other metal working machines used for sale (10,892)

Laser cutting machine Trumpf Trumatic L 4030

Usable furnace width: 600mm, usable furnace height: 310mm, clear passage height: 350mm, furnace zone length: 3500mm, number of heating zones: 3, radiant tube control: On/Off, radiant tube monitoring: via UV cell, max. temperature: 1050°C, operating temperature: approx. 800-1000°C, material processed: transformer and slit-strip cores, net/gross throughput: 750/860kg/h, max. grate load: 250kg, permissible grate weight: 50kg, cycle time per grate: approx. 20min, heating, equalizing, holding: approx. 850°C, approx. 120min, cooling: from approx. 850°C to below approx. 200°C in approx. 180min, number of grates: inlet lock: 1, annealing furnace: 6, furnace neck: 1, cooling section: 9, outlet lock: 0, grate return transport (buffer): 18, grate width: 600mm, grate length: 600mm, grate height: 60mm, overall grate height: 210mm, frame height: 150mm, weight per grate: approx. 50kg, annealing fu ...

A Bosch OBD 10/53L 12 and a Bosch OBD 15/54L 17 are available, strip width: 250mm, usable height: 260mm, number of furnace doors: 3, doors: inlet, intermediate and outlet door, strip speed: 1.8m/min, cycle time: 25min, cycle distance: 700mm, operating temperature of decarburizing zone: 760°C, operating temperature of bluing zone: 550°C, heating capacity of decarburizing zone: 84kW, heating capacity of bluing zone: 18kW, evaporator heating capacity: 3kW, evaporator water consumption: approx. 0.5l distilled water/h, energy consumption: approx. 45kWh/100kg net weight, total decarburizing time: 150min, cycle time: 25min, cycles in the decarburizing zone: 6, decarburizing zone temperature: 760°C, holding time: 30min, propane/air ratio for protective gas generation: 1:18, protective gas quantity: approx. 35Nm³/h, propane quantity: 2Nm³/h, air quantity: 36Nm³/h, combustion tower temperatu ...

dimensions:: innen 1160 x 870 x 850 mmAir consumption: 400 - 800 l/min.air pressure: 3,4 - 8,0 barworkpiece weight: max. 150 kgtotal power requirement: 1,2 kWweight: 160 kgrange L-W-H: 1320 x 1200 x 1760 mmFurnishing:- Very large front flap that opens upwards- Suitable for various blasting materials e.g. quartz, glass ball, plastic ball, etc.- Integrated suction system with exchangeable air filter- Jet gun without a finger trigger The air flow is controlled by a foot pedal- Four fluorescent tubes (230 volts) in a separate housing with protective screen and exchangeable protective film- Switch for suction and cabin lighting Regulation of the working pressure via pressure regulator with manometer- Jet head (grain size 0.125 - 0.42 mm can be used)- Cross struts on the feet easy transport with the pallet truck- Container for blasting material- dust extraction- foot switch- Operating instruct ...

width of the strips: mmband length: mmband speed: m/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10 barliter capacity: 2,71 m³ / minmotor speeds:: 3000 U/mindimensions: 1300 x 1000 x 1900 mmtotal power requirement: 18,5 kWweight of the machine ca.: 500 kgFeatures:- Focus Control 2.0 control system- Network pressure sensor- Belt-driven drive system- SoundproofedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 150x1750 mmspeed: 15/30 m/s: 83 dBengine output: 1,27/1,7 kWweight: 145 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmburner heads: 1 Control: CNC workpiece weight: 900 kgtraversing speed: 91 m/mindimensions of the machine ca.: 5562 x 2270 x 2388 mmLaser cutting machine with manual shuttle tableConfiguration1. BodorPower laser source 6 kW2. Bodor Genius laser cutting head with autofocus3. Bodor Thinker 3.0 control system4. Bed made of tenon and mortise structure5. Bodor servo motor and driver6. Nitrogen control valve7. Bodor Lightning perforation technology8. Automatic layout of residual material9. 21.5-inch monitor with touch function10. Automatic adjustment of cutting gas pressure11. Active anti-collision function12. Intelligent vibration protection13. Anti-burn mineral casting14. Bodor Mango® Ergonomic Remote Control15. Gas-saving nozzles with stable flow16. Intelligent maintenance reminder17. WIFI internet connection18. Water cooling19. Extraction system20.  ...

total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 430 mmtable width: 300 mmx-travel: 260 mmy-travel: 160 mmz-travel: 300 mmweight of the machine ca.: 0,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

groove width: mmx-travel: 1000 mmthroat: mmtable length: 1300 mmtable width: 300 mmtotal power requirement: 14 kWweight of the machine ca.: 3.2 trequired space: 2.9x3.1x2.7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

through-put width: 580 mmworking heigth: 580 mmair consumption: 400 - 800 l/minworking pressure: 3,4 - 8,0 barsuction capacity: 17,4 m³/htotal power requirement: 1,2 kWweight of the machine ca.: 115 kgdimensions of the machine ca.: 1225 x 935 x 1640 mmDescription- Suitable for various blasting materials, e.g., quartz, glass beads, plastic beads, etc.- Ideal for cleaning, derusting, or paint removal from all types of metal parts , e.g., engine parts, fittings, signs, housings, rims, hinges- High-quality latex work gloves are firmly attached to the housing- Optimal visibility and occupational safety during workpiece processing thanks to the viewing window with adhesive protective film- Dust-free working thanks to circumferential seals on the lid and door frame- Sturdy storage grid allows workpieces to be placed inside the cabin- With drain opening for changing the blasting material- Sucti ...

length: 2000 mmwidth: 1000 mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

movement of X-axis: 500 mmmovement of Y-axis: 350 mmvert. movement Z-axis: 256 mmworkpiece weight max.: 800 kgweight of the machine ca.: 4.5 t: +/- 70 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: bis M 24 turning speeds: max. 280 U/minthread: M5 - M24 working area: 2050 Rmax.work height max.: 900 mmtable surface area: 700 x 900 mmoil volume: 100 lengine output: 3.0 kWweight - pallet system: 280 kgEquipment:- electro-hydraulic tapping machine- Large working range (max. radius 2050 mm) Smooth swivel movement, e.g. due to built-in gas pressure dampers- Mobile machine base frame Oil tank hydraulic unit integrated in the base frame Hydraulic pressure gauge- Vertical / horizontal thread cutting possible- Connection cable with 16A plug Special accessories included in the scope of delivery :- Tap quick-change inserts according to DIN 376. M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22- Infinitely variable speed adjustment incl. digital display- Minimum quantity lubrication (spray oiler/compressed air)- T-slot clamping table- Tapping head can be fixed with magnetic ...

workpiece length: 2000 mmmax. workpiece diameter: 400 mmmin. workpiece diameter: mmbore spindle turning speed range: 260-1850 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working range: 1.050 x 650 x 250 mmmax. workpiece weight: 400 (800) kgcontrol: Agievision AGIEmax. conicity: 30° / 100mm travel -x axis: 500 mmtravel -y axis: 350 mmtravel -z axis: 426 mmtravel U x V-axis: +/-70 / +/-70 mmrapid traverse X-axis: 3 m/minrapid traverse Y-axis: 3 m/minrapid traverse U-axis: 0,6 m/minrapid traverse V-axis: 0,6 m/minrapid traverse Z-axis: 0,6 m/minwire dia.: 0,2...0,33 mmtotal power requirement: 12,1 kVAweight of the machine ca.: 3,9 tdimensions of the machine ca.: 2,8 x 2,4 x 2,3 mDocuments: Wire Eroding MachineAGIE - Agiecut Progress 3 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: bis M 36 turning speeds: max. 150 U/minthread: M5 - M36 working area: 2050 Rmax.work height max.: 900 mmtable surface area: 700 x 900 mmoil volume: 100 lengine output: 4.0 kWweight - pallet system: 320 kgequipment:- electro-hydraulic tapping machine- Large working range (max. radius 2050 mm) Smooth swivel movement, e.g. due to built-in gas pressure dampers- Mobile machine base frame Oil tank hydraulic unit integrated in the base frame Hydraulic pressure gauge- Vertical / horizontal thread cutting possible- Connection cable with 16A plug Special accessories included in the scope of delivery :- Tap quick-change inserts according to DIN 376. M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22. M27 / M30 / M33 / M36- Infinitely variable speed adjustment incl. digital display- Minimum quantity lubrication (spray oiler/compressed air)- T-slot clamping table- Tapping head ca ...

working heigth: mm0: 1000x500 mmtotal power requirement: kWweight of the machine ca.: 1.3 trequired space: 2.6x1.51x2.575 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: div. number: 36x tool adaptor: BT 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: / mmturning length: / mmworkpiece length: / mmDrum brakesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: div. number: 40x tool adaptor: BT 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: div. number: 40x tool adaptor: BT 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: div. number: 56x tool adaptor: BT 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: / mmthreading length: / mmthread pitch: / mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 10000 mmy-travel: 1500 mmz-travel: 2700 mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: div. number: 16x tool adaptor: SK 50 Tool Package DSSK 50Other quantities also possible!A total of approx. 600x SK 50 holder availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

laser capacity in Watt: WDimensions (L/W/H): 10000/2500 mmWeight: 3500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 5,0 tthroat: 215 mmworkpiece height max.: 445 mmMandrel diameter: 50 x 50 x 645 mmtable plate: Ø 275 mmtotal power requirement: manuell kWweight of the machine ca.: 160 kg.dimensions of the machine ca.: 370 x 550 x 810 mmDescription :- for pressing in and out of bearings, bushings, ...- the basic body of the model DP 5 made of high-quality gray cast iron- Includes mounting holes, ideal for mounting on a workbench- suitable for bushing, straightening, bending, broaching, ...- variably adjustable lever bar, depending on the required effort- ideal for repair shops and the general workshop areaThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 580 mmturning length: 1500 mmcontrol: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.