigger probes • Software Compatibility: Compatible with various metrology software platforms, including PC-DMIS and others

EDM machine Makino DUO64 vintage 2011.

Manufacturer:GRIMME Model: G-DT-F 12/10 SB Year of Manufacture: 2015 Power: 24.5 kW Voltage: 230 / 400 V Frequency: 50 Hz Motor Type: SERVO Spindle Type: Z80-K530.04 Drive Type: SIE / HD Certification: CE Find more here - / Contact us at -

Manufacturer: Reichenbacher Model: ECO RS3 Year of Manufacture: 2016 Type of Machine : 5 Axis Milling Machine CE Certified: Yes Find more here - / Contact us at -

A Nabertherm circulating air chamber furnace is available. Connected load: 30kW, max. temperature: 650°C, volume: 500l, heating-up time: approx. 60min, internal dimensions X/Y/Z: 750mm/1000mm/750mm. Machine dimensions: approx. 1300mm/1900mm/1850mm, weight: approx. 750kg. Documentation available. On-site inspection possible.

3D coordinate measuring machine XM 1600 control unit Measuring range on the table 200 x 200 x 200 mm Maximum measuring range 2000 x 1200 x 1000 mm Accuracy: +/- 7μm Repeatability: +/- 3μm

The Model 208B BEVELMASTER™ Air is a portable ID mounting weld end preparation machine tool for beveling, facing and counterboring 2" through 8" pipe. The tool is configured with an in-line feed knob and pneumatic drive motor at a right angle to the lathe head. The Model

Lincoln Statiflex 200-M

Demag hoist DCS PRO 10-1000 1 TON

Danoflex Ø 800 mm cylindrical abrasive grinding