other metal working machines used for sale (10,783)

A Mitsubishi wire EDM machine including an automatic wire changer (AWF system) is available. Travel X/Y: 381mm/749mm, table dimensions X/Y: 647mm/797mm, max. workpiece dimensions X/Y/Z: 647mm/749mm/259mm, max. workpiece weight: 950kg. Machine dimensions X/Y/Z: approx. 1850mm/2600mm/1950mm, weight: approx. 4100kg. Including 12 wire spools and one ceramic replacement plate. The wire changer is defective. Documentation available. An on-site inspection is possible.

Manufacturer: IGM Model: RTE 497-S Year of Manufacture: 2021 Technical Specifications Robot System - Control system: Fully digital PC robot control, type RCE - Software: Windows 10 & Linux-based system with IGM robot software K6 - Welding process: 135 (GMAW), single-wire, wire diameter 1.2 mm - Welding power source: Digital inverter welding power source TPS 500i - Output: 500 A at 40% duty cycle - Robot periphery: Rotating boom for floor installation, boom length 2.5 m - Number of workstations: 1 Workstation - 3-axis L-manipulator with lifting device - Nominal load capacity: 2 t Safety Equipment - Pistol safety shut-down in wrist axis - Emergency stop on hand tablet, manipulators, and control panel - Three-colour warning light for operating status - Safety partition - Safety door Robot Dimensions and Performance - Travel path: 5,000 mm - Arm length: 2,500 mm - Lift: 1,000 mm  ...

Manufacturer: Amada Model: STPC Year of Manufacture: 1990 Maximum Press Force: 160 kN Maximum Stroke: 220 mm Nominal Current: 345 A Number of Phases: 3 Power Supply: 380 V / 50 Hz Installed Power: 12 kW Machine Weight: 1,150 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

x-travel: 3.500 mmy-travel: 2.600 mmz-travel: 1.000 mmControl: HEIDENHAIN iTNC-530 table-size: 4.500 x 1.500 mmdistance between columns: 2.300 mmrapid motion - x-axis: 15.000 mm/minrapid traverse: Y,Z 12.000 m/minfeed: 5.000 m/mintool taper: ISO 50 number of spindle speeds: 5.000 U/min/rpmmilling head -swivable: UAGA 3.000 U/min 45 Gradspindle drive: 22 kWtransmission ratio: 2 table weight: 15.000 KgTools changer: 30 fach/toolshandwheel: HEIDENHAIN HR 410 air pressure: 6 bartotal power requirement: 44 kWweight of the machine ca.: 25 tdimensions of the machine ca.: m- Auto Indexing Head 2, 5º /2.5º- Automatic Support in the right side for Head UAGA- Direct Output Head.- Automatic Head Changer- Automatic tools changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Nominal temperature / continuous temperature up to 1150 ° - Temperature infinitely variable - Temperature display - Drive 400 V / 5 kW - Interior dimensions approx. W 160 x H 160 x D 360 mm - Space requirement approx. W 850 x H 700 x D 600 mm - Weight approx. 140 kg

Sawblade tiltable: °cutting width: mmMotor output: kWCutting height: mmSaw blade diameter: mmTable dimensions: mmSaw blade: mmDimensions (L/W/H): mmmachine weight ab.: kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2040 mmplate thickness: 4,00 mmdistance between columns: mmupper beam stroke: 350 mmtotal power requirement: kWweight of the machine ca.: ca.4,00 tdimensions of the machine ca.: mManual and automatic bending sequence possibleBending angle adjustable via potentiometerUpper jaw stroke height and material thickness selectable via DIP switchesBending rail in excellent conditionManual backgauge with spring fingersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Measuring range: 600 mmmeasuring system resolution capability: 0.001 mmweight: 30 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: WMS Model: W10 Year of Manufacture: 2014 Weight: 2800 kg Connected Load: 23 kW Rated Current: 33 A Operating Voltage: 400 V / 50 Hz Control Voltage 1: 24 V Control Voltage 2: not specified in plate Air Consumption: 9 m³/h System Pressure: 6 bar Certification: CE Find more here - .ucymachines/ Contact us at - sales@ucymachines

arm length: 1600 mmtaper MK: 5 : Würfel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chuck: 380 mm: Vierte Achse weight of the machine ca.: 280 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offered is a cleaning and degreasing system with steam extraction fan and oil skimmer, year of construction 1996, basket: Ø720mm, internal height: 140mm, workpiece: maximum usable height: 450mm, maximum batch weight: 500kg, overhaul: 2011: completely overhauled, renewed: gear motor, heater, gas spring and heating elements, documentation: operating manual, technical documentation and CE declaration of conformity available, overall dimensions X/Y/Z: 1190mm/1170mm/1170mm, weight: approx. 290kg. Inspection: possible by appointment.

Radial Drilling Machine GSP type 44 T 12 Spindle: CM4 Spindle exit: 300 mm Arm travel: 1000 mm Max height swivel table/spindle nose in height position: 700 mm Max height table/spindle nos ein height position: 1300 mm Swivel table +/- 90 Swivel table dimensions: 1000 x 400 mm Spindle motor: 3,7 kW False table Length 1000 mm x Width 800 mm Auto descent Mechanical locking Lubricant pump Spindle rotation left/right Rotation at 360° around the column Voltage: 380 V Length: 2100 mm Width: 1000 mm Total height in height position: 2700 mm Total height in low position: 2400 mm Weight: approx 2,5 T

CNC vertical lathe Type: SKJ 12 NC Manufacturer: TOS Modernization: 2002 Control: Mefi CNC 856 Max workpiece diameter: 1400 mm Clamping plate diameter: 1250 mm Maximum workpiece height: 1150 mm Maximum workpiece weight: 6000 kg Clamping plate speed: 2.5 - 225 rpm Main motor power: 37 kW Machine weight: 13000 kg In good condition, fully functional Find more here - .ucymachines/ Contact us at - sales@ucymachines

A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/ ...