other metal working machines used for sale (10,893)

temperature max.: 1150 °muffle size (length): Ø 150 muffle size (width): Ø 150 muffle size (depth): 300 mmtotal power requirement: 3 kWweight of the machine ca.: 0,15 tdimensions of the machine ca.: 0,8 x 0,5 x 0,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 750 mmtable width: 550 mmampere: 60 AControl: Makino MGE20 x-travel: 600 mmy-travel: 400 mmz-travel: 250 mmworkpiece weight: 450 kgtool change unit: 8 total power requirement: kWweight of the machine ca.: 5,00 tdimensions of the machine ca.: 3,00 x 3,50 x H3,00 mDie-sinking machine with control MAKINO MGE20The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10.0 barEffective free air delivery: 1.950 L/minmotor: 400 V0: 250 Literweight of the machine ca.: 467 kg.total power requirement: 15.0 kWrange L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 13.576 euros / special price on request Made in GermanyFurnishing:- with container and dryer / can be used immediately- Microprocessor control SOLID base control- Network pressure sensor- Belt driven drive system- low compressed air temperature due to effective aftercooler- lying underneath compressed air tank- including cold compressed air dryer automatically working with pre- and post-filter ( mounted )(also available with 7.5 bar)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: ? mmpower requirement: 1 kWtotal power requirement: 1 kWweight of the machine ca.: ? tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10,0 barintake capacity: 727 L/minEffective free air delivery: 582 L/minReceiver capacity: 90,0 Ltr.motor: 400 Vpower capacity: 4,0 kWweight of the machine ca.: 91,0 kg.dimensions of the machine ca.: 1040 x 450 x 850 mmDescription :- mobile craftsman piston compressor- High-quality processed, 2-stage compressor block- with 2 cast iron cylinders and optimum efficiency- Finely ribbed cylinder and cylinder head for optimal temperature dissipation- low compressor speed to reduce the compression temperature and minimizing wear and tear- Very low residual oil content in the compressed air thanks to precision piston rings- Generously dimensioned solid rubber wheels and castors at the front- the start-up relief takes place via a mechanical vent valve- powder-coated compressed air tank in RAL 7035- Built in accordance with the European Pressure Equipment Directive- all fittings a ...

thread dia.: 20 Mturning speeds: 400 U/minthread: M 4 - M 20 Mworking area: 1900 Rmax.working range: 200 Rmin.Description:The AT models have a radius of up to 1900 mm and theirconstruction a flexible workspace. For professional use.Easy to mount on a worktop.Furnishing:- including 7 thread cutting inserts• M3 20111812 DIN 371 19• M6 20111823 DIN 371 31• M8 20111824 DIN 371 31• M10 20111826 DIN 371 31• M12 20111827 DIN 376 31• M16 20111829 DIN 376 31• M20 20111831 DIN 376 31- Control valve with lubrication- Including air motor- Adapter connection size 2- The cutting head can be pivoted vertically downwards by 90 °- The cutting head is pivoted and rotatable through 360 °- Operating instructions in German without the perforated table as per Fig.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Air consumption: 120 m³/hPressure power: 10 barpower requirement: 15 kWPacking: ca. 1,20,81,4 mShipping weight: 300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table-size: - mmvertical movement: - mmon behalf of the customer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool magazin:: 30 Stationen Shipping weight: ? kgPacking: ? mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 220 mmcontrol: Fabnuc OSPL 500 L turning diameter: 150 mmweight of the machine ca.: 4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece weight: 4 kgworkpiece length: 200 mmdia. on complete length: 200 mmControl: Schenck-Lauer electrics - voltage/frequency: 400 / 50 V/Hzdimensions: 4,1 x 4,2 x 2,5 mconnected load: 12 kVAflange diameter: 250 mmweight: 4,5 tBalancing machine for rotors - Turbocharger fuselage groups- hydraulic measuring station- Compensation station- Pulsation measuring table- Chip extraction- Measuring instrument CAB 950T- feeding device- Schenck/Lauer Control on Dase of WindowsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

voltage: 230 V: 200N dimension of workpiece: mmindex-arm vert. adjustable: xx mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 3 (VA), 4 (ST 40) mmcutting angle adjustment: 30 - 120 °cutting length: 200 mmthroat: 300 mmtable height: 900 mmwork stroke: max. 40 mmno. of strokes: max. 40 Hub/mintotal power requirement: 4 kWweight of the machine ca.: 2.000 kgdimensions of the machine ca.: 1500x1300x1400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: max. 700 mm: : max. 1 mm: Cutting capacity structural steel: max. 1 mmCutting capacity aluminum: max. 1 mmCutting capacity stainless steel: max. 0,5 mm: : max. 1 mm: max. 1,5 mmweight of the machine ca.: ca. 150 kgdimensions: 1200 x 400 x 1200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A total of 10 pieces, various brands, designs, and measuring ranges; further details see photos of the nameplates

A total of 10 pieces, various brands, designs, and measuring ranges; further details see photos of the nameplates

Technical data • Manufacturer: Komage • Model: S60 CNC • Year of construction: 2011 • Drive: Hydraulic • Press system: Flexible, modular press system based on the ejection method • Operating hours: approx. 20 hours • Total lifts: 3,207 For sale is a Komage S60 CNC powder press in exceptionally good condition. The machine was used exclusively for testing purposes and therefore has only approximately 20 operating hours and 3,207 strokes. The press is in near-mint condition, both technically and visually. There are no significant signs of wear. It is ideally suited for companies seeking a high-quality CNC powder press in virtually unused condition. Equipment • High-performance hydraulic powder press • CNC control • Flexible, modular press system • Ready for immediate use Find more here - .ucymachines/ Contact us at - sales@ucymachines

Auction-ID: A1-48745-218

Manufacturer: Kaltenbach Year of Manufacture: 2015 Model: MSK 471 NA Type of Machine: Long Goods Saw / Length-Cutting Saw Operating Hours: Approximately 12,000 hours Compressed Air Connection: 6 bar Operating Voltage: 3x 400V, 50Hz Total Nominal Current: 100A Optional Equipment: Rod guide available Condition: Used, functional Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: FASTEMS Year of Manufacture: 2012 Model: MLS-MD Type of Machine: Multi-Level System Medium Duty Technical Specifications: - Control: Fastems MMS4 - Power Consumption: 71 kVA - Current: 56A - Power Supply: 400V AC, 50/60Hz - Compressed Air Connection: 6.5 bar - Dimensions: Approximately 23m length x 5.1m height - Shelf Spaces: 84 total (61 spaces at 630mm height, 23 spaces at 885mm height) - Pallet Size: 630 x 630mm - Handling Weight: 1,500 kg - Equipment / Setup Bays: 2 - Originally Designed For: 3x GROB G550 - Prepared For: 3 machines - Axes: 3 axes - X-axis (travel motion of storage and retrieval unit), Y-axis (lifting motion), Z-axis - (load handling device) - Cooling System: Yes, leakage oil extraction system - Maximum Speed of Storage and Retrieval Unit: 0 to 2.5 m/s - Pallet Change: Yes - Scope of Delivery: Shelf storage, storage and retrieval machine, and setup  ...

Manufacturer: FASTEMS Year of Manufacture: 2007 Model: MLS-MD Type of Machine: Multi-Level System Medium Duty (MLS-MD) - Linear Pallet Storage System Technical Specifications: - Control: Fastems MMS4 - Current: 3x63A - Power Supply: 400V AC, 50/60Hz - Compressed Air Connection: 6.5 bar - Dimensions: Approximately 18.5m length x 5.1m height - Shelf Spaces: 42 total, maximum height 1095mm each - Pallet Size: 630 x 500m - Handling Weight: 1,500 kg - Equipment / Setup Bays: 2 - Designed For: 2x Heller FP4000 - Axes: 3 axes - X-axis (travel motion of storage and retrieval unit), Y-axis (lifting motion), Z-axis (load handling device) - Cooling System: Yes, leakage oil extraction system - Maximum Speed of Storage and Retrieval Unit: 0 to 2.5 m/s - Pallet Change: Yes - Special Feature: Retrofit performed in 2017 - Scope of Delivery: Shelf storage, storage and retrieval machine, and setup st ...

Manufacturer: Indunorm Year of Manufacture: 2015 Model: Indumatik MZA-006 Type of Machine: Linear Pallet Handling System Technical Specifications: - Control: induCell - Power Consumption: 3 kVA - Current: 5A - Power Supply: 400V AC - Compressed Air Connection: Greater than 6 bar - Machine Weight: 1,600 kg - Dimensions: Approximately 6,100mm x 3,510mm - Axes: 5 axes total. X-axis, Y-axis, Z-axis and C-axis active. A-axis and B-axis not present. - Cooling System: None - Pallet Spaces: 32 - Pallet Size: 500 x 500mm - Handling Weight: 150 kg - Pallet Change: Yes - Operating Hours: No operating hour counter installed - Scope of Delivery: Complete handling system - Note: This system was previously operated with a DMG MORI DMU50. The DMU50 is not included in this sale. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Trumpf Year of Manufacture: 2005 Model: TrumaBend S 700-45 Type of Machine: CNC Hydraulic Press Brake Technical Specifications: - Working Length: 4,550mm - Pressing Force: 7,000 kN (approximately 700 tonnes) - Weight: 49,000 kg - Oil Quantity: 700 liters - Operating Voltage: 3 x 400V AC, 50Hz - Control Voltage: 24V - Control Type: ModEva 12S (Cybelec) - Main Fuse Nominal Current: 200A - Connected Load: 69 kW - Distance Between Machine Frames: 3,500mm - Maximum Bending Length: 4,550mm at a bending depth of 590mm - Bending Arm (without tool): 490mm. Obstruction edge protrudes 300mm from the bending arm. - Maximum Bending Depth at 3,500mm Length: 1,750mm for single bends, 1,250mm for Z-bends Hours are being check, but it was used in 2x shift operation. Will be available end of the year. No tools included, only the machine The machine has been running continuously for  ...