other metal working machines used for sale (10,893)

turning diameter: / mmturning length: / mmworkpiece length: / mmDrum brakesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: - tdiameter: 3 mmtotal power requirement: 2 kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1,5 x 1,5 x 2 mrivetting machineWorkspace: Ø 3The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 800 mmwidth: 600 mmheight: 1200 mmweight of the machine ca.: 0,4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

groove width: 6-20 mmdrawing length: - mmworking speed: - m/mintotal power requirement: 3 kWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 1 x 0,7 x 1,6 mNo. 0319Grooving machine with various drawing tools Frömag KZ-225 drawing tools in the sizes 6 / 8 / 10 / 12 / 20 mm5 holders for bores from 10-35 mmTransport dimensions approx. 1000 x600 x1600 mmWeight approx. 700 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 5000 mmplate depth: 2000 mmplate height: 400 mmtotal power requirement: kWweight of the machine ca.: 9,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 2000 mmwidth: 700 mmwork height max.: 900 mmdimensions of the machine ca.: 2,0 x 0,7 x 0,9 mweight: 130 kgWorkbench - Made in GermanyIndustrial quality, particularly robust and durable design for the highest demands!demands!Workbench top 45 mm thick made of high-quality multiplex beechThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

longitudinal travel: 400 mmcross travel: 160 mmtable length: - mmtable width: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10.0 barEffective free air delivery: 700 L/minmotor: 400 V0: 250 Literweight of the machine ca.: 397 kg.total power requirement: 5.5 kWrange L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price: 8.848 euros / special price on request Made in GermanyFurnishing:- with container and dryer / can be used immediately- Microprocessor control SOLID base control- Network pressure sensor- Belt driven drive system- low compressed air temperature due to effective aftercooler- lying underneath compressed air tank- including cold compressed air dryer automatically working with pre- and post-filter ( mounted )(also available with 7.5 bar)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

longitudinal travel: 400 mmcross travel: 160 mmtable length: - mmtable width: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

brinell hardness: - rockwell hardness: - throat: - mmweight of the machine ca.: - tdimensions of the machine ca.: - msclerometerDrive: 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: ISO 50 quill stroke: 150 mmturning speed range: 40 - 3600 U/mindrive motor: 22/33 kWswival range +/-: 23 °weight of the machine ca.: 0,8 tdimensions of the machine ca.: 1,811,2 mAssemblies for RAMBAUDI Rammatic 1201:1. milling head SK 50 / 22 kw / 40 - 3,600 min-1and:3. 30-fold tool magazine COSTELLI 7. measuring system / glass scale Heidenhain LS 706 C / ML 2840 mm8. measuring system / glass scale Heidenhain LS 706 C / ML 1140 mm 9. measuring system / glass scale Heidenhain LS 706 C / ML 1440 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: / mmthreading length: / mmthread pitch: / mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): mmthroat: mmbore stroke: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bed length: 2790 mmbed width: 2 x 240 mmbed height over floor: - total power requirement: 0 kWweight of the machine ca.: 5,6 tdimensions of the machine ca.: 3,51,61,6 mNo. 03022-station end trimming machine /cutting and centering machineEMAG, type TEC 2/1000 SSIEMENS System 3 controlWorking area: diam. 6.3-25 x 180-1000 mm, drive power: 12.5 kWAccessories:Loading gantry, chip conveyor, coolant device, internal coolant supply for station 1.coolant supply for station 1.The machine is equipped with 4 spindles, which are steplesslyinfinitely variable from 500-5000 rpm via separate DC motors.adjustable. Processing options: Grooving, peeling,turning, drilling (thread), thread chasing, chamfering, countersinking.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

balancing body min/max.: 0,1 - 1 kgbalancing body diameter w/o machining unit: 300 mmbalancing body diameter with machining unit: - total power requirement: 0,7 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 10,61,2 mNo. 0304Vertical balancing machine SCHENCK Z 35 EWorking range: max. test piece 300Control: Test piece weight 100 g - 1 kgDrive: .7The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

square edge steel: 16 x 16 mmflat steel: 100 x 5 mmL-beam: 60 x 8 mmround bar steel: 18.0 mmweight of the machine ca.: 33.0 kgProperties :- For precise cold and hot bending of flat, round and square steels- Sturdy design for bolting to the workbench- Infinitely adjustable bending stop with locking pin- With eccentric quick clamping for efficient working- Readable bending angle up to 120- High repeat accuracy thanks to bending angle stop- Ideal for repair workshops and locksmiths- - - - - - - - - -Cold bending capacityFlat steel 100 x 5 mm 65 x 10 mmRound steel 18.0 mmSquare steel 16 x 16 mmAngle steel 60 x 8 mmBending capacity hotFlat steel 100 x 15 mm 75 x 20 mmRound steel 27.0 mmSquare steel 25 x 25 mmAngle steel 100 x 12 mm- - - - - - - - - -Scope of delivery:- Bending plate sharp / round- Radius bending plate R 20 / R 25- Offset block- Bending plate for round bar- Offset plat ...

thread dia.: 1/4 bis 3 / 75 mmthreading length: ? mmthread pitch: ? mmturning speeds: 33 U/mintotal power requirement: 1 kWvoltage: 230 Vweight of the machine ca.: 0,074 tdimensions of the machine ca.: 1,20,81 m2 Die heads,4 sets of cutting dies,Pipe cutter, Foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: / mmturning length: / mmworkpiece length: / mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: Spannzangenaufnahme collet diameter: unbekannt turning speed range: 1,3 x der Antriebsdrehzah U/min: 165 mmdistance spindle - column: ? mmweight of the machine ca.: 28 kgdimensions of the machine ca.: 350350200 mmShipping weight: 35 kgPacking: ( ca. 400400400 ) mmNo. 55321 used Milling head BoKö / BOHNER & KÖHLE, type UFK 14 PInner taper of the milling spindle: Collet holderCollet diameter: unknownSpeed range: 1.3 x the drive speedBolt circle 165 mmWeight approx. 35 kgSize approx. 35 x 35 x 20 cmShipping weight approx. 35 kgShipping dimensions approx. 40 x 40 x 40 cmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3048 mmtable width: 1524 mmburner heads: 1 Control: CNC workpiece weight: 1450 kgtraversing speed: 200 m/minweight: 5010 kgdimensions of the machine ca.: 9450 x 2240 x 2520 mmLaser cutting machine with automatic shuttle tableConfiguration1. BodorPower laser source 12 kW2. BodorGenius laser cutting head with autofocus3. BodorThinker 3.0 control system4. Bed made of tenon and mortise structure5. Stretched aluminum portal6. One-click fully automatic processing7. Automatic layout of residual material8. Edge detection and automatic zeroing of the focal length throughintelligent detection9. Bodor Lightning perforation technology10. 21.5-inch monitor with touch function11. Intelligent control of gas pressure12. Automatic adjustment of cutting gas pressure13. Bodor Mango® ergonomic remote control14. Active anti-collision function15. Intelligent vibration protection16. Intelligent  ...

inner taper of milling spindel: SK 40 collet diameter: 0,5-25 turning speed range: 1900 - 6000 U/mindrive motor: 0,55 kWtotal power requirement: 0,55 kWweight of the machine ca.: 50 kgdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pulling force - max.: 16 tbroaching length max.: 1250 mmtable width: 400 mmbroaching speed: 1...6,4 m/minreturn speed: 19,5 m/mintool length - max.: 1500 mmtotal power requirement: 42 kWweight of the machine ca.: 16 tdimensions of the machine ca.: mSpecification: 2- jobs broaching right or left /right and left at the sametime Pulling force: max. 16 tMax. stroke length: 1,250 mmTable width: 400 mmBroaching speed: 1.0 – 6.4 m/minReturn speed: 19.5 m/minMax. tool length: 1,500 mmTotal power requirement: 42 kWMachine weight: approx. 16 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

degree: 500 working heigth: - mmlength: 600 mmwidth: 600 mmdepth: 600 mmtotal power requirement: 21 A / 14,5 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1 x 1 x 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool taper: 54 x SK 50 worktool system: 27 x System TUL Kelch Packing: 1200800350 mmShipping weight: ? kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 8 barliter capacity: 1,65 m³ / mindimensions: 1000 x 750 x 950 mmtotal power requirement: 11 kWweight of the machine ca.: 175 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

total power requirement: 38 kWdegree: 500 Gradweight of the machine ca.: 2,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area L-W-H: 10001150850 mmmanual operated rotary table: Ø accessories and equipment:: Absaugung Number of working hours: 600 hvoltage: 400 Vtotal power requirement: 0,4 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 222,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimension of workpiece: - mmvoltage: - Vaccessories and equipment:: ASUS All-in-One PC total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mhttp://www.ibendorf.de/ecmc.htmlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 1310 mmcutting diameter: 440 mmstroke: / mmweight of the machine ca.: 7,5 tSaw blade diameter: 1310 mm Cutting diameter: 440 mm Machine weight: approx.: 7.5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 630 mmtable load: 1 ttable height: 170 mmtotal power requirement: 0 kWweight of the machine ca.: 330 kgdimensions of the machine ca.: 900750170 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.