other metal working machines used for sale (10,892)

Manufacturer: Indunorm Year of Manufacture: 2015 Model: Indumatik MZA-006 Type of Machine: Linear Pallet Handling System Technical Specifications: - Control: induCell - Power Consumption: 3 kVA - Current: 5A - Power Supply: 400V AC - Compressed Air Connection: Greater than 6 bar - Machine Weight: 1,600 kg - Dimensions: Approximately 6,100mm x 3,510mm - Axes: 5 axes total. X-axis, Y-axis, Z-axis and C-axis active. A-axis and B-axis not present. - Cooling System: None - Pallet Spaces: 32 - Pallet Size: 500 x 500mm - Handling Weight: 150 kg - Pallet Change: Yes - Operating Hours: No operating hour counter installed - Scope of Delivery: Complete handling system - Note: This system was previously operated with a DMG MORI DMU50. The DMU50 is not included in this sale. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Trumpf Year of Manufacture: 2005 Model: TrumaBend S 700-45 Type of Machine: CNC Hydraulic Press Brake Technical Specifications: - Working Length: 4,550mm - Pressing Force: 7,000 kN (approximately 700 tonnes) - Weight: 49,000 kg - Oil Quantity: 700 liters - Operating Voltage: 3 x 400V AC, 50Hz - Control Voltage: 24V - Control Type: ModEva 12S (Cybelec) - Main Fuse Nominal Current: 200A - Connected Load: 69 kW - Distance Between Machine Frames: 3,500mm - Maximum Bending Length: 4,550mm at a bending depth of 590mm - Bending Arm (without tool): 490mm. Obstruction edge protrudes 300mm from the bending arm. - Maximum Bending Depth at 3,500mm Length: 1,750mm for single bends, 1,250mm for Z-bends Hours are being check, but it was used in 2x shift operation. Will be available end of the year. No tools included, only the machine The machine has been running continuously for  ...

CO2 laser cutter Manufacturer: Trumpf Model: TruLaser Cell 7040 Type of Machine: TruLaser Cell 7040 Year of Manufacture: 2007 Laser Power: 5000W Beam ON Hours: 9,039 System ON Hours: 59,226 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Tool holder, milling chuck, collet chuck, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Tool holder: Adjusting sleeve Ø28 mm -Type: F28X2X75 -Recording: MK2 -Quantity: 2x adjusting sleeves available -Price: per piece -Dimensions: Ø 40 x 170 mm -Total weight: 0.6 kg/pc.

sheet width: 1550 mmplate thickness: 6 mmdiameter of upper rolls: 228 mmdrive: elektronisch zwei angetri The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tweight of the machine ca.: 4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1500 mmplate thickness: 5 mmweight: 3,8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. ram stroke: 600 mmthroat: ca. 400 – 800 mmtable diameter: - mm: 320 mm total power requirement: - kWweight of the machine ca.: 8 tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter max.: 1-150 mmregulating wheel width: 100-200 mmweight: 5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Dreistern roll forming machine is offered. Main drive power: 9.2kW, production direction: right to left, roll shaft diameter: 30mm, roll shaft connection: 20mm, tooling width of roll stand type 1: 135mm, center distance of type 1: 130mm, adjustment range of type 1: 60mm-100mm, tooling width of roll stand type 2: 210mm, center distance of type 2: 260mm, adjustment range of type 2: 80mm-130mm, control system: Siemens SIMATIC HMI. The gearbox has been fully overhauled. Inspection by appointment is possible.

0-10 mm precision dial gauge with 0.01 mm accuracy, complete with magnetic base. This set is designed for extremely precise control of the geometric shapes of various components and to ensure their correct positioning within other components. Auction-ID: A7-49208-53

: rechts Ausklink / links S fence: elektronisch ja /neinfoot pedal: mechanisch weight of the machine ca.: 1,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rump wire belt blasting machine type Xedura 1500, good condition, serviced 1x per year

Jet house with screw compressor and boiler - Maintenance 1x a year Blast Chamber Size: 2500x2500mm

with osmosis device, oil separator and drip pan Dimensions: width x depth x height = 4.1m x 7.1m x 4.1m (double bottom tray) Workpiece for machining max.: width x depth x height= 1m x 5.2m x 2.1m

CONTROLS  CNC controls SIEMENS 840 D SL CHARACTERISTICS HEAT TREATMENT EQUIPMENT  heating method: induction DIMENSIONS / WEIGHTS  space requirements -left/right-: 8044 mm  space requirements -front/back-: 8046 mm  total height: 4000 mmELECTRICAL SPECIFICATIONS  mains power supply: 624 kVAPower Data:Mains connection power: 624 kVAMains voltage: 400 VRated current: 900 AMains frequency: 50 HzTransformer:Power: 560 kVAVoltage: 400 / 580 VCurrent: 809 / 558 AFrequency: 50 HzConverter:Power: 552 kVA / 450 kWVoltage: 750 VCurrent: 667 AFrequency: 6 – 10 kHzStarting:Power: 50 kWVoltage: 400 VCurrent: 90 AFrequency: 50 HzAuxiliary Equipment:Voltage: 400 VCurrent: 25 AFrequency: 50 HzControl Voltage:Voltage: 230 / 24 VCurrent: 5 / 40 AFrequency: 50 Hz / DCAutomation KUKA Roboter

CONTROLS  electronic controls BOSCH REXROTH CML 40.2 SURFACE TREATMENT, USABLE PROCESS SPACE / ZONE  length: 50 mm  diameter: 700 mmELECTRICAL SPECIFICATIONS  total power consumption: 100 kWThe machine processes workpieces with an outer diameter of 20–50 mm and lengths between 300 and 700 mm. With a cycle time of approximately 20 seconds, it enables high production speeds whilst maintaining consistent quality.

Available 3/2027 after medium overhaulSiemens S840 DISO 502-axis head K4,000 rpm1,000 Nm30 kW2,000 x 8,000 mm7,000 mm2,800 mm1,100 mm2,550 mm40 tools

CNC pipe bending machine Type: CNC 65 TBRE Manufacturer: CSM Year: 2010 Maximum pipe diameter: 65 mm Steel (≈ 400 MPa): Ø 65 × 2.0 mm Stainless steel (≈ 600 MPa): Ø 65 × 1.4 mm Aluminum: Ø 65 × 3.5 mm Solid round material: Ø 30 mm Maximum bending angle: 190° Machine weight: 4400 kg In good condition, fully functional Find more here - .ucymachines/ Contact us at - sales@ucymachines

sheet width: 2000 mmplate thickness: max. 4000 mmmake: 2974 rear stop: ja foot pedal: ja degree: steuerbar weight of the machine ca.: 3,93 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Workbench, work table, assembly bench, assembly table, work table, base -Base frame: Work table tubular frame frame with mounting plates for swivel casters -Width: 1200 mm -Depth: 800 mm -Height: 720 mm -Quantity: 1x workbench available -Weight: 29 kg

Key data: 600 mm, 400 mm, 310 mm

High-quality FANUC wire EDM machine in top condition. The machine is well-maintained, ready for operation and is suitable for precise wire EDM work in tool, mould and precision machine construction. Manufacturer: FANUC Model: ROBOCUT α-1iD Type: A04B-0320-B001 #E5 Machine No.: P089D1671 Year of manufacture: 09/2008 Control: FANUC Series 310iS-WA Machine Type: CNC Wire EDM Machine X-axis: 600 mm Y-axis: 400 mm Z-axis: 310 mm U-axis: 200 mm V-axis: 200 mm Rapid traverse X: 900 mm/min Rapid traverse Y: 900 mm/min Rapid traverse Z: 900 mm/min Rapid traverse U: 450 mm/min Rapid traverse V: 450 mm/min Max. workpiece weight: 1,000 kg Machine weight: 3,000 kg Mains connection: 200 V AC, 3-phase, 50/60 Hz Connected load: 13 kVA Automatic threading of the wire Processing in a full bath Suitable wire diameter: 0.10-0.30 mm Condition: Top Condition Location: Freiburg

Manufacturer: SURFIN Year 2020 Condition Used Stock number 9377 Air capacity: 26000 m³/h Internal dimensions of the machine (LxWxH): 6000 x 4000 x 2800 mm Drying up to 60 °C, Electrical connection: 24 kW, Including E1 – air supply and E2 – exhaust air; E3 – Exhaust gas discharge optional by arrangement.

Some information about the condition: Classic-3S • High-pressure pump defective (pictures attached), machine ran without any worries so far • 08.08.2023: X+Y spindles overhauled, therefore backlash-free • 07.10.2024: new U-motor installed Progress 2 • Machine functional, cuts easily at low generator levels and when finishing • Problems occur at high roughing levels because the lower gap box has a defect • 26.06.2023: X+Y spindles overhauled, therefore backlash-free • September 2024: new U-motor installed • September 2025: new stern-motor installed and timing belt renewed

CONTROLS  electronic controls ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1500 mm  space requirements -front/back-: 1250 mm  total height: 2100 mm- Polishing cell C710 (1970 houres in production)Equipment of the machine:Collaborative UR3 e-series robot with intuitive HMIAutomatic compensation for tool wearPolishing station Crevoisier C5100 (drive polishing tools)Spindle for holding standard Crevoisier colletsIntegrated suction with 14m/sRenishaw measuring probe for position detectionPalletizing for approx. 40 STK 2 Pal.Two polishing paste dispensers with a capacity of three liters each

Workbench, work table, assembly bench, assembly table, worktable, wooden workbench table, aluminum workbench table -Workbench: Workbench table with drawers / solid construction, height adjustable -Width: 2000 mm -Depth: 800 mm -Height: 830 mm, adjustable, see photos -Weight: 74 kg

Workbench, work table, assembly bench, assembly table, worktable, wooden workbench table, aluminum workbench table -Workbench: Workbench table with drawers / solid construction, height adjustable -Width: 2000 mm -Depth: 800 mm -Height: 760 mm, adjustable, see photos -Weight: 74 kg